QueenAnt V2 Super Enhanced X&Z

Super Enhanced X & Z V2
Customers have been suffering from Flexing of the X-axis for a long time when working with 2.2KW or heavier spindles.And this is obvious when the spindle is working on harder materials and longer X-axis of machines.The torsional force of the spindle causes the X-axis to twist and cause displacement of the workpiece, resulting in a loss of accuracy.
The V1 has been avoids flexing as much as possible by filling 2040V-slot into 4080 C Beam Rails and add support on Back.
The YUYONG INDUSTRY team redesigned the entire X-axis, added a strong 4080 C-Beam on the back, and flipped the original X-axis 4080. Through the extrusion of two 4080, a 4040 gap was formed inside, which was filled with 4040. This results in a super-strength 8080 X-axis.Twist resistance has been improved by more than 4 times after many test and compares!
X&Z Balance Force
In previous CNC machines, the whole Z axis with spindle attach to X plate,this causes the X-axis to only be stressed on one side, and when a 2.2KW or heavier spindle is attached, it may cause vibrations when the spindle is working, which will also cause loss of accuracy and flexing of the X-axis.
By attaching extra linear rail to back, and use a thick plate connect front and back plate,It not only balances the force on one side, but also greatly improves the verticality of the X axis. When the Z axis is attached, it also avoids the vibration of the spindle during operation and the shaking after a long time.
QueenAnt PRO Full Kit(Website): yuyongindustry...
QueenAnt PRO Full Kit(Aliexpress): yuyongindustry...
QueenAnt PRO Mechanical kit(Website): yuyongindustry...
QueenAnt Full Kit：yuyongindustry...
QueenAnt PRO Mechanical kit(Aliexpress):www.aliexpress...
QueenAnt PRO Mechanical kit(website):yuyongindustry...
WorkBee Upgrade to QueenAnt PRO: www.aliexpress...
QueenBee Upgrade to QueenAnt PRO: www.aliexpress...

[@philtitus7860]

Is there an upgrade kit available to turn v1 into enhanced v2? I haven't assembled my v1 kit yet

[@MrIzaks]

is your QueenAnt Pro V2 supplied with the enhanced X&Z on your Aliexpress store?

[@yuyongindustry]

Yes, Mark, if it shows V2, then it's Enhanced X&Z

[@bulletproofsaws]

If I have a lead 1515 and want to upgrade to the ball screws and heavier 8080 etc is there a way to do this? And upgrade kit?

[@yuyongindustry]

Hi, yes, we have uograde kit from lead cnc to queenant, contact us via [e-mail]

[@bulletproofsaws]

@@yuyongindustry Will do, Thank you!

[@bbcustomprojects]

you really need my shop to do a video for you....you should contact me