Hey guys! I’m in California having a BLAST! The videos should be coming out next week. Also, there’s a little under a month left to enter in the #SaveTheManuals giveaway! Make sure you guys go to www.itsjusta6.com/shop and get entered in now!
@@Berannn_ not much power loss when compressor is off, even tho it is on it only losses a tiny bit. Better to survive hot days than suffocate in a hot car and run 0.005 sec faster...
Hey man just some friendly advice you’ll burn the electric motor out of that hoist in less than a month if your buddy doesn’t wait 2 seconds between cycles , when he clicks it 50 times within 30 seconds it’s going past it’s appropriate duty cycle
I know I’m probably about to sound dumb asf but since the car is no long a Roush/whatever package it is you should do your own logos for the car. On the grill replace the tiny badge with a ‘6’ and on the back trunk replace the GT/mustang with a ‘justa6’ or something like that. It would really personalize the car and make it stand it out. Just an idea, love the videos mans!
@Taps , no disrespect but your comment is dumb asf.. ricey is something that makes the car seem faster but doesn’t actually make it gain power, in addition to how it may look. This dude is talking about him making his car more of a brand/logo putting his ‘ own things ‘ into his car cannot be compared to it “ sounding ricey “.
Gavin, get a rolling tool cart so you can brig tools to the lift and also dont have to put parts or tools on ground. It will help with efficiency and organization.
Always love the content! Literally have to stop what I’m doing just to come watch your uploads, really looking forward to seeing this car go back together! Sending love from Tennessee!
Find a foxbody for the drivetrain and keep having fun with it. The S550 is going to be insane with the new power plant so it's time for a real cage to be put in it and put it on a massive diet for full race car mode and get ready for 8s. Really looking forward to this build and yes I have pulled a motor from a S550 and took it out through the top but since your building it you did it the right way
Great reliability, great power as long as u stay within the 650-700 range I would say is safe and if it happens to be a 4x4 the launches are amazing lol
U literally have all the tools u need to take a coyote out ! I been taking mines in and out so many times in jacks that I’ll probably take an hour or 2 lol and it’s fun with that lift I’ll take no time ... keep on doing it it just gets easier every time !! And btw keep ur ac u gonna regret when u out in tx2k or just cruising ! If u don’t let me know I’ll buy from u I need one ASAP
Although you wanted to keep it a street car like you said,”it’s gone fast but now it’s time to go real fast.” It’s time for Saten the Mustang act like a bat outta hell running down the track running 7 second passes.
Carlton Bolivar car insurance as they would fix him, if he had life insurance he would still be fucked and his relatives would get the money and they may not restore him back to life
TFOXFAM TFOXRULES anti lag lol and no lag if you’re racing 1320 since you build the boost when staging. Even roll racing you just build boost with brake boosting
GO HARD OR GO HOME!!! your doing the right thing making the Mustang into a drag car !! There ain't nothin better than a wild Pony galloping off into the distance with everything else chasing it. Get the weight out of it and go baby go !!! Manual is good but powerglide kicks butt! Love the content!! Peace from Australia!!
@@noahvs1999 because you can just toss the bolt in there instead of fiddling with a plastic bag that could easily rip and heard to open when your hands are covered in oil. And the plastic cup you could label with a sharpie as well. I'm talking from experience
When using the lift dont bump thr button like that. Give it atleast two seconds before you hit the button again. It'll cause that pump to wear out quickly
Looking good, can't wait to see the new engine go in. I can't help but laugh a little at the typo in the last two videos "Proffesional driver. Do not attempt."
Just a heads-up I was told at my last shop that you can burn out the hydraulics or something if you bump the lift button. Not sure how true it is, but figured better safe than out 3-5k
Hey guys! I’m in California having a BLAST! The videos should be coming out next week.
Also, there’s a little under a month left to enter in the #SaveTheManuals giveaway! Make sure you guys go to www.itsjusta6.com/shop and get entered in now!
itsjusta6 🔥🔥
Where in Cali ? If you’re in the Santa Monica side come check out our shop. Gran turismo of Los Angeles. 1884 s Sepulveda
Look us up on Instagram
itsjusta6 how much for the motor
I knew you would get on Ellen soon. Congratulations.
Next video : “ PUTTING THE OLD COYOTE IN OUR MIATA! “
He gone rebuild it first imo
@@pablomartinez4716 All facts brotha
fatboidetailing on KARR s channel he put a hellcat engine in a Miata. Actually it’s a Jeep trackhawk crate.
