Hello everyone! I hope you will like this build video. And i will be really happy if you subscribe to my small channel. I have more build videos to come!
KNIPEX Tools - Precision Mini Wire Stripper, 26-36 AWG (1280040SB) I do micro soldering. This is crazy expensive but worth it. Think you might like it.
@SkiptaFPV the knipex ones gets so precise on the cut that you dont need to yank and pull on the wires at all to strip off the insulation. As you know, when dealing with these short runs of wires, getting a grip on them to yank them through a dull cutter can cause damage to the other end which is often a solder joint. And you dont need to risk the finger cuts from rolling it on a razor's edge. :) But yea, the price deterred me for a year. Lol
Two quick questions. 1) Is there a place to get some camera mounts like this for DJI o3? 2) Would you stack the DJI o3 module over the AIO or put it front / back? I'm trying to assemble this 2.5" QAV and nothing is going right. The top of the frame is missing the two slots for the camera uprights to fit into! Crazy but i think it's a defect and I'll return the frame for a 2" possibly.
Hey! 1)You can download 3d print for o3 mount here: www.thingiverse.com/thing:5865976 2) Better to put o3 module onto back of the drone. Missing slots on carbon that's weird for sure! By the way I'm going to post another video with this frame and o3 unit.
This KV is great for 6s power. I have another 2,5 inch quad with 6s power system. I decided to stick with existing batteries and same motors because it easy. There is no 4s drones in my fleet anymore
@@SkiptaFPVWOW! Do u think if i got t-motor f1404 (4600kv) with a very similar rig u have and maybe a 4s 550mah or 720mah i will get a similar flight time like u?
Hello everyone! I hope you will like this build video. And i will be really happy if you subscribe to my small channel. I have more build videos to come!
Puedes construir un dron de 2.5 pulgadas para estilo libre, igual sistema de walksnail y en el menor precio posible también que sea para 3s lipo???
Bonito frame. En cuanto al montaje muy limpio y todo muy recogido... Eres un crack!!
Какая ювелирная работа, сколько терпения! 👍
Trabajo muy limpio.
Excelente
KNIPEX Tools - Precision Mini Wire Stripper, 26-36 AWG (1280040SB)
I do micro soldering. This is crazy expensive but worth it. Think you might like it.
Wow, that’s really expensive and professional. Thank you! I will think about it.
@SkiptaFPV the knipex ones gets so precise on the cut that you dont need to yank and pull on the wires at all to strip off the insulation. As you know, when dealing with these short runs of wires, getting a grip on them to yank them through a dull cutter can cause damage to the other end which is often a solder joint. And you dont need to risk the finger cuts from rolling it on a razor's edge. :)
But yea, the price deterred me for a year. Lol
how much does it count to build a drone like that ?
Hi, i saw that there are 16x small knurled spacers in the box, for what are they they used to?
To be honest i'm don't know. Maybe it can be used as spacers to make frame higher
Two quick questions. 1) Is there a place to get some camera mounts like this for DJI o3? 2) Would you stack the DJI o3 module over the AIO or put it front / back? I'm trying to assemble this 2.5" QAV and nothing is going right. The top of the frame is missing the two slots for the camera uprights to fit into! Crazy but i think it's a defect and I'll return the frame for a 2" possibly.
Hey! 1)You can download 3d print for o3 mount here: www.thingiverse.com/thing:5865976
2) Better to put o3 module onto back of the drone.
Missing slots on carbon that's weird for sure!
By the way I'm going to post another video with this frame and o3 unit.
how did you decide on the KV motor selection?
This KV is great for 6s power. I have another 2,5 inch quad with 6s power system. I decided to stick with existing batteries and same motors because it easy. There is no 4s drones in my fleet anymore
Lets goo,another build,quick question,do you study like, engineering stuff or you learn all this by yourself.
All i know is from the internet (TH-cam mostly) and my friends 😊
@@SkiptaFPV Thank you for the reply,i love your drone build videos,so calm and relaxing,pls make another one when its possible 👀
Wow~ great!!!
Nice ASMR video!
Does it fly nicely?
Yes it flies nicely. I will put some footage to my channel later
what's ur flight time with it
I get around 4,5 - 5,5 minutes
@@SkiptaFPVWOW!
Do u think if i got t-motor f1404 (4600kv) with a very similar rig u have and maybe a 4s 550mah or 720mah i will get a similar flight time like u?
@@dexter4562 I think yes!
@@SkiptaFPV it's been around 2weeks my guy! im very exited to see this rig flying, will you publish any "dvr" footage about it soon?
Hey me again can you do the same here and tell me everything I need this and the other build it's about the cleanest I've ever seen
Main component listed in the video description. But you need to find them by yourself. There is a lot of shops all over the world
Please send me one u built looks good
auguem fala portugues
Hie bro plz contact number dedo