Disappointment...this Video was WAAAAAY too short, I was enjoying those comparisons soo much. How about...scissors, pliers, flashlights, literally every other category. I'd watch them all.
Honestly in 2024 it’s pretty much a gimmick. I drink a lot of beer and 99.99% of it is in cans. They’re so superior to bottles it doesn’t make much sense to have more than 1 opener.
I will say, there is one note I want to mention regarding the fancy box cutter - the action it uses for deployment makes it what is known as a gravity knife, and gravity knives are typically lumped in with switchblades in a lot of laws, which _could_ make that knife in particular illegal in some areas due to its mechanism despite its purpose of being a utility knife. Fantastic video, though! Very well edited, and the audio design was top-notch!
I was recently searching for this type of things and you helped me with some really good references, my friend. I would like to get a video like this but about good modern wallets.
Dudee I got one that looks like it came straight out of cyberpunk 2077, it's called the Vionentus VN100 and it even has an AirTag slot, I'm sure Johnny Silverhand would use it.
As much as I love multi-bit screwdrivers, the intended use needs to be considered. I do a lot of electrical work which often requires accessing screws that are in recesses. Standard 1" long bits won't reach. My go-to multi-bit is the Wiha slimline. Expensive, but the best I have come up with so far. The Milwaukee fastback 6-in-1 lives in my pocket at work.
@@Random-ed2xf You're right... it does look interesting. It might be worth it as something to keep in the glove compartment of the car or something. Not really pocket sized with the bit set, but it carries phillips and flat on-board and that will get you pretty far. Won't help with my screws in recesses, but for general use it certainly beats the daylights out of my ancient Leatherman Wave in the screw driving department.
The brand he shows off at the end Picquic makes the original 6-pack. Trust me, if you think you like the milwaukee, get a picquic. I recommend the hvac one with reversible 1/4" and 5/16" drivers in the shaft.
@@erikjones9585 I'm Canadian. I have had many Picquic screwdrivers. It pains me that the Robertson tips they supply fit worse than those from our American friends, when Robertson tips are a Canadian concept. My biggest issue with Picquic is that the tips only have the last 3/8" of them ground. Above that short grind is the 1/4" hex shaft. If you are turning a small screw in a sensor or in a terminal block that kind of tip often won't fit. You need the depth. My current go-to multi is a Wiha slim-line insulated. That gives me several inches of reduced diameter. I am aware that Picquic has the Multique which has a narrower hex, I bought one to try it out, but the tip assortment is too reduced to be a regular carry item.
I got a lot of my tools free or at a yard sale, so they are a bit knocked around and uncool. For house related work, they all work just fine, but its when I am biking long distances or far away from home, a smaller, more convenient toolset is key to getting home safe. All of the tools in this video I can carry in a pocket or bag, which is awesome!
I got a set of Wera Joker self-adjusting wrenches for Christmas one year, and man-oh-man, do I love not having to fiddle with an adjusting wheel to get the perfect fit on a nut or bolt in my shop.
7:25 I agree, I always carry my fastback 6-1 and a normal pocket knife. The ease of not having to sharpen is nice about the utility knives but sometimes the small blades just don’t cut it lol 😂
Came here to also recommend that Milwaukee cutter. My regular pocket knife is a Kershaw Fire. which has a similar screwdriver mechanism and storage for 4 bits built into the handle. Considering I need a screwdriver at least as often as I need a knife, these are both great options to have on hand all the time.
I have an olight OPen Pro. I love it, I work in the trades and often have to rig from building structure. My pen has a built-in laser pointer, so I can easily indicate what I'm talking about. I also have to sign a lot of paperwork, so that's handy, and in my day-to-day life, I've used the small flashlight in the clip as a hands free light. I either clip it to my sweater or shirt pocket or hold it in my mouth. You could carry a bic, or you could carry a pen/laser pointer/flashlight. Their new model even has a light up tip for taking notes in the dark and charges wirelessly.
For "Fancy box cutter, that's absolutely (technically) not worth it, but you smile every time you use it and it lasts for life", I'd take a look at the Keen knife from Studio Neat! Good video. :)
@@GrevMarkussen i probably wouldn't spent THIS much money on it, but I'm seriously considering either the civivi elementum utility, or the Nuknives Kumpanter. The price tag is bearable and oh god how I love using my elementum at work, but how I hate destroying it by doing so...
