Simple RFID control servo motor for smart door lock system using arduino
ฝัง
- เผยแพร่เมื่อ 22 ส.ค. 2019
- Hello everyone,
In this video I will show you how you can make a simple RFID home security system for you door lock
Components required...(affiliate link present)
1. Arduino uno....amzn.to/2NzapDr
2. RFID ...............amzn.to/2L3KlNG
3. Servo motor ...............amzn.to/2LbR6gG
4. Jumper wires ...............amzn.to/2Nsd7uc
5. Breadboard (optional) ...............amzn.to/2KTWPJ3
6. Led
7. Buzzer
RFID Library
drive.google.com/file/d/195Th...
Code
drive.google.com/file/d/13Oa8...
Thanks for watching - แนวปฏิบัติและการใช้ชีวิต
A pesar de que parezca tanto cablerio es realmente sencillo, lo arme en unos cuantos minutos. Excelente video!
Thank you so much Love from PH dude you did well and my project works... 🔥
Superliked!!!
I would like to thank you for your informative video. You illustrated all that therein and I could build my security access in less than an hour. I want to add a LCD display to show few information as under:
1."Authorized" message with Name (attached to Card ID) on Successful login
2."You are not authorized" message on wrong cards
3."Use your card" on Idle mode
4.Other messages related to Card
Hope to get reply from you asap.
I appreciate your time and efforts.Keep it up!
thanks yyar bhai aur bhi nayi video banatai raho
its my school project and i got 1 position thanks once again
Thank you bro it worked for me
Excellent work bro keep it up 😘
I have been try this , it's work.
Thank you very much
Thank you very much for this video. My project works now. I appreciate it. Great video.
can i get the code fo this project
@@akmrasyid977 check description
Makasih banget codingannya buat kerjain tugas
Thanks a lot brother..................its very useful
Thanks for the best video
Sir your video is osm...to good.......👨🏼🔧 I Am your Big fain....
kbe clg jabi ?
Tik nai....
How about by using wemos d1? When i touch the card to the sensor, both led will off and after that both led are on at the same time. Can you help me to fixed it. ASAP thank you
How can I make the circuit open with both cards?
its very very helpfull
Sooo good
cool it worked thanks
Excelente gracias mi hermano
Worked amazing video
Sir can I use this coding for arduino uno R3 in mobile phone in arduino Droid app please fast reply I am making this for my school submission 🙏🙏🙏
Thanks
It's working thank u
Bro, rfid is it soldered the attachment to breadboard?
Why I can’t used with battery 9v or 12v ? Please tell me how should I do ❤
LEGAL!
sağol
That servo motor probably isnt strong enough to throw a deadbolt. Any lock that could be thrown by that tiny servo could be ripped off so easily, but it's a cool theoretical project.
Room k andar too rfid tag use Nahi Kar sakte Bhar aane k liye too kese Bhar nikle ga koi
Give direct link for code and circuit diagram
Good day sir. Did you try already 2 rfid at thesame time
One by one.. at that time
@@HowToBro bro, is that rfid soldered? The attachment to breadboard with rfid
Why i cant use 9v battery?
why, when im using this two types of cards, all of them showing that the card is correct
Error: 13 INTERNAL: Library install failed: moving extracted archive to destination dir: Library MFRC522 is already installed, but with a different version: MFRC522@1.3.6 .
i found this error , anyone can help me plzz its urgent ,
No me lee la tarjeta ni el TAG, alguien sabe que hacer...
bro, why my arduino IDE cant detect the rfid cant connect When I execute it, I get the message:
Firmware Version: 0x0 = (unknown)
WARNING: Communication failure, is the MFRC522 properly connected?
Scan PICC to see UID, SAK, type, and data blocks...
I have re-checked the connections a thousand time but it's not working, the pins are connected as the example says to, and the LED D1 is on (red). Do you can help me?
it was same problem with me just prperly solder the pins of rfid rc522
Sir please provide cricuit diagram
The lock is not moving everything else works.Help Me
What’s the music? 5:27 Bty very nice video!
1 year and I'm still watching this awesome video! I need that song!!! 5:27 !!
can you make a security system with akeypad and rfid
th-cam.com/video/JVHI0iauI78/w-d-xo.html
or
th-cam.com/video/5XhTMbJGrFo/w-d-xo.html
Yes of course, you can do anything you want.
