Cheers Gavin so to solve the 4 wheel drive issue I put the brat body on a CC-O2 chassi wheelbase fits great, about paint mistakes we've all made them, thank's for sharing keep crackin on 😎👍
hi gav, I teach aeromoddeling for the RAF Air Cadets, if the new glue doesn't work on the clear plastic, I use PVA as that doesn't stain clear plastics or melt them :)
Looks awesome!!. After all that I hope we're going to see a bit more of the Brat in action. I never knew about the Blazing Blazer. The filling of the seams on the rollbar and the T top and window gaskets really set it off. The little details count. Looks sweet.
Did the same with fitted Re-Re Blackfoot body onto a King Blackfoot had some old decals but made the main red and yellow sections from vinyl sheets. Looks much better. Top job buddy, looks awesome! Scary that First run with a newly finished hard shell! 😱
In armour modelling they paint the camo, apply the decals and clear coat. Then you do all your weathering, safe in the knowledge if you get something wrong you will not muck up your base camo scheme. Great looking Brat by the way.
Use PVA glue for gluing clear plastic parts - used by model kit builders as doesnt damage the plastic and anything that seeps out is easily removed with water.
Nice touch on the roof hatch. Lacquer takes up to a week before I go near it. Sounds like you went in too fast with the masking tape. Done a great job. I have disasters all the time. Nice to see a real honest painting experience.
Great job! May i recommend using "canopy glue" by Evergreen for the rear window? There are other products by Testers and Revell for clear parts and they claim to be more of a cement than a modified PVA glue. I have only ever used the canopy glue due to availability.
alright, story time, i first saw an RC truck in a movie when i was a little boy in the 80's it was this truck, the subaru brat that i saw in the movie "The Manhattan Project" it's about a super smart kid who builds a nuclear bomb and tries to enter it into a science fair as a way to protest, anyways while he's stealing the plutonium he uses this little truck to move the plutonium outside the building (after he used a massive Laser to cut a hole in the wall just big enough for the subaru brat to fit thru) it's a great movie, but it's also the movie that got me into RC , of course i couldnt get a brat at the time, i was poor, i'm going to get one soon and try and build exactly like the one i saw in the movie (AND i want to figure out a way to get its drivers head to move like in the movie even though that was not a stock thing on the truck. instead of the brat my foster parents got me a "9.6v Turbo Bandit" i'll never forget it, it wasnt the truck i wanted nor the truck in the movie but it was a rc truck and it did pretty good till i broke it and then i ended up getting a traxxas rustler and i drove it for a decade, all the time i was zoomin that thing around.
You can get the head to move by using a small servo and combining it on the transmitter so it follows the steering servo. Good luck with your build, it’s a fun truck for sure
Looking sharp! The Brat always looks like a simple one to do but the details are quite fiddly to get right, once it’s done though it looks great , nice work. ;)
Nice job Gav, the small details make it pop - very box art! Question about the mention of T-Cutting and then waxing it when the lacquer has fully hardened - does that mean that you've lacquered over your decals? If not, won't you risk damaging those?
before gluing the rear window mask it peel it stick it on the inside🤷♂ remask glue and paint. use cheap products and get a cheap result. i would of left it a week to dry and i live in oz
Next time your in Halfords pick up a can of the polyurethane clear coat for your next build. This stuff is super hardwearing and gives a very high gloss finish. Much better than the standard acrylic based one you used here. Just bare in mind it can take up to a week to fully harden and needs at least 2 coats.
I like the fact you show your mistakes - much better than hiding them and pretending it all went smoothly. Great video.
The white line on the sides was a good move. The roll bar could use some Hella lamps up there for show! Good job Gavin.
Great job, it looks fab. So glad you finally finished painting this one, you got there in the end!
Wow.
This is such a beautiful model.
Look Good Gav!- nice touch with the body colour between the roof panels! :)
I admire your perseverance! Looks great in the end!
Cheers Gavin so to solve the 4 wheel drive issue I put the brat body on a CC-O2 chassi wheelbase fits great, about paint mistakes we've all made them, thank's for sharing keep crackin on 😎👍
That’s CooL
hi gav, I teach aeromoddeling for the RAF Air Cadets, if the new glue doesn't work on the clear plastic, I use PVA as that doesn't stain clear plastics or melt them :)
Looks awesome!!. After all that I hope we're going to see a bit more of the Brat in action.
I never knew about the Blazing Blazer.
The filling of the seams on the rollbar and the T top and window gaskets really set it off. The little details count. Looks sweet.
I use Revell 39608 for all my builds and works well comes out nice and thin and dries pretty quick after applying it
Did the same with fitted Re-Re Blackfoot body onto a King Blackfoot had some old decals but made the main red and yellow sections from vinyl sheets. Looks much better. Top job buddy, looks awesome! Scary that First run with a newly finished hard shell! 😱
Glad to see the MP4/6 still with you Gav!
Get some Canopy or clear fix glue, to remove masking tape residue use some lens wipes or a little tamiya acrylic thinner on a cloth and gently rub.
I remember doing my mudblaster, was a lot of fiddling to get it nice and detailed.