Rotary box cutter for breaking down boxes is one of the best tools I've ever bought. Not because it's an awesome tool (though it does end up being easier for breaking down a lot of boxes) but because my spouse loves it and it is the rare case where she had to admit my tool obsessions paid off.
it's kind of vague as to what classifies as a "gravity knife" between different states and countries, so in the case of where i live it would be "gravity assisted" or "assisted opening" because of the switch lock, but if i drive 3 hours away it's a guaranteed felony. and in some places boxcutters are treated differently than normal knives, so check your local laws there's a lot more nuance and variety in legislature then people realize.
Gravity knives are only illegal in 7 states, of which only 4 of those directly name gravity knives as illegal, where the others are a bit more ambiguous. Only 14% of states make it illegal, so I'd say it's fair to showcase it here.
LTT Screwdriver is actually genuinely good. I thought it was dumb until my partner got me one. I ended up buying the stubby when it came out too because I liked the original so much.
Hi Maurice! If you haven’t already, it’s well worth checking out the PB Swiss 6464 - a great pocket screwdriver I’ve been daily driving at work and at home for about a year now and is superb quality! Lots of colours available too
Loved this video, and my sons will love their new Zippo bit set on Christmas morning! I need to watch a few more of your videos so I can finish up my holiday shopping 😁
I edc a sak tinker - the most used screwdriver set, even though I have a ratcheting snap on driver I love. Sak is Philips and flat, pry bar (large flat) and knife for everything.
Id recommend for screwdrivers the Klein adjustable length stubby 8 in one and standard 14 in one They can be found at the orange bucket store in a set for under 25$ As klein model 85516 The adjustable length is great and is one of the most comfortable mini screwdrivers I've ever handled
I'd love to see another "regular tool" video. Whether that's more well thought out comparisons (I'm going to pick up a bunch of the standard tools you showed because I never knew they existed and look extremely handy) or taking some recommendations from the comments section and ordering some new pieces of kit.
Thanks for explaining that Wiha is a German company. These days, I see a name brand that sounds foreign, I just assume it's fly-by-night Chinese and keep moving. So I'll actually look into Wiha's stuff. I genuinely appreciate the tidbit, as I haven't heard anyone else include it when mentioning the brand on gear mentions.
If the zippo bit driver had a built in ratchet... That would be insane. On another note, my favourite utility knife has been the titaner raven. Using big olfa ckb2 blades, twice as thick as standard utility blades, and much more blade is actually usable. I carry it every day and swap the blade to a comb when i really shouldn't have a knife with me.
Maybe it's just that I always also have a ratcheting driver handy, but I found very little actual use for the driver on the Milwaukee 6in1. For less than $15, the Milwaukee fastback without the driver has replaced the more complicated option.
I own a victorinox swiss army knife as my daily tool, pretty regular stuff, BUT, it's a limited edition that costs about 4x more than the usual victorinox. So I guess it's both regular and cool at the same time? Most people call me insane for daily using a collector's edition but eh, the wood handle feels better in the hand lol.
The Milwaukee Fastback is the best utility knife evA!! In my work, measuring a space quickly is best done with a Bosch laser tape measure. Fast. Accurate. Easy. I know there are apps and scanners that will take a full room view and have their purpose, but these scanners have a ton of information I don’t need. I’ve been diagraming and measuring structures for so long that there is still not a scanner/app that can beat me, especially when you factor in the setup and download time.
well since this is already a video about light tools and i have a fairly specific niche i might as well flex a lil in my left pocket there are always: 1. a multitool but smol, i mean 50 x 25 x 20 mm levels of small, you can now pinch really hard, remove most common screws, cut wood and open packages and everything else you could do with a regular multitool 2. a smol flashlight, barely anything more than the AAA battery within, in most cases quicker than your phone + waterproof + no worries if it falls + when its cold you dont need to remove your gloves 3. a lighter, i dont smoke, but you never know when you need to anneal a spring, melt some plastic or set a house on fire i mean make a small campfire 4. a swiss army knife, i unironically use the bottle opener on it to open my water bottle, also holy crap its still sharp after 2 years of abuse and no sharpening 5. a regular good ol' pocket knife, cuz you never know when you need to stab something or someone also 2 pens on my belt for better access, one is eraseable
Simple box cutters: Gerber EAB or Gerber Superknife SK. Seriously, the best box cutters I've owned by far. I still have an original design Superknife from before Gerber bought them out. It's at least 25 years old now... Simplicity at it's best!
