Resin Ocean Tutorial 3D ocean in resin with glow effects - take your project to the next level
ฝัง
- เผยแพร่เมื่อ 7 ส.ค. 2024
- Ocean Coaster - there are so many blue combinations you can use, the ocean can be darkened like a stormy night, or you can lighten the blues to give off the sunny day look, thanks for watching!
If you found this video informative and would like to buy me a coffee or leave a tip (cheers!): www.paypal.me/resinasyouwish
00:00 Resin Ocean Coaster
1:07 Step 2 - first wave
4:32 - Step 3 Second wave
5:14 - Step 4 add the ocean
14:25 - Step 5 3D waves
16:04 Step 6 last layer (Color , clear and final waves)
20:18 step 7 sand and prep for clear coat
21:02 FINISHED!
22:20 See it glow!
I am an Amazon associate, I receive commissions from the qualifying links to amazon listed below:
Colors:
Metallic powder - I use this one because the gold pools and doesn’t disburse into the resin
Mehron Makeup Power
Gold: amzn.to/31XBsQ3
and
Bling it gold: amzn.to/32DoEyp
Ultramarine blue by liquitex acrylic paint: amzn.to/3e7GtId
Phthalo green by artist’s loft acrylic paint: amzn.to/38uI61q
Cobalt turquoise Hue by decoArt acrylic paint: amzn.to/3f5HJg4
Combined to make this soft hue of teal:
Phosphorescent green - glow in the dark by Golden acrylics: amzn.to/3e1j4aY
(One drop of) Dr. Ph Martin’s TEAL ink: amzn.to/31Ro3ZL
(A pinch of) interference green pearl ex powder pigment: amzn.to/31HvToF
WHITE (mixture of Castin’ craft with a couple drops of the alcohol ink):
Castin Craft white: amzn.to/3e0MYfB
Alcohol ink white: amzn.to/38ttAGZ
Coaster molds: 5 inch: amzn.to/31S96X0
Typical Tools I use:
Hair Dryer (the brush tip is removable): amzn.to/3bp2kfh
Sizzix Accessory - Die pick: amzn.to/38SSgL8
Dental pic: amzn.to/2Gcj4tG
Dot tools: amzn.to/3s5JFMq
Paint spatula: amzn.to/3i88xNA Dental pic: amzn.to/2Gcj4tG
Torch: amzn.to/39suJiH
Heat Guns:
1. AmTake: www.amazon.com/Variable-Tempe...
2. Heat gun - I have a red version of this one: amzn.to/2WXGrwq
3. Heat gun - Green version: amzn.to/3woY6NK
Heat gun tips and nozzles:
Here is a link for just heat gun tips if you already have the gun but don't have the end pieces: amzn.to/2GPn3wC
Dremel 3000: amzn.to/3o4POra
Dremel bits Stone Bit: amzn.to/2NSyAvk
120 Sand Paper Grit Dremel bit: amzn.to/2BHns1Z
Tape: this tape is called “drape tape” amzn.to/2BxlFfY
Pink Respiratory Mask: amzn.to/3CLL7bP
Safety Glasses: amzn.to/3ERLamW
Safety Recommended: Carefully read your product labels and warnings, make healthy choices based on your research and craft safely!
Signature pens:
Gelly Roll Pens - Stardust set
Gelly Roll Pen silver: amzn.to/3i52yJV
Gelly Roll Multi pack: amzn.to/2F0M73a
My Shop:
www.etsy.com/shop/ResinAsYouW...
Pinterest: To see more of my designs and videos (Check it out)
pin.it/7qlAsgu
Resin I used: MiraKleer Table Top: amzn.to/2Zl9ziR
![[ไฮไลต์] รอบชิงชนะเลิศ "เทนนิส พาณิภัค" ไทย vs จีน Guo Qing เทควันโดหญิง 49kg | โอลิมปิก 2024](http://i.ytimg.com/vi/xgvTIdE8j3U/mqdefault.jpg)
1:07 Step 2 - first wave
4:32 - Step 3 Second wave
5:14 - Step 4 add the ocean
14:25 - Step 5 3D waves
16:04 Step 6 last layer (Color , clear and final waves)
20:18 step 7 sand and prep for clear coat
21:02 FINISHED!
