For those who are having an issue, I made a video that might fix your issues: th-cam.com/video/sKGLTD0K_K8/w-d-xo.html you can also try using this method by No-ub5ju: "ok so i figured out how to fix this. At first i downloaded the aj159 apex driver from the attack shark website, which is where i had the issue of not being able to use the software wirelessly and when wired it would not let me set the polling rate to 8000hz, so to fix it, just install the aj159 pro driver from the attack shark website instead, and you'll be able to wirelessly connect and pick 8000hz polling rate"
awesome review man! I have a huge problem with the software tho... when i install it it stays minimized and it does not open... i tried their support but noone is helping me out... i thought i write here as im out of options... Thanks! I have tried so many things...
Not sure what happened man. But as you can see in my case it stays open. Also the software I am using is from their website and not some developers special access.
I am using the aj179 apex model, but the dock stopped working a few days ago. RGB is on, but the screen does not turn on and the mouse cannot be used wirelessly. I talked to the place where I bought it and they told me there was a software update, but I couldn't find any update. Do you know how I can update it?
I connected the mouse and the dock via USB at the same time, but after that it still doesn't allow me to use the 2.4 GHz connection with the drivers enabled, since the drivers only see the connected dock. As soon as I turn off the driver, the wireless connection is immediately established
@@gyverr wireless connection works fine until i enable driver. then only usb dock works. if, as you said, you connect each device separately via USB, then both are displayed. and about the dongle: my delivery does not include it. our marketplace only supplies a mouse and a dock
after starting the software it just turns into an invisible window and doesnt respond for me, any way to fix this? or maybe to change polling rate without the software atleast?
Polling rate is defaulted in 1k and 4k once you use the dock. As I mentioned you cN try to make sure both the dock and mouse is connected via USB c and make sure to download the right version of the software. As we know with these chinese brands, software tends to be faulty at times.
@ you need to adjust it via the software. Its weird that you uses 1khz prolly the version of the firmware of the mouse. As soon as you make the software work, youll be able to adjust it.
@@gyverr I saw that some people were having problems with stuttering and frankly I was a little nervous, but I ordered it anyway, I hope they have solved this situation and if you are satisfied with it, I guess there is still no problem with the mouse, I wonder if a dongle comes out of it for 1khz? Also, I bought this product from temu, I think they will not cause any trouble, it was a little lower price than the market.
@@gyverr attackshark and ajazz are co-producers, you know attackshark wrote in a video about this mouse that we fixed this problem in the comments, I bought the product from temu at a slightly lower price, I hope they don't send us defective goods :D
wait so i need to have the mouse in wired connection to use the driver? that sounds really stupid edit: ok so i figured out how to fix this. At first i downloaded the aj159 apex driver from the attack shark website, which is where i had the issue of not being able to use the software wirelessly and when wired it would not let me set the polling rate to 8000hz, so to fix it, just install the aj159 pro driver from the attack shark website instead, and you'll be able to wirelessly connect and pick 8000hz polling rate
You only need to connect both once at the same time then after that you all tge features will be unlock and you can customized it even on wireless mode.
Let me answer this since I have both of these mice. G Pro Superlight/Wireless is bigger. Coming from G Pro, this feels smaller and the noticeable part is the curved grip, unlike G pro which has the thicker body shape.
For those who are having an issue, I made a video that might fix your issues: th-cam.com/video/sKGLTD0K_K8/w-d-xo.html
you can also try using this method by No-ub5ju: "ok so i figured out how to fix this. At first i downloaded the aj159 apex driver from the attack shark website, which is where i had the issue of not being able to use the software wirelessly and when wired it would not let me set the polling rate to 8000hz, so to fix it, just install the aj159 pro driver from the attack shark website instead, and you'll be able to wirelessly connect and pick 8000hz polling rate"
The reason why it works at double-click sensitivity and 4000hz is that you do not make any settings via the application.
Thanks man
why when I have a mouse connected, it tells me that I need to connect the device
PLS HELP ME WITJ THIS
I made a video that couls somehow exain the issue.
awesome review man!
I have a huge problem with the software tho... when i install it it stays minimized and it does not open... i tried their support but noone is helping me out... i thought i write here as im out of options... Thanks! I have tried so many things...
Not sure what happened man. But as you can see in my case it stays open. Also the software I am using is from their website and not some developers special access.
me too bro
I made a video that might fix your issues check it out in the pin section
If someone finds a way to open the software because in my case it doesnt open it only shows in the taskbarpls help🙏🙏
Ill try to replicate your issue on my machine and hope to find a solution.
I am using the aj179 apex model, but the dock stopped working a few days ago. RGB is on, but the screen does not turn on and the mouse cannot be used wirelessly. I talked to the place where I bought it and they told me there was a software update, but I couldn't find any update. Do you know how I can update it?
It should be in the website. And also the software should help.
when i open the software it says my device is not connectet pls help
Still going to figure out whats the issue with this.