That "fancy" ratcheting driver looks nice, but I guarantee it's kind of bad on two areas that are pretty critical for a ratcheting driver: how much you have to turn it to set the next ratchet points, and how much backdrag it has. Most ratcheting screwdrivers use a cog and pawl setup with pretty fine teeth, though the backdrag can vary. At that price you could buy both the regular and stubby LTT ratcheting drivers. Fiskars makes an even better folding utility knife. It was basically the only one in Project Farm's tests that survived.
For general use I would go with the FastBack. I just used it today. I have seen the "cool" one, but if I needed to EDC it, I would go with the $25 Olight Otacle U1 Carbon Fiber Small Folding Tool. I have carried it a lot, comfortable and fast to deploy with its rail or bar lock. The Otacle U1 is also good for trips if one suddenly has to carry it through TSA, just dispose of the blade, and get a new utility blade later. One caution, make sure the retention screw can be turned by hand. I liked it so much I bought a spare and found I had to carefully use a small pair of Knipex Cobra pliers to turn it. Once turned a couple of times it was fine for hand turning. Easy at home, not so much if you are trying to catch a flight. Maybe it had loctite, was over tightened, had some grit from manufacturing, whatever. It just reinforced the principle of always know and check your equipment first before depending on it.
I’ve added that little O knife to my wishlist. I edc a Maker Knife, and have a handful of fastbacks and alternatives in various tool boxes. The O looks like a nice edc alternative for travel. I fly carry-on with an “empty” utility knife. Acquiring blades at my destination. Never had the tool body confiscated - but there has been some negotiation at times. I need a tool I can walk away from if I’m at risk of missing my flight. That’s not the case with the “unobtainium” Maker Knife. I’m also a fan of the mini cobra by Knipex. So much so that I crafted a leather pocket slip for carrying mine. A match to the Maker Knife’s pancake holster.
Little FYI: DO NOT SEPARATE YOUR GRANDPARENT'S ZIPPO JACKET FROM IT'S ORIGINAL INSERT!!! DO NOT!!! Repeat: DO NOT SEPARATE YOUR GRANDPARENT'S ZIPPO JACKET FROM IT'S ORIGINAL INSERT!!! Please keep those together. They both could have the same manufacturing date numbers and they keep value if they match. If they don't you should check their manufacturing dates to see how vintage they are. If they are from the same era you might still be able to conserve most of the vintage value since they don't necessarily always match precisely. That said, Zippos are very popular in some places more than others. I would suggest asking at a bar or rest stop for a lost and found and getting a free jacket from that. Love the design. I am totally getting that tool insert. Thanks for the content!!! 😁👍
In the utility knife realm, unless I’m sailing or (boat) rigging, my EDC knife is a Maker Knife by Giacco Whatever/Placed Atoms, equipped with a ceramic blade. I lost track of it for an extended period - I’d set it down in a seldom used drawer of my camera cabinet…and closed the drawer. I was heartbroken to have lost it, and overjoyed when it turned up. All of the substitutes I tried in the interim did the job, but none filled the role as elegantly.
I don't know if they are "cool," but I like 711L products including the Lollipop driver and ratchets, the Steinwhale stubby 10 in 1 bit kit with extender, the LeverGear Edge XT pry bar with retractable exacto, and the LeverGear charging cable.
The snap on 5ACP midget pliers were one of my main tools. The grip was so secure that I could clamp onto stripped bolt heads and just twist them out, even the mushroom head ones.
Please do an episode on flashlights if you have not already done so. Flashlight technology has advanced so much in recent years so I'm interested to know of recent developments.
That one I don't know. Now the price is kind of crazy, but for a driver to carry every day I don't think anything beats the ones made by big idea designs.
Thanks for the awesome tools and with the lovely holidays around the corner you have given me some great ideas for a present for my dad. I keep a multi tool in my bag. It has some weight so if necessary and I get lucky great for self defense and bonus for me it looks like a throwing star I do love the look of it for that. It is by TF Takeflight Tactical.
I actually backed the MetMo pocket driver. Did it entirely because it was a cool gadget with a fun mechanism, absolutely not something I needed. Have yet to actually use it for the intended purpose, so until then it's a neat fidget toy.
OUTDOOR EDGE utility knife small, uses regular blades and best part... spring deployed so with a push of a button it is fast to put away. recommended by Scott Yu-Jan. so yeah
Given choice I'd rather not use high quality bits in Power Pint, it moves the poibt of failure to the tool itself and that gear mechanism, alltough great for handling force if the plier was probably not made for taking high torque.
