changing the plenum gasket on a dodge 5.2 magnum engine.

แชร์
ฝัง
  • เผยแพร่เมื่อ 23 ต.ค. 2024

ความคิดเห็น • 7

  • @Hardcorediver44
    @Hardcorediver44 ปีที่แล้ว +1

    Good job man.

  • @ozcorr909
    @ozcorr909 7 หลายเดือนก่อน

    Will this cause poor idle after warm up or right at cold start as well. My Dakota runs fine till after about 40 mins of driving will stall if rpm’s are below 2500

    • @kephartskustoms1991
      @kephartskustoms1991  6 หลายเดือนก่อน

      It will cause really bad gas mileage and will burn oil. If you stick a magnet down your intake and it's magnetic then it's the stock plate. It's a pretty common problem for these magnum 318 and 360 motors. (5.2 & 5.9)

    • @kephartskustoms1991
      @kephartskustoms1991  6 หลายเดือนก่อน

      I would try taking your idle air control off the back of the intake and seeing how dirty it is.

  • @308dad8
    @308dad8 หลายเดือนก่อน

    BudLight! No, you already knew. Go on and show us all your real accent