@@mainstay. I am new to the hobby and started projects mid lockdowns, so tac gear is limited. They are very low-profile, but that is a very good question. I just saw these previewed and had to try them out.
This is a pretty cool accessory, well done Than! I really love the purple mags but a turquoise one would also be awesome. Congratulations in advance on the new baby Luke!
I think maybe having 3D printed barrel spacers for the nexus pro to swap it over to a brass barrel and then one of the spacers would have an o ring for proper fitment. There is a rear one and a front one. Having them 3D printed would make sure the seal is good and the alignment is also good. I used to use a 17/32 brass barrel I got from your shop with a 175 FPS cap to get a projected 200 FPS. The darts overtime would crush down a bit making the fit looser but it was still a ripper way better than the stock barrel. I stopped because there were reliability issues with the seal and the barrel coming out because I used tape to make the fit tight on both ends making the fit not very air tight and prone to coming out. I was also worried about the alignment of the barrel for accuracy. I shoot about 40-60 feet and consistently hit a 2-3 inch diameter circle (the bottom of a small can). I used a red dot from a crossbow though because the iron sights are not the best. Maybe you could also 3D print a more accurate iron sight that would be better for lining up small targets from far. The x axis is super accurate and straight but to be expected at different distances, the y axis will change, but not by much with the pro darts. That gun is so good and has so much potential. I am getting my friend that has loads of real guns to buy one because of the performance, accuracy, customizability (with Picatinny rails, stocks, grips), and the price of the ammo and the gun is just insane. I am so excited to see what you do with the gun.
I think Gold would make for a cool Talon Mag. Easy to spot and be very differant from workers 4 colors plus now they also have the glow in the dark one too. Congrats too Luke and Family!! :)
I saw this product on the website before, was that the Katana version? also in Walcom's video there was a demolisher barrel for the little rocket, when is that and the wrist mounts going to be available because I will be getting loads of parts and I want to have those shipped before February. Thanks in advance...
Have you done any durability testing on the mag extenders? I'm curious if they can survive drops on concrete during emergency reloads. Maybe they would need some type of padding?
Great video , if you can't do a bright green then how about another green, maybe a forest or some other dark green, I think in the translucent mag that would be cool
Wait, "other companies have claimed certain colors as their "exclusive" colors"? Is that why there's no longer neon translucent green available for the Jupiter listing on the online shop? Dangit, I really wanted one in black and neon trans green...
Aw,no neon or translucent green variant u can do? Well that would be my choice but really anything translucent would be great. Painting things clear is really difficult so it’s nice when it’s just sold that way.
#outofdarts I would love to see an even bigger capacity of maggs & extenders. I would also say any shades of pink, magenta, fuchsia would be nice aswell! Shades of other purples aswell would be nice. Also, would these extenders work on the mags with the curved ends (such as the tachi)?
Good man to support those comming up with the new products rather than copying them. You are right... nothing protects his idea... and ‘copying’ the CAD work is easy enough. Comming up with ‘what’ to design that is in need for a huge amount of people and/or creates ‘want’ in many is the added vallue of good designers and inventors. Copying their work will demotivate the hell out of them. Again: good of you to support those creating the added value. The world would be a better place if more people had your vision in that regard. Have I missed it or did you forget to mention how much capacity the extenders add? :-) Keep up the great work and content my friend.
Luv luv my 18 round banana clips i got from you !! These are cool for the contrasting color design aspect - im assuming you cant use these on the bottoms of the banana clips to make those into 21 rounders??? Encouraging other designers =AWESOME -for myself i would REALLY love some purple banana clips -or clear color ones to enjoy the look of the darts inside the mag
Wait, WHO has fluorescent green mags? I need more clear radioactive looking stuff in my life. The mags might be claimed, but you could make these extenders in neon green n such yeah?
You can find the Thanhlon d-mag, which is basicly a short dart drum mag, on thingiverse. Unfortunatly I do not know anyone who sells them at the moment;)
I spent more time than i care to admit trying to push the tab thingys inward, thinking that it would unlatch the thing and it would come out, until i realized you have to push the tab thingys upward. I am in pain edit: typo
![[Comparison] Worker Talon and Jet Katana Magazines](http://i.ytimg.com/vi/Of1Zb_jRsyI/mqdefault.jpg)
![CAMPปลิ้น | EP.83[1/2] เปิดแคมป์หลอนต้อนรับ 2 ตัวพ่อแห่งวงการผี!](http://i.ytimg.com/vi/2uPuHYHgwiI/mqdefault.jpg)
Let us know which exclusive color Talon Mags you'd like to see in the shop next!
I think Pink magazines would sell quite well.