Based on the thumbnail, I thought you'd compare a Zippo lighter to something like a Bic. The Zippo is cool--why else would it be THE lighter in so many movie scenes?--but having to maintain it, and the higher cost to buy it make the Bic more practical (in many ways). ...but I ENJOY the Zippo so much that I only have a Bic for back-up. :-)
@@niceguy191 That’s a longtime standard practice for interchangeable bit screwdrivers. A “six-in-one” is two reversible bits in a reversible shaft that serves as two nut drivers. (7-in-1 if the naked handle itself can also turn a nut.)
@@riggerjeff I guess as long as they call them "features" then no prob, it's calling them "tools" that's the stretch. Like with your example, the 7-in-1 is saying 7 features in one tool. That's a bit different from multitools as they are specifically a combination of multiple different tools, not just one tool with many features/accessories. Plenty of outliers and grey areas of course.
Serious question. I replaced the Civivi on my wishlist with the O Knife because of alleged issues with the blade retaining screw backing out on the former. What has your experience been?
@@riggerjeff no issues so far, I use it daily and so far its perfect, in case it backs out you can use locktight blue a tiny drop so it locks up and its easily release by hand without applying heat (compared to locktight red)
Disappointment...this Video was WAAAAAY too short, I was enjoying those comparisons soo much. How about...scissors, pliers, flashlights, literally every other category. I'd watch them all.
Stick to your own crappy page.
Buddy the majority of your vids are less than twelve minutes long, shut up.
@@CoreyBaraniukCringe, maybe stick to yours too.
@whitesmith5985 comes with the territory, some people are just having a bad day.
@@maxlvledclove your channel. I watch it daily. Stoked to see you here
When anthropologists thousands of years from now dig up our ruins they are going to wonder why all these things come with bottle openers.
Honestly in 2024 it’s pretty much a gimmick. I drink a lot of beer and 99.99% of it is in cans. They’re so superior to bottles it doesn’t make much sense to have more than 1 opener.
I always see it as such a waste of engineering when there are compromises to include it
@@vercingetorix444 There's a psychological feeling that a bottled drink is better than a can
@@NyGeL_Derey not in my brain
@@Feuillo I forgot to emphasize: *glass* bottles
I will say, there is one note I want to mention regarding the fancy box cutter - the action it uses for deployment makes it what is known as a gravity knife, and gravity knives are typically lumped in with switchblades in a lot of laws, which _could_ make that knife in particular illegal in some areas due to its mechanism despite its purpose of being a utility knife.
Fantastic video, though! Very well edited, and the audio design was top-notch!
the reate may be illegal where you live because it is considered a gravity knife and gravity knives are stupidly illegal in most places
I was thinking that too
I feel like its gonna get a bunch of tradies unfortunately bothered by cops
which is funny because my traditional pocket knifes open way faster and in any orientation
I was recently searching for this type of things and you helped me with some really good references, my friend. I would like to get a video like this but about good modern wallets.
Dudee I got one that looks like it came straight out of cyberpunk 2077, it's called the Vionentus VN100 and it even has an AirTag slot, I'm sure Johnny Silverhand would use it.
yesss is one of those games that didn't deserve so much neglect at the time! hahah
It is!! And believe me when I tell you that it has all the look and feel of night city haha
bro I really love the whole aesthetic of that game!!
Two hidden gems that I actually use daily are both Japanese tool makers, Lobster Crescent wrenches and Vessel screwdrivers.
Excellent choices
As much as I love multi-bit screwdrivers, the intended use needs to be considered. I do a lot of electrical work which often requires accessing screws that are in recesses. Standard 1" long bits won't reach. My go-to multi-bit is the Wiha slimline. Expensive, but the best I have come up with so far.
The Milwaukee fastback 6-in-1 lives in my pocket at work.
@@mikegraham7078 Gerber center drive?
Gerber Center Drive looks interesting.
@@Random-ed2xf You're right... it does look interesting. It might be worth it as something to keep in the glove compartment of the car or something. Not really pocket sized with the bit set, but it carries phillips and flat on-board and that will get you pretty far. Won't help with my screws in recesses, but for general use it certainly beats the daylights out of my ancient Leatherman Wave in the screw driving department.
The brand he shows off at the end Picquic makes the original 6-pack. Trust me, if you think you like the milwaukee, get a picquic. I recommend the hvac one with reversible 1/4" and 5/16" drivers in the shaft.
@@erikjones9585 I'm Canadian. I have had many Picquic screwdrivers. It pains me that the Robertson tips they supply fit worse than those from our American friends, when Robertson tips are a Canadian concept.
