SIMPLE Tech. Any picture on metal. Easy to make at home
ฝัง
- เผยแพร่เมื่อ 9 ก.พ. 2025
- Hello!!! In this video, I applied a design to metal using a simple technology. I drew the image on an ordinary stainless steel knife. The result turned out to be interesting, I thought. What do you think?
Hi all. This time I decided to make a drawing on a knife. Season 1 of the series Shogun ended not long ago. After watching it, I was inspired to create a design with Japanese motifs on metal. Thanks to patience and perseverance, using simple technology, sitting at home, I created a drawing with a small volume on the knife. Using this easy etching technique you can get a unique item with any image on the metal. For me this is an incredible result, which I am very pleased with. How do you like my work?
I used a new knife bought at the store as the basis for the design. Before I started implementing my idea, I painted over the knife to apply the design. I drew a design on the knife. Using a needle and awl, I scratched the design into the paint. Next, I started multilayer electrochemical etching of metal using a power supply. Step by step, layer by layer, my cleaver began to take on the look I needed. Once I was done etching, I used an electrolyte to darken the design and give the design some shading and visual dimension. It was a difficult but interesting project. I was pleased with the result of this work and I hope you liked it too.
Dear friends, if you decide to repeat what you saw. Don't forget to follow safety precautions. Gloves, mask, glasses, etc. And what you see is just a flight of creative imagination, and not instructions on how to do it. Thanks for understanding!
TO SUPPORT THE AUTHOR: If you have the opportunity to support me!!!
With your support you help this channel develop!
Thank you...
Donat - www.donational...
#howtodraw #engraving #drawing #metaletching #howtomake
Hello!!! In this video, I applied a design to metal using a simple technology. I drew the image on an ordinary stainless steel knife. The result turned out to be interesting, I thought. What do you think?
Привет!!! В этом видео я простой технологией нанёс рисунок на металл, изображение я нарисовал на обычном ноже из нержавеющей стали. Результат получился, как мне показалось интересный. Что думаешь?
Нож, который я делал в этом видео. Был куплен здесь - ya.cc/m/64gJhB Кухонный топор-нож с длиной лезвия 29 см. Простой и надёжный помощник для кухни.
✨ Смотрите меня в VK Видео - vk.com/video/@club226290350
Beautiful piece of art! Thank you for sharing the process. It is inspiring.
🤝🤝🤝
What a magnificent work of art. Your craftsmanship and attention to detail is astonishing. Well done my friend. Thank you for sharing your craft with us.
Какое великолепное произведение искусства. Ваше мастерство и внимание к деталям поражают. Молодец мой друг. Спасибо, что поделились с нами своим ремеслом.
Thank you very much. Best regards... 🙂🤝🤝🤝
Совершенству нет предела!
🤝
Precioso gran trabajo. Te felicito. 👏👏
🤝
Awesome work! 👏👏👏
🤝🤝🤝
Awesome work! Can you list the steps please? And chemicals
Beautiful, work of art ! Where do you get you patterns?
Hello, your videos are great and your work is brilliant! Can you please tell me what do you use on the knife so that the spray dont fall off when you start the etching? As I still learn how to etch on the knives based on your videos I can't seem to grasp every tool that you use and most of the times the spray that I use starts peeling on the smaller part during the etching process...
Try the primer. The main condition is good adhesion. The surface should not be mirror-like, maybe that's why the paint slides off... You need to try
@@MihailKupec I try with gray primer spray after that I apply white spray. But if the surface should not be mirror-like, how should I do it? With sanding paper? What grith of the paper? Or there something else? I usually clean the surface with aceton before I apply the paint
👍
🤝
I love your video, I want to try it too. but I wanted to ask whether toxic fumes are created when caustic with salt water? dear big ones from Switzerland
Thank you. Harmful gas is present, safety precautions must be observed. Mask, air exhaust, ventilated room where etching takes place.
I thank you very much
@marfabuff9117 🤝
Now make a rare woods glass case for it and hang it as the rare art that it is
👍🤝🤝🤝
Is the knife prone to rust after the process?
Stainless steel knife
Здравствуйте. Подскажите какую роль играет электролит? Матирует?
Приветствую, в данной работе электролит служит для придания оттенков рисунку
Спасибо. Ваши работы шедевральны.
@tepordna Спасибо... 🤝🤝🤝
Оно вроде бы смотришь и вроде сложного мало, но как поэтапно стирать краску чтобы это все было с тенями, это наверное нужно видение как у художника. Честно не смог уразуметь как подобный рисунок сделать.
Без практики не обойтись. 🤝
Качественно и профессионально. Использую ваши приемы, Мастер.
🤝
Здравствуйте а скажите что за кальку вы используете и где покупаете?
Привет, лавсановая бумага. Делали в советском союзе для чертежей. Где купить не знаю, мне немного подарили зная моё увлечение.
Ясно спс
@@Sergo_34 🤝
Мастер золотые руки! Ни отнять не добавить ! Снимаю шляпу как всегда! И благодарствую за направление в котором мне нужно идти к вашему уровню!
🤝🤝🤝
Здравствуйте подскажите что за краска чёрного цвета вы наносите что бы тени были
Здравствуйте, масляная краска
What paint and primer do you use or recommend?
Me interesa
primer with good adhesion
imprimación con buena adherencia
@@MihailKupec muchas gracias, maestro
@@ookamidab 🤝
Простая технология? Простая?!?!
Техника исполнения действительно простая... 🤝🤝🤝
Для данного результата - проще нету
@@MasterYogoo В любом деле навык необходим... 🤝