SAVAGE TUNER but this one would make more power and rev higher
No “Next Video: Rebuilding my a coyote engine (Part 1-Finish) Putting Rebuilt Coyote engine in Miata”
Shouldve done it the 18 second way with poes truck😂
More like the 18 minute way.
@@dylanshea52 true true
I think they want to save th car not sure
Yeah but then that would screw up the whole front of the car and maybe hurt it more than you think
SBZ you’re a fucking idiot
I'd keep the A/C for those hot track days. Waiting in line without airflow sucks.
Marcus Hawley true
A/c = Less power More weight
bobwatters tru tru
@@Berannn_ not much power loss when compressor is off, even tho it is on it only losses a tiny bit. Better to survive hot days than suffocate in a hot car and run 0.005 sec faster...
Using air conditioning waiting in line to make a pass can be dangerous if the water from your evaporator drain gets on the track
Hey man just some friendly advice you’ll burn the electric motor out of that hoist in less than a month if your buddy doesn’t wait 2 seconds between cycles , when he clicks it 50 times within 30 seconds it’s going past it’s appropriate duty cycle
james harden atleast some people know this stuff.
I was going to comment the exact same thing lol
Keep the AC (you’ll regret skipping it in the long run) and keep it street-able... way more content possibilities.
Greg F A/C is for the weak and if its got headlight an tail lights and blinkers its a street car
Shit Leroy is still streetable but yeah ac fosho!
ThatPersonYouKnow 100lb is a .1 in the quarter mile and if u can sit in a car with no A/C for a short period of time ur a bitch🤷🏻♂️ grow a pair
@@justanothermortythis comment aged well…
I know I’m probably about to sound dumb asf but since the car is no long a Roush/whatever package it is you should do your own logos for the car. On the grill replace the tiny badge with a ‘6’ and on the back trunk replace the GT/mustang with a ‘justa6’ or something like that. It would really personalize the car and make it stand it out. Just an idea, love the videos mans!
sounds ricey
@Taps , no disrespect but your comment is dumb asf.. ricey is something that makes the car seem faster but doesn’t actually make it gain power, in addition to how it may look. This dude is talking about him making his car more of a brand/logo putting his ‘ own things ‘ into his car cannot be compared to it “ sounding ricey “.
I really like the idea of demonologies soul snatcher taillights
You guys need to kiss already
Isn't the little emblem in the front a coyote logo? That's not from roush
Gavin, get a rolling tool cart so you can brig tools to the lift and also dont have to put parts or tools on ground. It will help with efficiency and organization.
I did this an its SOOOO much easier.. Harbor Freight FTW lol
Good job bro taking engines apart sucks especially when it’s not something you do everyday only engine I’ve pulled was a 5.7 hemi through the top.
Aww yeah! New upload!, Much love to the 6 crew! Also love the video content and quality!
PontyMython ‘tis but a scratch
Always gotta click off another TH-camr to come watch Gavin 😈
Sparkling Water same here
Same
Lol i clicked off of hulu for it 😂
Same
💯
Having the lift makes a night and day difference
Always love the content! Literally have to stop what I’m doing just to come watch your uploads, really looking forward to seeing this car go back together! Sending love from Tennessee!
Tristan Horner Tennessee here to broski
I’m pretty sure that hellcat swapped Miata is waiting for a vmp coyote swapped Miata 👀
Last video he said he was gonna pull it next video I thought he was joking 😩😭
usually when he says "the next video" he means the video after the next
It’s for a better cause
More eagles under the hood
Love your work Gavin keep it up I check almost every moment to see if you have uploaded
Lemme ask the important questions: Who'se kid is that and why is he touching Satan so freely?
Yessssssss, the video I've been waiting all day for😂😂😂😂
all motherfucking year
Find a foxbody for the drivetrain and keep having fun with it. The S550 is going to be insane with the new power plant so it's time for a real cage to be put in it and put it on a massive diet for full race car mode and get ready for 8s. Really looking forward to this build and yes I have pulled a motor from a S550 and took it out through the top but since your building it you did it the right way
That's what I've been saying, I think he should drop the old set up in a foxbody and make it into a sleeper, I think that would be dope to see
Been watching your videos for a while now I know exactly what’s in that tarp and the end result is about to be NNAASSTTYYYY!! Good luck man stay safe!
hey Gavin love your vids sry about the car wish you luck and safety in your next race keep it up bro
would you recommend a supercharger kit for a 5.0 f150? Wanting more power but want reliability?
Yes.