My biggest issue with Picquic is that the tips only have the last 3/8" of them ground. Above that short grind is the 1/4" hex shaft. If you are turning a small screw in a sensor or in a terminal block that kind of tip often won't fit. You need the depth. My current go-to multi is a Wiha slim-line insulated. That gives me several inches of reduced diameter. I am aware that Picquic has the Multique which has a narrower hex, I bought one to try it out, but the tip assortment is too reduced to be a regular carry item.
I got a lot of my tools free or at a yard sale, so they are a bit knocked around and uncool. For house related work, they all work just fine, but its when I am biking long distances or far away from home, a smaller, more convenient toolset is key to getting home safe. All of the tools in this video I can carry in a pocket or bag, which is awesome!
I got a set of Wera Joker self-adjusting wrenches for Christmas one year, and man-oh-man, do I love not having to fiddle with an adjusting wheel to get the perfect fit on a nut or bolt in my shop.
7:25
I agree, I always carry my fastback 6-1 and a normal pocket knife. The ease of not having to sharpen is nice about the utility knives but sometimes the small blades just don’t cut it lol 😂
Came here to also recommend that Milwaukee cutter. My regular pocket knife is a Kershaw Fire. which has a similar screwdriver mechanism and storage for 4 bits built into the handle. Considering I need a screwdriver at least as often as I need a knife, these are both great options to have on hand all the time.
I have an olight OPen Pro. I love it, I work in the trades and often have to rig from building structure. My pen has a built-in laser pointer, so I can easily indicate what I'm talking about. I also have to sign a lot of paperwork, so that's handy, and in my day-to-day life, I've used the small flashlight in the clip as a hands free light. I either clip it to my sweater or shirt pocket or hold it in my mouth.
You could carry a bic, or you could carry a pen/laser pointer/flashlight.
Their new model even has a light up tip for taking notes in the dark and charges wirelessly.
For "Fancy box cutter, that's absolutely (technically) not worth it, but you smile every time you use it and it lasts for life", I'd take a look at the Keen knife from Studio Neat!
Good video. :)
@@GrevMarkussen i probably wouldn't spent THIS much money on it, but I'm seriously considering either the civivi elementum utility, or the Nuknives Kumpanter. The price tag is bearable and oh god how I love using my elementum at work, but how I hate destroying it by doing so...
@@thehillbomberthose are nice! I went with the cheaper OKnife Otacle U1 which is similar.
Rotary box cutter for breaking down boxes is one of the best tools I've ever bought. Not because it's an awesome tool (though it does end up being easier for breaking down a lot of boxes) but because my spouse loves it and it is the rare case where she had to admit my tool obsessions paid off.
Another fantastic video. Awesome showcase of the products' features, pros, and cons.
Part of my EDC, is the Stanley 14 in 1 multi tool. With 4 sockets, (10mm,11mm,12mm,13mm) saw, knife, file, and 6 hex bits.
Isn't that expensive knife illegal in multiple states since its a gravity knife? 😂
it's kind of vague as to what classifies as a "gravity knife" between different states and countries, so in the case of where i live it would be "gravity assisted" or "assisted opening" because of the switch lock, but if i drive 3 hours away it's a guaranteed felony. and in some places boxcutters are treated differently than normal knives, so check your local laws there's a lot more nuance and variety in legislature then people realize.
Gravity knives are only illegal in 7 states, of which only 4 of those directly name gravity knives as illegal, where the others are a bit more ambiguous. Only 14% of states make it illegal, so I'd say it's fair to showcase it here.
First 2 tools in and I love them both. Haven't seen that Zippo tool before. It's awesome.
I love my tiny little Gerber Dime. I go almost nowhere without it.
personally i just use a 20 dollar non fancy swiss army knife for my tools🤣🤣
@@karldavar
Rambler is my pick!
I used to have to wait till we went for a plane ride to see stuff like this as a kid. Good ole sky mall
How have I not heard of this channel before?? Subscribed within 3 minutes. Great stuff!
Agree. His videos are fantastic!
This video was on point! Thanks very much, I need some upgrades for in home tools, perfect timing!
LTT Screwdriver is actually genuinely good. I thought it was dumb until my partner got me one. I ended up buying the stubby when it came out too because I liked the original so much.
Hi Maurice! If you haven’t already, it’s well worth checking out the PB Swiss 6464 - a great pocket screwdriver I’ve been daily driving at work and at home for about a year now and is superb quality!
