When I did the front on my 08 brute, I put the bearings in the freezer. Also get a new 20v dewalt impact 1/2" 700 ftlbs torque! 1200 ft lbs breaking strength. Who needs Thor's hammer when you have his impact?!
Aaron Haas I have the new Milwaukee 2767-20 1400 ft lbs of nut busting torque 1000 ft lbs of fastening torque. Hasn't been anything I can't take off yet. I even use it to change tires on 18 wheelers with no problems. A real beast of a portable impact. I tried it out when I got it on a 1 ton ford lug nut. I tightened it until it it broke. Very easy. So you do have to be careful with it set the power level down. Lol
Aaron Haas yes it does no more pneumatic impacts for me. I carry mine in the truck, and use it every day. The 9.0 amp hour battery last so long. You can rotate all tires on a 1 ton at least 10 with one charge absolutely amazing technology. Thanks for commenting
Great video I changed a cv axle on my wife's arctic cat 700 mudpro. Thought axle would just pop out of the diff. Wrong they built the axles with a pin in the center that doesn't let the axle come out because of the angle it is in. They come with 14" clearance from factory. Heavy duty axles factory. Could not find a original replacement. Had to go with a non heavy duty. Can you get a demon heavy duty axle for it and how much? 2012 arctic cat 700 mudpro Ltd. Thanks
I've watched what you do off and on and finally subscribed. How do these demon axles compare to the other HD brand axles Gorilla, HighLifter, Rhino and Titan
When ever I do need Axel I will for sure get theses I like watching all brute force videos I can find I will keep you in mind first thing I'm wanting to do is put duel exhaust when my warranty is out in the spring any suggestions on that
Hey man. I bought a 2019 xmr 850 and broke the right rear cv axle. I've tried the demon hd and the rhino 2.0. They are both too short. By like a 1" or so. No one makes one for a 2019. But I think they would be the same as a 18. Some help would be greatly appreciated
Powermodz, I’ve got a 2010 brute force 750 and it started running HOT the other day. Hot as in a flamethrower to the left calf kind of hot. I’m replacing the fan breaker to see if that’s the cause of that. Also I found the oil smells like gas, level was above high. I’m going to change it and keep a close eye on it. Any idea what could be causing this? I replaced the spark plugs to see if that will help. Hoping it’s not injectors because they are buried deep in the brute force jungle. Also the driveshaft seal has oil dripping out of it. Please help ! Thank you.
I heard that demon makes the mudpro axle where I live they are $300 each that is why I'm looking elsewhere. Hopefully powermodz.com has them . we have a 2012 mudpro
@@PowerModzOfficial where do I get these axles or something similar to this for my 05 650 brute sra , I need better ones for the front ...its basically a prairie...but i looked on yalls website and couldn't find the axles
I've changed all 4 axles in my 2013 brute 750 as soon as I bought it and put gorilla axles all around
When I did the front on my 08 brute, I put the bearings in the freezer. Also get a new 20v dewalt impact 1/2" 700 ftlbs torque! 1200 ft lbs breaking strength. Who needs Thor's hammer when you have his impact?!
Aaron Haas I have the new Milwaukee 2767-20 1400 ft lbs of nut busting torque 1000 ft lbs of fastening torque. Hasn't been anything I can't take off yet. I even use it to change tires on 18 wheelers with no problems. A real beast of a portable impact. I tried it out when I got it on a 1 ton ford lug nut. I tightened it until it it broke. Very easy. So you do have to be careful with it set the power level down. Lol
the new tech on tools is amazing. Life gets easier as far as that goes!
Aaron Haas yes it does no more pneumatic impacts for me. I carry mine in the truck, and use it every day. The 9.0 amp hour battery last so long. You can rotate all tires on a 1 ton at least 10 with one charge absolutely amazing technology. Thanks for commenting
New belt install 2012 bruteforce750 and it takes half throttle just to get it moving...sometimes. Next time it's fine any thoughts?
Man I wish my brute had the parts your did! I wish I had the money to do it lol.