Great reliability, great power as long as u stay within the 650-700 range I would say is safe and if it happens to be a 4x4 the launches are amazing lol
Yes a whipple...Check out BoostedF150 on youtube.
U literally have all the tools u need to take a coyote out ! I been taking mines in and out so many times in jacks that I’ll probably take an hour or 2 lol and it’s fun with that lift I’ll take no time ... keep on doing it it just gets easier every time !! And btw keep ur ac u gonna regret when u out in tx2k or just cruising ! If u don’t let me know I’ll buy from u I need one ASAP
2:57 Lol I was wondering how you’re keeping track of where things go. Great idea!!
I’ve dropped 3 and pulled 1. Dropping them is definitely the easiest way.
Man, I'm loving this upload schedule. It's actually really good!
Although you wanted to keep it a street car like you said,”it’s gone fast but now it’s time to go real fast.” It’s time for Saten the Mustang act like a bat outta hell running down the track running 7 second passes.
I almost watched allll your videos and I keep rewatching them until you post a new one that’s my life atm
vid came out right when my food came out the microwave im so happy
MysticFH same but I dropped my kd on the floor hahahahah
Watch ya eaten
Glad im not the only one 😂
Love when that happens
what you need for driveshaft bolts is either a long extension on a ratchet end, or a hammer and impact driver
With Harry's new cut he looks pissed off all the time.
Vincenzo ursomanno ➡️ also he looks like Aaron Hernandez’s with his new haircut 💇♂️
My shirt came in today! Thanks Gavin!!!
I want to recreate your mustang in Forza. But, the only 2016 mustang is the Gt350, and it can’t make 1000 hp on a supercharger. Lol still fast.
i did it on nfs but no shelby bumber
Treflash Gaming I tried doing the same thing
in forza motorsport 7 i ran a 9.6 in my version of his mustang
I did it on crew 2
Nice someone removed my comment
I'm sitting here waiting for the videos on the mustang and the video from Trace. & Mello yall got me anxious on both ends🤣🤣💯💯💯
That's not the first time I've seen the engine hung up on the ground wire.
LOL Aren't they all ?
Every time 😁
Man ever since u got that race engine, what seems like decades ago I've been waiting for it to go in. I can't believe that motor held up so long.
Longer vids pls 😢 rather have “boring” clips then no clips. Anyone agree?
Don't cry buddy. It'll be ok❤
Christopher Yost 😭😭😂
WOW good job on the upload speed yesterday when I saw the video I didnt think we would see this video for a few days
Did nobody notice that the beep in the outtro the costom stering wheels is in beep
Finally you are going full race car is about time I really want to see this car fly
I got mad that our power went out and we lost WIFI while watching itsjusta6.
That's why I PAY for that data. My Wi-Fi randomly gets slow af and I become an angry elf
Forrest. U from the east cost
Northern Virginia
As soon as I saw you said on Instagram that your pulling the motor ive been going back and forth on and off youtube to check if you posted the vid yet
2 bolts here, 2 bolts here, 2 bolts here and 4 billion electrical connections and that’s it. Super simple.
You better be doing this right Gavin. Good luck!
Does lightning McQueen have car insurance or life insurance🤔
Carlton Bolivar if I had to guess both
Carlton Bolivar car insurance as they would fix him, if he had life insurance he would still be fucked and his relatives would get the money and they may not restore him back to life
C6 ZR1 For The Win
Now you can finally slap some twin turbos on that thing & make some real power!!! 😅😅😅 #wewantturbos
Nah superchargers for life instant boost no lag
TFOXFAM TFOXRULES anti lag lol and no lag if you’re racing 1320 since you build the boost when staging. Even roll racing you just build boost with brake boosting
are you going to stick with the mantic clutch? I've heard alot of good things about the McLeod clutches.
Will you change the block? if yes, will you put twin turbo on the car instead of a blower?
Jess Laf he is swapping a built block and he is changing to the VMP gen 3r
Jess Laf wouldn’t be the same not everything has to be turboed
This build is getting more awesome every video
That’s how we did my cobalt motor is front he bottom on the subframe
KBrothers Sports because no one pulls front wheel drive motors from the top
Just finished doing the same thing with a maxima
@@peepeepoopoo69420 what did you put in it ?
Mike Hunt huh well it is impossible to pull I front wheel drive from the rob cause of the transmission
DirtBikeRider 100 what’s funny is it’s not impossible
This video is another history marker in itsjusta6
Can we all agree this motor needs to go in a crown Vic?