Lots of colours available too
Loved this video, and my sons will love their new Zippo bit set on Christmas morning! I need to watch a few more of your videos so I can finish up my holiday shopping 😁
I don't think ever clicked a link and bought something as fast as did that zippo driver. Awesome. Thanks!
@@rswearing me too. This channel costing me money.
I carry a 6-in-1 all the time at work, along with a Teng Tools set of bits. They've come in pretty handy at work.
While fancy tools - especially new ones - tend to be 'meh', I really like the design of that Metmo ratcheting driver.
I edc a sak tinker - the most used screwdriver set, even though I have a ratcheting snap on driver I love. Sak is Philips and flat, pry bar (large flat) and knife for everything.
Excellent video, Moe! Sick tool I love using: the fastback. Sick tool I didnt know about and now I need, the compact driver! So coo, man.
Id recommend for screwdrivers the Klein adjustable length stubby 8 in one and standard 14 in one
They can be found at the orange bucket store in a set for under 25$
As klein model 85516
The adjustable length is great and is one of the most comfortable mini screwdrivers I've ever handled
Now I know what I'm getting my son for Christmas.
I've been looking for something like that Wera stubby screwdriver. Going to order it. Thanks!
That zippo driver is INSANELY AWESOME!
That company picquic you have at the end in an orange stubby makes a "lighter" style multibit for like $5 that is way better than the zippo one!
Thought the title said Regular Tools vs Cow Tools for a second
I'd love to see another "regular tool" video. Whether that's more well thought out comparisons (I'm going to pick up a bunch of the standard tools you showed because I never knew they existed and look extremely handy) or taking some recommendations from the comments section and ordering some new pieces of kit.
I have a SOG Power Pint and love it. Carry it everyday.
Excellent presentation! And legit cool tool choices
Thanks for explaining that Wiha is a German company. These days, I see a name brand that sounds foreign, I just assume it's fly-by-night Chinese and keep moving. So I'll actually look into Wiha's stuff. I genuinely appreciate the tidbit, as I haven't heard anyone else include it when mentioning the brand on gear mentions.
I'm kinda a Wera fanboy, I really like the "Zyklops" and "Koloss" ratchets. They might be a good fit for a part 2
If the zippo bit driver had a built in ratchet... That would be insane.
On another note, my favourite utility knife has been the titaner raven. Using big olfa ckb2 blades, twice as thick as standard utility blades, and much more blade is actually usable. I carry it every day and swap the blade to a comb when i really shouldn't have a knife with me.
Maybe it's just that I always also have a ratcheting driver handy, but I found very little actual use for the driver on the Milwaukee 6in1. For less than $15, the Milwaukee fastback without the driver has replaced the more complicated option.
I own a victorinox swiss army knife as my daily tool, pretty regular stuff, BUT, it's a limited edition that costs about 4x more than the usual victorinox. So I guess it's both regular and cool at the same time? Most people call me insane for daily using a collector's edition but eh, the wood handle feels better in the hand lol.
Like Maurice said, tools are meant to be used!
OH MANNN! this is my video !
I can't remember the last time I needed a screwdriver in a emergency. A flathead that works as a scrapper or pry bar, sure.
The Milwaukee Fastback is the best utility knife evA!!
In my work, measuring a space quickly is best done with a Bosch laser tape measure. Fast. Accurate. Easy. I know there are apps and scanners that will take a full room view and have their purpose, but these scanners have a ton of information I don’t need. I’ve been diagraming and measuring structures for so long that there is still not a scanner/app that can beat me, especially when you factor in the setup and download time.
well since this is already a video about light tools and i have a fairly specific niche i might as well flex a lil
in my left pocket there are always:
1. a multitool but smol, i mean 50 x 25 x 20 mm levels of small, you can now pinch really hard, remove most common screws, cut wood and open packages and everything else you could do with a regular multitool
2. a smol flashlight, barely anything more than the AAA battery within, in most cases quicker than your phone + waterproof + no worries if it falls + when its cold you dont need to remove your gloves
3. a lighter, i dont smoke, but you never know when you need to anneal a spring, melt some plastic or set a house on fire i mean make a small campfire
4. a swiss army knife, i unironically use the bottle opener on it to open my water bottle, also holy crap its still sharp after 2 years of abuse and no sharpening
5. a regular good ol' pocket knife, cuz you never know when you need to stab something or someone
also 2 pens on my belt for better access, one is eraseable
maurice does not MISS
fact
What was the knife he recommended with the Milwaukee Utility knife?
Civivi Elementum
@@maxlvledc thanks
My niche, use-it-everyday tool is the CW&T Herring Blade.