I made a video that might fix your issues check it out in the pin section
I remember AJ159 APEX has paw 3950 not 3395
If ai remember correct there is an inconsistency in the printing either way they use a good pixart sensor eitherway.
I have an Ajazz 159apex And my software starts but with an empty window, what should I do?
A lot of you guys are having the same issue and as of right now I cant help you on that.
I made a video that might fix your issues check it out in the pin section
too many issue on ajazz, im interested but i just dont want to get any problem😞
Understand mate to be fair Im experience none of the problem even with their keyboard
can i put gif to the screen ?
Yee you can
Why in the Ajazz aj199, I get Gaming Mouse is disconnected in the software?, help me
Not sure about the aj1999 it could be the connectivity
I made a video that might fix your issues check it out in the pin section
I connected the mouse and the dock via USB at the same time, but after that it still doesn't allow me to use the 2.4 GHz connection with the drivers enabled, since the drivers only see the connected dock. As soon as I turn off the driver, the wireless connection is immediately established
Have you checked if the dongle is also connected within the dock? Also there is a switch on the mouse you need to toggle it to 2.4
@@gyverr wireless connection works fine until i enable driver. then only usb dock works. if, as you said, you connect each device separately via USB, then both are displayed. and about the dongle: my delivery does not include it. our marketplace only supplies a mouse and a dock
@@voirade692 yeah so far thats the drawback it gliches
The software of this mouse doesn`t work for me
same, software is just not visible on the screen
Make sure the software you download corresponds to the firmware your mouse has. There are issues where in the mouse firmware is different.
I dont know what version do you have If you have aj159apex download left-sided driver which is worked very well for me.
I made a video that might fix your issues check it out in the pin section
after starting the software it just turns into an invisible window and doesnt respond for me, any way to fix this? or maybe to change polling rate without the software atleast?
Polling rate is defaulted in 1k and 4k once you use the dock. As I mentioned you cN try to make sure both the dock and mouse is connected via USB c and make sure to download the right version of the software. As we know with these chinese brands, software tends to be faulty at times.
the problem is that the software doesnt even start💀@@gyverr
@gyverr also my polling rate is at 1k even though im using the dock
@ you need to adjust it via the software. Its weird that you uses 1khz prolly the version of the firmware of the mouse. As soon as you make the software work, youll be able to adjust it.
@@snxxcky i have the same problem
how do I change the backlight of the dock to a static color?
There is a button within the dock which let you change it. But its very limited.
@@gyverr I know this, but how can I set, for example, only white color?
@@chupepov as of right now, you cant select color in the software. You need to get used to the limited colors selection.
How do i get in wireless mode pls help
Just toggle the switch in the mouse
Does the companies sensor implementation allow DPI to be changed by increments of 1 DPI? Pleae let me know! Thank You
I think only 10 or 50 sometimes 100 not sure about others
are you still happy with the mouse, do you think it's worth buying for someone who plays high level cs?
Yeah, I am still happy with it. I use it simultaneously with my kyson m600
@@gyverr I saw that some people were having problems with stuttering and frankly I was a little nervous, but I ordered it anyway, I hope they have solved this situation and if you are satisfied with it, I guess there is still no problem with the mouse, I wonder if a dongle comes out of it for 1khz? Also, I bought this product from temu, I think they will not cause any trouble, it was a little lower price than the market.
@@LPOX149. that could be cause by many factors. Including the their pc usb ports etc or could be just a faulty product which is not unheard off.
@@gyverr attackshark and ajazz are co-producers, you know attackshark wrote in a video about this mouse that we fixed this problem in the comments, I bought the product from temu at a slightly lower price, I hope they don't send us defective goods :D
wait so i need to have the mouse in wired connection to use the driver? that sounds really stupid
edit: ok so i figured out how to fix this. At first i downloaded the aj159 apex driver from the attack shark website, which is where i had the issue of not being able to use the software wirelessly and when wired it would not let me set the polling rate to 8000hz, so to fix it, just install the aj159 pro driver from the attack shark website instead, and you'll be able to wirelessly connect and pick 8000hz polling rate
You only need to connect both once at the same time then after that you all tge features will be unlock and you can customized it even on wireless mode.
@@gyverr that didnt work for me when i tried it
@@No-ub5ju ohh... it kinda worked for me though
@@gyverr maybe i got unlucky lol
bro, thank you. You solved my problem with invisible driver software. Just downloading driver from other site lmao
How is the shape compared to GPro Wireless?
For small hands like me, its quite perfect to be honest. I thibk its similar since most mice are like this nowadays
Let me answer this since I have both of these mice. G Pro Superlight/Wireless is bigger.
Coming from G Pro, this feels smaller and the noticeable part is the curved grip, unlike G pro which has the thicker body shape.
Can I use 3200 dpi on it?
Default yes, you can cycle by the button
Brother i think buy mouse is good or no
Its good!