Great video I changed a cv axle on my wife's arctic cat 700 mudpro. Thought axle would just pop out of the diff. Wrong they built the axles with a pin in the center that doesn't let the axle come out because of the angle it is in. They come with 14" clearance from factory. Heavy duty axles factory. Could not find a original replacement. Had to go with a non heavy duty. Can you get a demon heavy duty axle for it and how much? 2012 arctic cat 700 mudpro Ltd. Thanks
mark Minyard that sux bud
I've watched what you do off and on and finally subscribed. How do these demon axles compare to the other HD brand axles Gorilla, HighLifter, Rhino and Titan
The bearing carrier was that cast aluminum you heated?why i ask my polaris sportsman is and gonna do the bearing
If there is any differential oil in the diff will it pour out when you pull the old axle out?
No it wont come out from the axle location it should be a seperate area
When ever I do need Axel I will for sure get theses I like watching all brute force videos I can find I will keep you in mind first thing I'm wanting to do is put duel exhaust when my warranty is out in the spring any suggestions on that
Empire if you have the funds or Hmf
Hey man. I bought a 2019 xmr 850 and broke the right rear cv axle. I've tried the demon hd and the rhino 2.0. They are both too short. By like a 1" or so. No one makes one for a 2019. But I think they would be the same as a 18. Some help would be greatly appreciated
Its good axle hd or slashers its better??? Tanks
What year? I’m looking to buy one but having issues with the straight axel and independent. What’s you opinion on the two?
Go independent
It's better to use a impact gun to put that nut back on the axle. Useing that wrench is brutal on the axle
If you really got that press in 1989 that is very impressive. They do last forever but that's awesome if it's true.😄😄💯
100 percent true!
Powermodz, I’ve got a 2010 brute force 750 and it started running HOT the other day. Hot as in a flamethrower to the left calf kind of hot. I’m replacing the fan breaker to see if that’s the cause of that. Also I found the oil smells like gas, level was above high. I’m going to change it and keep a close eye on it. Any idea what could be causing this? I replaced the spark plugs to see if that will help. Hoping it’s not injectors because they are buried deep in the brute force jungle. Also the driveshaft seal has oil dripping out of it. Please help ! Thank you.
change the oil and see what happens - if it keeps collecting then you need to address that issue - im pretty sure that could be your reason.
Look at upgrading the crappy stock fan to a nicer unit, they run WAY more quiet and suck/push more air. Fairly easy swap out.
Hey, you able to get those Demon axles for a 14 Mudpro 700? my cat keeps snapping axles
pretty sure I can, are you able to send me a message through my contact for on my website? powermodz.com/contact-us
I heard that demon makes the mudpro axle where I live they are $300 each that is why I'm looking elsewhere. Hopefully powermodz.com has them . we have a 2012 mudpro
mark Minyard hey mark best thing to do is contact me thru my website all ill get right back to you. does yours have a lift?
PowerModz I sent you a message let me know if you don't get it please. Thanks
@@PowerModzOfficial where do I get these axles or something similar to this for my 05 650 brute sra , I need better ones for the front ...its basically a prairie...but i looked on yalls website and couldn't find the axles
I have a 2017 grizzly 700 and I'm looking for a rad relocate kit for it what would they cost shipped to prince edward island canada
How does liking a question help any lol
My quad is 19 years old
My quad is 32 years old
@@tommygleason238 mines 35
what spacers are these
Well done
Are those 1 or 2 inch wheel spacers?
i tihnk 2 -
what happened to snowmobiles????
xtidnab it's too hot out! Sleds will be back just before winter :) boys gotta play year round!
I'm back again 😎
Wears safety glasses. Uses chrome socket for impact lol
puuuure geeeeeeniusssssss
@@PowerModzOfficial its good axle for Renegade 800??
@@PowerModzOfficial good axel or Rhino its better?
First
power wash your atv before you do any job
We try....
@@PowerModzOfficial any videos of the warrior snorkels install on the brute force 750?
@@DerekRC no sorry
Get a real torch set dude.
I have a set....60 miles away.