How do you like it? Have always wanted one but could never justify it. I have one of their pens though haha
the hart mini utility knife. many brands make the same style, but its aluminum and barely larger than a utility knife itself
What's the finish of that Civivi Elementum at 7:36?!?! I can't seem to find it anywhere.
Simple box cutters: Gerber EAB or Gerber Superknife SK. Seriously, the best box cutters I've owned by far. I still have an original design Superknife from before Gerber bought them out. It's at least 25 years old now... Simplicity at it's best!
Good vid. I liked the fancy utility blade and the zippo insert. Probably gonna get the zippo driver 👍🏻🤟🏻
I wonder if the XOU box cutter is considered a gravity knife, because that's unfortunately illegal in many places if so
Even your regular tools are super fancy. I didn’t even know zippo made a bit insert.
That "fancy" ratcheting driver looks nice, but I guarantee it's kind of bad on two areas that are pretty critical for a ratcheting driver: how much you have to turn it to set the next ratchet points, and how much backdrag it has. Most ratcheting screwdrivers use a cog and pawl setup with pretty fine teeth, though the backdrag can vary. At that price you could buy both the regular and stubby LTT ratcheting drivers.
Fiskars makes an even better folding utility knife. It was basically the only one in Project Farm's tests that survived.
For general use I would go with the FastBack. I just used it today. I have seen the "cool" one, but if I needed to EDC it, I would go with the $25 Olight Otacle U1 Carbon Fiber Small Folding Tool. I have carried it a lot, comfortable and fast to deploy with its rail or bar lock. The Otacle U1 is also good for trips if one suddenly has to carry it through TSA, just dispose of the blade, and get a new utility blade later. One caution, make sure the retention screw can be turned by hand. I liked it so much I bought a spare and found I had to carefully use a small pair of Knipex Cobra pliers to turn it. Once turned a couple of times it was fine for hand turning. Easy at home, not so much if you are trying to catch a flight. Maybe it had loctite, was over tightened, had some grit from manufacturing, whatever. It just reinforced the principle of always know and check your equipment first before depending on it.
I’ve added that little O knife to my wishlist. I edc a Maker Knife, and have a handful of fastbacks and alternatives in various tool boxes. The O looks like a nice edc alternative for travel. I fly carry-on with an “empty” utility knife. Acquiring blades at my destination. Never had the tool body confiscated - but there has been some negotiation at times. I need a tool I can walk away from if I’m at risk of missing my flight. That’s not the case with the “unobtainium” Maker Knife.
I’m also a fan of the mini cobra by Knipex. So much so that I crafted a leather pocket slip for carrying mine. A match to the Maker Knife’s pancake holster.
These tools are cool and beautiful!😊
Little FYI: DO NOT SEPARATE YOUR GRANDPARENT'S ZIPPO JACKET FROM IT'S ORIGINAL INSERT!!! DO NOT!!! Repeat: DO NOT SEPARATE YOUR GRANDPARENT'S ZIPPO JACKET FROM IT'S ORIGINAL INSERT!!! Please keep those together. They both could have the same manufacturing date numbers and they keep value if they match. If they don't you should check their manufacturing dates to see how vintage they are. If they are from the same era you might still be able to conserve most of the vintage value since they don't necessarily always match precisely. That said, Zippos are very popular in some places more than others. I would suggest asking at a bar or rest stop for a lost and found and getting a free jacket from that.
Love the design. I am totally getting that tool insert. Thanks for the content!!! 😁👍
Well said, I was thinking the same thing when he said that
Good to know, but I doubt most people care all that much about the monetary value of sentimental herilooms.
Did you cut your finger during the boxcutter segment?
In the utility knife realm, unless I’m sailing or (boat) rigging, my EDC knife is a Maker Knife by Giacco Whatever/Placed Atoms, equipped with a ceramic blade. I lost track of it for an extended period - I’d set it down in a seldom used drawer of my camera cabinet…and closed the drawer. I was heartbroken to have lost it, and overjoyed when it turned up. All of the substitutes I tried in the interim did the job, but none filled the role as elegantly.
Who makes the pouch that you showed at 4m:38s?
very sharp at 5:54!
I don't know if they are "cool," but I like 711L products including the Lollipop driver and ratchets, the Steinwhale stubby 10 in 1 bit kit with extender, the LeverGear Edge XT pry bar with retractable exacto, and the LeverGear charging cable.
I just watched an Earthling EDC video where Phil just showed the 711L and that Steinwhale Bit Kit that he put on his pocket rack.
