My dad always told me after you put new bolts on a whole new muffler system all the clamp boats stay heat up loosen up so you gotta get back on there later on and tighten them up some more couple hours later day two days later
I have a 2010 chevy Aveo, I'm having problems with the catylac converter, engine control module, and knock sensor. What's my first step I should take in getting my car back on the road?
Do you have a video on how you stopped the oil leak (or suggestions on what I'm looking for to fix it)? I have the same issue with my aveo and you make things easy to understand!
Ho yeah 👍👍 I'm glad to see that you are using a AUTEL scanner ...they are the best scanner you can get ...I also have a AUTEL SCANNER and now all my friends want ME.. to diagnose there car lol but I understand...they all have a snap on scanner...there no good for nothing lol.
What was the car behavior? I have a 2008 stuck at reduced power mode, also fuel trim at -30 everything checks fine but the converter is empty and wonder if that's the issue.
Hey. I have a 2009 Pontiac G3 Wave and it's completely different than this car is in the video. My cat is welded directly to the exhaust manifold. But thanks for the info.
They were both the same age, and from RockAuto you get 2 for the price of 1 basically. Plus my Mother-in-Law didn't want anything left to chance lol. Her car, her money, I just spin the wrenches!!
Yeah, I said I once I think on here on route 40 and Baltimore, Maryland muffler shop put a supposed to put a Cadillac converter on my Chevrolet 2011 $1400. He put a straight pipe put a Cadillac converter on it for five years I did not know it didn’t have one. I didn’t have one freakingbroke down and Cadillac murder new manifold the whole pipe Gary put it on soon. It rain stop rain rain rain.
Yeah, I might have to put in the shop to put a new Cadillac converter 14 fucking hundred dollar I pay for him to put a new Cadillac converter. I didn’t look under shadow because he put a straight pipe instead of a Cadillac and goes to show you all your shops.
My dad always told me after you put new bolts on a whole new muffler system all the clamp boats stay heat up loosen up so you gotta get back on there later on and tighten them up some more couple hours later day two days later
I have a 2010 chevy Aveo, I'm having problems with the catylac converter, engine control module, and knock sensor. What's my first step I should take in getting my car back on the road?
Do you have a video on how you stopped the oil leak (or suggestions on what I'm looking for to fix it)? I have the same issue with my aveo and you make things easy to understand!
Where is your oil leak coming from? It depends on where the leaks are as to how hard they are to fix. Thank you for the feedback!!
So what does that mean the ticking sound
Ho yeah 👍👍 I'm glad to see that you are using a AUTEL scanner ...they are the best scanner you can get ...I also have a AUTEL SCANNER and now all my friends want ME.. to diagnose there car lol but I understand...they all have a snap on scanner...there no good for nothing lol.
What was the car behavior? I have a 2008 stuck at reduced power mode, also fuel trim at -30 everything checks fine but the converter is empty and wonder if that's the issue.
Thank you. Not throwing any codes now?
Nope! Fit as a fiddle! It's been a surprisingly low maintenance car for the abuse my mother in law puts it through lol.
Your awesome my man! Thanks
You're welcome! Thanks for the support!!
Hey. I have a 2009 Pontiac G3 Wave and it's completely different than this car is in the video. My cat is welded directly to the exhaust manifold. But thanks for the info.
Why did you replace the rear catalytic converter too? It’s not monitored by any oxygen sensors.
They were both the same age, and from RockAuto you get 2 for the price of 1 basically. Plus my Mother-in-Law didn't want anything left to chance lol. Her car, her money, I just spin the wrenches!!
@@Paulie_KITT extra measure, I appreciate the feedback!
I’m getting ready to replace the converters on my daughter’s 2011 Aveo. What converters did you buy from RockAuto? Thanks
Sorry for the delay! We bought the FVP brand from RockAuto, and so far they are holding up very well! Good luck!
F that I am going to run a straight pipe on my Aveo not wasting any money Cadillac converters
I just had that done by a mechanic and I'm hearing a ticking sound
They are so easy to put on that’s why I like little cars or seller if they are so easy to work on got plenty of worm
Nice. F that I am going to run straight pipe on my Aveo not wasting money on Cadillac converters
Yeah, I said I once I think on here on route 40 and Baltimore, Maryland muffler shop put a supposed to put a Cadillac converter on my Chevrolet 2011 $1400. He put a straight pipe put a Cadillac converter on it for five years I did not know it didn’t have one. I didn’t have one freakingbroke down and Cadillac murder new manifold the whole pipe Gary put it on soon. It rain stop rain rain rain.
Yeah, I might have to put in the shop to put a new Cadillac converter 14 fucking hundred dollar I pay for him to put a new Cadillac converter. I didn’t look under shadow because he put a straight pipe instead of a Cadillac and goes to show you all your shops.
Brock auto parts