Stop making my bank account suffer please
I think pink or dark green would be cool
I would love to see yellow
@Sandwich meat productions Oh most definitely lol
Congrats on a new baby soon!!
Luke: Maybe some day we’ll offer something super high capacity.
Tachi 29 rounder: May I introduce myself?
My favorite part is that Luke is willing to support others in the hobby, instead of just taking the idea for himself!
PS: Congrats on the new baby!
lol, the perfect timing with the tachi mag plug when he talks about the high capacity mag
I have been running these for a while now and I love them. Those purple mags are delicious. I wish I had a blaster that they would go with.
Do they still fit in whatever mag pouch/holder that you have, I wondered if they make it a tight fit.
@@mainstay. I am new to the hobby and started projects mid lockdowns, so tac gear is limited. They are very low-profile, but that is a very good question. I just saw these previewed and had to try them out.
This is a pretty cool accessory, well done Than! I really love the purple mags but a turquoise one would also be awesome. Congratulations in advance on the new baby Luke!
I think maybe having 3D printed barrel spacers for the nexus pro to swap it over to a brass barrel and then one of the spacers would have an o ring for proper fitment. There is a rear one and a front one. Having them 3D printed would make sure the seal is good and the alignment is also good. I used to use a 17/32 brass barrel I got from your shop with a 175 FPS cap to get a projected 200 FPS. The darts overtime would crush down a bit making the fit looser but it was still a ripper way better than the stock barrel. I stopped because there were reliability issues with the seal and the barrel coming out because I used tape to make the fit tight on both ends making the fit not very air tight and prone to coming out. I was also worried about the alignment of the barrel for accuracy. I shoot about 40-60 feet and consistently hit a 2-3 inch diameter circle (the bottom of a small can). I used a red dot from a crossbow though because the iron sights are not the best. Maybe you could also 3D print a more accurate iron sight that would be better for lining up small targets from far. The x axis is super accurate and straight but to be expected at different distances, the y axis will change, but not by much with the pro darts. That gun is so good and has so much potential. I am getting my friend that has loads of real guns to buy one because of the performance, accuracy, customizability (with Picatinny rails, stocks, grips), and the price of the ammo and the gun is just insane. I am so excited to see what you do with the gun.
I think Gold would make for a cool Talon Mag. Easy to spot and be very differant from workers 4 colors plus now they also have the glow in the dark one too.
Congrats too Luke and Family!! :)
My sons name on his ADL jersey is Plum Crazy and he runs a 22” Caliburn that’s dark purple so loved the purple mags when they became available.
Congratulations on your upcoming new arrival
Oh man, Thanh is brilliant. Looking forward to this team up.
Congrats, Luke and family!
Congrats on the new kid!!
I saw this product on the website before, was that the Katana version?
also in Walcom's video there was a demolisher barrel for the little rocket, when is that and the wrist mounts going to be available because I will be getting loads of parts and I want to have those shipped before February. Thanks in advance...
Pretty sure they release items on the store before they release videos on them
@@kav9533 probably
Its kinda bizarre seeing you comment out of character on an out of darts video no less
@@thatoneasiankid8734 Give me a break will you, I just want to have one hobby where I can also use sabers or do modifications to make it civilised...
Congratulations! And as far as exclusive mag colors, maybe a forest green
Congrats on the new arrival!
Great idea! Time to get my calipers and fusion 360 ready.
congrats on the new kid!!
Great video as always Luke!
Have you done any durability testing on the mag extenders? I'm curious if they can survive drops on concrete during emergency reloads. Maybe they would need some type of padding?
Mag extensions!!..... Pretty cool!
Congrats on the baby!
I hope we get an extended mag mod for the DZ MK2 someday
That would be cool- we probably will eventually I hopeeee
Great video , if you can't do a bright green then how about another green, maybe a forest or some other dark green, I think in the translucent mag that would be cool
A pink talon mag would be sweet!
I like this because you can use the stock spring
1:31 this is what we call foreshadowing ladies and gentlemen
You should make the end of the extender into a speed plate design!
TAN oh and congrats on the baby
Wait, "other companies have claimed certain colors as their "exclusive" colors"? Is that why there's no longer neon translucent green available for the Jupiter listing on the online shop? Dangit, I really wanted one in black and neon trans green...
Aw,no neon or translucent green variant u can do? Well that would be my choice but really anything translucent would be great. Painting things clear is really difficult so it’s nice when it’s just sold that way.
Just waiting on orange, black, or clear talon mags to come back in stock and then will order these with those
Translucent green next please. Sell em with a half dart conversion kit for the Spectrum
#outofdarts I would love to see an even bigger capacity of maggs & extenders. I would also say any shades of pink, magenta, fuchsia would be nice aswell! Shades of other purples aswell would be nice. Also, would these extenders work on the mags with the curved ends (such as the tachi)?