Looking great on the brat 👍
Man that’s a beautiful Tamiya
In armour modelling they paint the camo, apply the decals and clear coat. Then you do all your weathering, safe in the knowledge if you get something wrong you will not muck up your base camo scheme. Great looking Brat by the way.
I have to say I really do love the Brat. One day I hope to pick one up! But great job on the painting...looks fantastic!
Use PVA glue for gluing clear plastic parts - used by model kit builders as doesnt damage the plastic and anything that seeps out is easily removed with water.
That’s beautiful 👌
Looks great so much work in the Brat body. Nailed it Gavin 👊🏻
Awesome paint job 🤙🏻
It looks great from here...
The driver looks good nice painting 👊🏻👍🏻
just use some pva glue gavin easy to clean off and dries up clear
Looks stunning gav we'll done 🙌
Looks excellent well done a great job. 👍👍
I had great fun with my brat ,,wish I’d kept it 🥹
Next time your gluing any windows use PVA it dries clear and you can clean it up with water
Awesome job brother. To funny I just did all this building a mud blaster. All that detail painting was brutal 🤣
Nice touch on the roof hatch. Lacquer takes up to a week before I go near it. Sounds like you went in too fast with the masking tape. Done a great job. I have disasters all the time. Nice to see a real honest painting experience.
Very good job Gavin!
The Brat was a Brat in this build 🤣 good job and a great Tamiya car 🚗
Instead of the regular head, mine has a Simpson's action figure Ned Flanders head
Great job! May i recommend using "canopy glue" by Evergreen for the rear window? There are other products by Testers and Revell for clear parts and they claim to be more of a cement than a modified PVA glue. I have only ever used the canopy glue due to availability.
alright, story time, i first saw an RC truck in a movie when i was a little boy in the 80's it was this truck, the subaru brat that i saw in the movie "The Manhattan Project" it's about a super smart kid who builds a nuclear bomb and tries to enter it into a science fair as a way to protest, anyways while he's stealing the plutonium he uses this little truck to move the plutonium outside the building (after he used a massive Laser to cut a hole in the wall just big enough for the subaru brat to fit thru) it's a great movie, but it's also the movie that got me into RC , of course i couldnt get a brat at the time, i was poor, i'm going to get one soon and try and build exactly like the one i saw in the movie (AND i want to figure out a way to get its drivers head to move like in the movie even though that was not a stock thing on the truck. instead of the brat my foster parents got me a "9.6v Turbo Bandit" i'll never forget it, it wasnt the truck i wanted nor the truck in the movie but it was a rc truck and it did pretty good till i broke it and then i ended up getting a traxxas rustler and i drove it for a decade, all the time i was zoomin that thing around.
You can get the head to move by using a small servo and combining it on the transmitter so it follows the steering servo. Good luck with your build, it’s a fun truck for sure
Looking sharp! The Brat always looks like a simple one to do but the details are quite fiddly to get right, once it’s done though it looks great , nice work. ;)
Nice rig man, been painted more times than the golden gate bridge! Driver looks sick tho.... Could be a kidney problem🤙
LOL
Oh no!!! @RCKicks I bet you invented a few new swear words🤣🤣🤣
A few lol
Glenn had hard time with Brat body, now you. Mine's staying in the box forever then...
The issues I had are my fault vs the body itself but yes this one has a load of detail so it does take a while.
I use PVA for sticking transparancies or where i can hide it a dab of epoxy
I use a "Testors" paint pen to go around the windows. It works great and is easy to use. Thoughts?
Nice job Gav, the small details make it pop - very box art! Question about the mention of T-Cutting and then waxing it when the lacquer has fully hardened - does that mean that you've lacquered over your decals? If not, won't you risk damaging those?
I'm twelve years old again 😍
Makes you appriiate lexan lol 😂😂😂
before gluing the rear window mask it peel it stick it on the inside🤷♂ remask glue and paint. use cheap products and get a cheap result. i would of left it a week to dry and i live in oz
Question - Can you just do window rubbers with a black marker pen for a nice quick simple job? Just curious......awesome video too 👍👍😊😊
You can do
we've all had nitemares with body painting 🙄
I rck Andy R I have 80's tamiya subaru brat .where I get blue body shells from.
Not that easy to find a blue body. Keep checking the facebook sale groups and eBay
Hi Gav, i still can’t stand that squeaky music, otherwise it’s a nice video man, yah gotta love the Subaru Brat body, especially in red.
Um, silly question but why not use Tamiya TS paint?
Price vs car paint volume and choice.
What is the wheelbase?
Google Tamiya Subaru Brat Tamiyabase 👍🏻
Hey mate please.
Some infos bout the Mclaren f1 car in your shelf please 🫠
I did a video on it and it’s still live on the channel
@@RCKickschannel thanks for.your answer mate. I found it.
Dunno why bit i love the Look of f1 rc cars
🇩🇰🤩🇩🇰
Next time your in Halfords pick up a can of the polyurethane clear coat for your next build. This stuff is super hardwearing and gives a very high gloss finish. Much better than the standard acrylic based one you used here. Just bare in mind it can take up to a week to fully harden and needs at least 2 coats.