Any ways it's nice bro😘
Can u leave a link for code
can someone help me? Firmware Version: 0xF0 = (unknown)
Scan PICC to see UID, SAK, type, and data blocks... this is the message in serial monitor
Sir please give me a code link
exit status 1, error compiling for arduino/genuino uno help me how to fix this error
restart your program,check the settings(board,port,programmer)make sure lib is installed correctly and rerun the program
@@mohamedbensalah19 RFID is connected to breadboard or not
Thnx for this
Welcome
Bro Can you help me to add multiple card
DO comma then
Please solve your code
Bhai esh Mai Banda andar Jane k bad kese Bhar Aaye ga reset button too kaam hi Nahi karta code mai
Sir mujhe iska circuit diagram aur code chahie
sir please help me ;( it says ARNING: Communication failure, is the MFRC522 properly connected?
Same problem
try closing any other tabs that might be using the com port
Hi can you make it using arduino nano
Humm same pin are use for arduino nano
Of course
Firmware Version: 0x0 = (unknown)
WARNING: Communication failure, is the MFRC522 properly connected?
Scan PICC to see UID, SAK, type, and data blocks...
make sure you are using the correct pin configuration for your arduino
How to get out of the room?
SHOW.
#include
#include
#include
#define SS_PIN 10
#define RST_PIN 9
#define SERVO_PIN 8 // Define the servo pin
MFRC522 mfrc522(SS_PIN, RST_PIN); // Create MFRC522 instance.
Servo myServo; // Create servo object to control the SG90
void setup()
{
pinMode(7, OUTPUT);
pinMode(6, OUTPUT);
myServo.attach(SERVO_PIN); // Attach the servo on pin 8 to the servo object
Serial.begin(9600); // Initiate a serial communication
SPI.begin(); // Initiate SPI bus
mfrc522.PCD_Init(); // Initiate MFRC522
Serial.println("Approximate your card to the reader...");
Serial.println();
}
void loop()
{
// Look for new cards
if ( ! mfrc522.PICC_IsNewCardPresent())
{
return;
}
// Select one of the cards
if ( ! mfrc522.PICC_ReadCardSerial())
{
return;
}
//Show UID on serial monitor
Serial.print("UID tag :");
String content= "";
byte letter;
for (byte i = 0; i < mfrc522.uid.size; i++)
{
Serial.print(mfrc522.uid.uidByte[i] < 0x10 ? " 0" : " ");
Serial.print(mfrc522.uid.uidByte[i], HEX);
content.concat(String(mfrc522.uid.uidByte[i] < 0x10 ? " 0" : " "));
content.concat(String(mfrc522.uid.uidByte[i], HEX));
}
Serial.println();
Serial.print("Message : ");
content.toUpperCase();
if (content.substring(1) == "B3 05 D4 11") //change here the UID of the card/cards that you want to give access
{
Serial.println("Authorized access");
Serial.println();
digitalWrite(6, HIGH);
delay(200);
digitalWrite(6, LOW);
myServo.write(180); // Rotate the servo to 180 degrees
delay(3000); // Wait for 3 seconds
myServo.write(0); // Rotate the servo back to 0 degrees
}
else
{
Serial.println(" Access denied");
Serial.println();
digitalWrite(7, HIGH);
delay(200);
digitalWrite(7, LOW);
}
}
it is showing errors
making soup in the background
Please remove autolocking
Autolocking depends on door lock otherwise it's just normally open
Use delay time to change the locking time
Code
i wont your code
Cold??????????¿?¿??¿?!¿
I meant code???
guyssssssssssssssssssssssssssssssssssssssssssssssssssssss helppppppppppppppppppppppppppppppppppppppppppppppppppppppppppppppppppppppppp
Background music ta valo hy ni
tui e to bacha dita paris
bro can u help me now !!! im cant use code MFRC522.h
Arduino: 1.8.18 (Windows 10), Board: "Arduino Uno"
Arduino-Security-Access-Lock-RFID-MFRC522:7:10: fatal error: MFRC522.h: No such file or directory
#include
^~~~~~~~~~~
compilation terminated.
exit status 1
MFRC522.h: No such file or directory
This report would have more information with
"Show verbose output during compilation"
option enabled in File -> Preferences.
pls help me!!