Super dope video!!! I always enjoy coming to your channel to see new content! Keep up the great work dude can’t wait to see the new “street car” lol
LOL If that showed up on my door step I would load it in the back of my Chevy truck and take it to the auction.
I would shoehorn it into my 2001 hyundai santa fe.
You better not have been serious about not putting a manual back in the car.
GO HARD OR GO HOME!!!
your doing the right thing making the Mustang into a drag car !!
There ain't nothin better than a wild Pony galloping off into the distance with everything else chasing it.
Get the weight out of it and go baby go !!!
Manual is good but powerglide kicks butt!
Love the content!!
Peace from Australia!!
Next Video: Coyote Swapping The GSXR 🤠
Imagine😂😂😂
I HAVE BEEN WAITING FOR THIS VID FOR SO LONG
Well some people’s street cars A/C don’t work so could it still be a street car then. 😂
sad that the mustang is down but the motor looks sexy getting a good look at it😂💯
Next video: putting a coyote in a gxsr!
You should get a sotf switch and a ez lynk for Allison. Be making some reel power 💪🏻
So, in real time the mustang has its new engine in, and meep has claimed yet another mustang
Christopher Yost negative. In real time, I’m in California on vacation 😂
@@itsjusta6official enjoy it!👌👌
One of my favorite channels
2 views 16 likes 100 comments
Good job TH-cam 👍🏻
You should live stream you putting the build motor in and switching everything
Yessssss
next time use plastic cups for bolt, way easier and more convenient than a plastic bag
But easier to tip over and lose
there storing the bolts and labeling it how is a cup more easy
@@noahvs1999 because you can just toss the bolt in there instead of fiddling with a plastic bag that could easily rip and heard to open when your hands are covered in oil. And the plastic cup you could label with a sharpie as well. I'm talking from experience
@@Serrrgg not really. The weight of the bolts hold the cup pretty sturdy
done stuff like that all the time love it everytime
What's the cubic inches of a funny car? You should get one of those
Funny cars run Hemi's
johnny Portwood 500 cubic inches
All ive gotta say is u best still drive the stang on the road when your done with it
Who is that kid lol just wondering been watching along Time he hasn’t been here
Melissa Myers I think Harry’s brother if I had to guess or somehow Kin
I think its Harry's son
Harry’s brother
I can’t believe Gavin is actually doing some work. If it weren’t for Harry that shop would fall apart. He seems like the go to guy
is that guy in the video harry's brother or something
I think it is
Yes he is
11:18 jaja puro puertorriqueño
And by the way I'm Puerto Rican
Keep doing high quality content the best of the best for you guys.
No never stop saying it’s a street car... :) 😂
So you have the fastest street car
Im happy this video was with a lot more of a positive vibe towards the coyote. She’s been great to you. Push for 1300 and make her great again
S Johnson i think 1500-1600 and keep the 6 speed
The more, the merrier :)
Clicking This Vid In Less Then 3 Seconds.
Zorbii be pumping out the vids
Excuse me, but this was pulling an engine out in less than 20 minutes. Not less than 3 hours 🙄
Still less than 3 hours
@@zacharyspencer1694 truuuueeeee...
that little snap on gun that i have is perfect for working on motorcycles
Finally 😭🤟🏽 I’m ready for that stang to fly
3 HOURS, daaaaamnnn
When using the lift dont bump thr button like that. Give it atleast two seconds before you hit the button again. It'll cause that pump to wear out quickly
Only bangers
I’m sooo hype for this build let’s gooo 8s
Can we think about upgrading the go pro bubble lenses on the go pro? I shoot on my 7 without bubble and it looks good.
Ay Puñeta.... And that's how you know he's Boricua. Me 2 Love the channel.
GOOD JOB FELLAS !!!
Looking good, can't wait to see the new engine go in. I can't help but laugh a little at the typo in the last two videos "Proffesional driver. Do not attempt."
Nice that you upload more often :)
Thank you I’ve been sick all day and was waiting for this video 😂
Just got off a plane now im gonna watch this before my next flight yesss
Double upload thank the lord
NOTIFICATION SQUAD GAVIN LOVE YA!
When harry starting yelling in Spanish I lost it cause I can relate so bad 😂😂😂😂
Just a heads-up I was told at my last shop that you can burn out the hydraulics or something if you bump the lift button. Not sure how true it is, but figured better safe than out 3-5k
Just a tip cover the front end with shrink wrap.... Rip paint
I love it when Harry swears😂😂 I be dying the whole timeee
Been waiting for this video for a long time... Can't wait for the built motor to be dropped in the mustang. 😁😁