Congratulations
Can you drop the stls please?
Good man to support those comming up with the new products rather than copying them. You are right... nothing protects his idea... and ‘copying’ the CAD work is easy enough. Comming up with ‘what’ to design that is in need for a huge amount of people and/or creates ‘want’ in many is the added vallue of good designers and inventors. Copying their work will demotivate the hell out of them. Again: good of you to support those creating the added value. The world would be a better place if more people had your vision in that regard.
Have I missed it or did you forget to mention how much capacity the extenders add? :-)
Keep up the great work and content my friend.
They add +5 or +6 dart capacity depending on the size you purchase
@@outofdarts Ohh that is quite good! Does the spring lose a lot of force in effect lowering the max DPS or is it not noticeable?
It's not a noticeable difference in follower performance.
Works only for Worker talons? Curious if this works for XYL’s or if there’s a different one for it out there
I might be the only one, but I'd like a yellow mag.
you are not the only one Kevin I would love to see that!!
dark green or brown mags would be awesome
18 curved vs 21 straight... well I'm using worker 22's right now, and they're massive.
I would love to see a Cyan or a Turquoise Talon Magazine
Mazel tov on the new Foam Flinger for the family!
With the adaptor attached, does the mag still fit in a regular 'mag - holder' ?
Luv luv my 18 round banana clips i got from you !! These are cool for the contrasting color design aspect - im assuming you cant use these on the bottoms of the banana clips to make those into 21 rounders??? Encouraging other designers =AWESOME -for myself i would REALLY love some purple banana clips -or clear color ones to enjoy the look of the darts inside the mag
From what I understand you can, but the springs are the same length between the 15&18 rounders so it runs into feeding issues.
Are Talon mags in color gradients an option?
Congratulations!
1:32 foreshadowing
Would you ever 3D print a drum?
Are there files available for these in case I wanted to print them in a specific filament?
Olright, you can extend the mag, but can you also make the magazines a little shorter with this? (i just need 7 or 8 shots, i am a homeplinker)
Worker makes a 10 round short mag that doesn’t use an adaptor.
Do you have a release date for the arm mount
I'd love to see a bright neon yellow mag or hot pink! I'm needing new mags now that I painted a blaster😭😭😭
I would love to see a white talon mag
Lime Green! Florescent green is a bit more yellow than Lime.
Also available through Viking Foam Arms in Europe!
vikingfoamarms.com/product/talon-extra-edge/
Solid orange would be nice
I would love to have a yellow mag
neon blue mags
id buy like 10 of them
I'd like to see a lime green. Similar to the color on the modulus Stryfe.
Neon green
Can you do multi-color?
You should do a mix
I would like pink talons
Would it be possible to make a mag extension for rival mags
Worker sells 15 round rival mags kind of cool
I just got the 39 mag for the half links will these work to make it take even more?
No, but we do have a mag extender for our 29-dart mags coming soon! - Perry
@@outofdarts thank you
Wait, WHO has fluorescent green mags? I need more clear radioactive looking stuff in my life. The mags might be claimed, but you could make these extenders in neon green n such yeah?
Love from india ❤️❤️ congrats...
even though it would be like 9 years late could you do a rapidstrike mod guide
Can you restock the headshot ammo
Make a drum mag for half length darts
You can find the Thanhlon d-mag, which is basicly a short dart drum mag, on thingiverse. Unfortunatly I do not know anyone who sells them at the moment;)
www.etsy.com/listing/716639290/nerf-thanhlon-talon-mag?ref=shop_home_active_2
I spent more time than i care to admit trying to push the tab thingys inward, thinking that it would unlatch the thing and it would come out, until i realized you have to push the tab thingys upward. I am in pain
edit: typo
Teal/cyan Talon Mags
I wish I could get a tiny 18 round drum magazine for this thing.
Then I wish I could actually get one
Why 18 round? That'd be less capacity then these.
@@Uff-dada you have a point. I just think 20 would be too little of an addition and 25 would be a bit much to manufacture
This is Good
Custom color pink
Do they stack
No, the extenders are not designed to be stacked.
Hi
1:32 !! half dart 50 drum mag !! PLEASE!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
just got my dzp mk 2 and waiting for it to come
Nice!
Can u send me nexus pro,they aren’t available were I live
You in Canada?
One comment and I can’t see it it probably says first
Talon drum mags
Early
Talon drum
Wow if you can do this, please extend the dz mk 2 mag to come out the bottom. Then make it so long its like a katana melee weapon.
Fast
im sorry but this channel is dying. i just thought i would say this.
There average seems to be about 20k and 15k and some 2k and 5k with 80k subs it seems seems decent