@@donaldstrader7241 Yes, I saw that! Glad he's giving it a shot.
Speaking of tool, will you created another batch of SPEC-DNT - No-touch keyring tool ?
The snap on 5ACP midget pliers were one of my main tools. The grip was so secure that I could clamp onto stripped bolt heads and just twist them out, even the mushroom head ones.
Please do an episode on flashlights if you have not already done so. Flashlight technology has advanced so much in recent years so I'm interested to know of recent developments.
Isn’t the orange box cutter a gravity knife technically? And illegal in a lot of areas (like Ontario?)
I carry a James Brand utility knife, which is clean and easy to use.
2:08 i would buy this if it housed a bit extension in there as well. because to only have a half inch of reach does not appeal to me.
That last box cutter can be classified as a "gravity knife," which are illegal in some locations
As someone who owns the fastback, I would go with that knife 10/10 times
Really nicely made video, good stuff!
Hey Todd! Happy to see that you watch some videos that I do! Hope you get verified soon!
Another great video, keep going! (The background music is a bit annoying, sorry.)
Thank you
That one I don't know. Now the price is kind of crazy, but for a driver to carry every day I don't think anything beats the ones made by big idea designs.
Thanks for the awesome tools and with the lovely holidays around the corner you have given me some great ideas for a present for my dad. I keep a multi tool in my bag. It has some weight so if necessary and I get lucky great for self defense and bonus for me it looks like a throwing star I do love the look of it for that. It is by TF Takeflight Tactical.
With regard to box cutters, a ceramic is a much better material for this use as it doesn't lose the edge like regular box cutter blades.
Yep.
Though the best literal all-day, every-day “box cutter” is the serrated Canary cardboard knife from Japan.
You can have gravity knives?
Whoa, I did not know about that Milwakee Fastback! Want... 🤤
I actually backed the MetMo pocket driver. Did it entirely because it was a cool gadget with a fun mechanism, absolutely not something I needed. Have yet to actually use it for the intended purpose, so until then it's a neat fidget toy.
I love my exo-u.
I am however a sucker for things that are purple
Is that fancy box cutter legal? Seems like a gravity knife 🤔
what do you mean boxes need to be cut down to no more than 18 inches at any flat side?
nice video btw
The 'regular' tools in this video all seem like novelty gimmicks to me 😂 I guess I'm a simple man with simple tools
OUTDOOR EDGE utility knife
small, uses regular blades and best part... spring deployed so with a push of a button it is fast to put away.
recommended by Scott Yu-Jan. so yeah
Tanjiro compact screwdriver is cute.
Interesting video ❤
gotta try the LTT ratchetting driver
Given choice I'd rather not use high quality bits in Power Pint, it moves the poibt of failure to the tool itself and that gear mechanism, alltough great for handling force if the plier was probably not made for taking high torque.
Based on the thumbnail, I thought you'd compare a Zippo lighter to something like a Bic. The Zippo is cool--why else would it be THE lighter in so many movie scenes?--but having to maintain it, and the higher cost to buy it make the Bic more practical (in many ways).
...but I ENJOY the Zippo so much that I only have a Bic for back-up. :-)
I literally just bought the Civivi Utility knife
That Milwaukee knife counting the bit holder as three tools with the bit is quite the stretch...
@@niceguy191 That’s a longtime standard practice for interchangeable bit screwdrivers. A “six-in-one” is two reversible bits in a reversible shaft that serves as two nut drivers. (7-in-1 if the naked handle itself can also turn a nut.)
@@riggerjeff I guess as long as they call them "features" then no prob, it's calling them "tools" that's the stretch. Like with your example, the 7-in-1 is saying 7 features in one tool.
That's a bit different from multitools as they are specifically a combination of multiple different tools, not just one tool with many features/accessories. Plenty of outliers and grey areas of course.
“The most common tool” I didn’t even know ratcheting screwdrivers existed
I prefere the pb swiss stubby over the wera. Additonally the Knipex CutiX is a nice box cutter.
Great video
Civivi new box cutter knife is lit, my new edc
Serious question. I replaced the Civivi on my wishlist with the O Knife because of alleged issues with the blade retaining screw backing out on the former. What has your experience been?
@@riggerjeff no issues so far, I use it daily and so far its perfect, in case it backs out you can use locktight blue a tiny drop so it locks up and its easily release by hand without applying heat (compared to locktight red)
@@artenox7579 Thank you for the report.
Idk I have a red box cutter that looks shiny while being functional. I call it Scarlett. 😅