22:20 See it glow!
Egads, I'm speechless! Enjoyed this so very much, especially the little surprise at the end! I agree with Becky. The Northern lights would be an excellent one to do, if you're feeling like it.
i know I am pretty randomly asking but do anybody know a good site to watch newly released movies online ?
@Marcellus Jermaine lately I have been using FlixZone. You can find it on google :)
Yesss northern lights ✨ 💛
Amazing work. What grit sandpaper did you use, thanks.
These are breathtaking. I searched for ocean coasters because I want to make some for a Mother’s Day gift. I love your attention to detail. You truly put your heart into your art. AND it glows!
That has got to be the best beach resin tutorial I have seen and I have watched tonnes. Thank you very much for sharing, in such detail and not sped up. You are so good at this and your art shows.
Your work is fantastic, it looks just like the ocean with waves! I really admire your work, thanks for sharing your talent.
Absolutely gorgeous, thank you so much for sharing! So worth the layering, I love it 💜
The depth is amazing. Love this looks like a moonlit storm
Stunning
Just stunning!
Just amazing, stunning, beautiful! Makes me want to jump right in🧜🏽♀️
That’s beautiful. Thanks for sharing your technique.
Gorgeous!❤️❤️❤️
I am in such awe of your work. Absolute perfection- everything you do! Thank you for sharing your wild and wonderful talents with us.
Gorgeous. Lacing is particularly effective.
I love this. It is gorgeous. 🌷
FANTASTIC! 💗💗💗💗💗💗💗
OMG!!! I felt this as you made it ... One of the best tutorials I have yet to come across...
Thanks for all the detail in this video..
so beautiful, love it
This was awesome I loved the way it turned out.
love how you worked with the reaction to create the "explosion" of the waves- very thoughtful
What type of resin do u use?
Beautiful, beautiful, congratulations 👏🏻👏🏻👏🏻
absolutely gorgeous!!!! so much effort, but the result is astonishing! clock would be a great idea to do this way
Fabulous , you are patient and I wish I was too lol ...GOURGEOUS coasters!!!!!!!
Just beautiful!! Thanks!
Beautiful
Amazing!
beautiful
That is the best ocean resin coasters I have ever seen!!!
Beautiful ❤️
WoW ! WoW !! WoW !!! Stupendous work ♥️
I have lots of practice to do to reach your level but keeping your video for reference. Thanks so much. Its GORGEOUS 😍😍😍
So stunning! I would love to do this but I'm afraid i dont have the patience 😂
amazing love it tfs
Love this! I stumbled across your page today and I've been binge watching your videos. You're very talented. TFS your skills with us.
Best wave tutorial i saw!!!
Really nice , looks real
Thank You this was an Amazing lesson on making Beautiful waves!!! Wish I could show you my first attempt before watching you and the one I just did!!! Amazing ❤️🥰❤️
sooooo goood!!!!!!!!
So, so pretty.
Magnifique
That’s just fantastic! Too much work for just a coaster, though, I’d have to be doing a tray or a wood round!
I do the coasters for the TH-cam videos, You can zoom in and focus easier. I have quite a few 18 inch trays in my shop. I love the work that goes into the resin :-)
There are much quicker ways to doing this. The perosn just did multiple layers to make it look more realistic.
Perfect coaster for fruity drinks. 🍹
Damn girl. That is the best ocean effect I think I have seen. Subscribed!
Now I have a new rabbit hole to go in...
I know what you mean! it's fun to find a new perspective on resin!
@@ResinAsYouWish it so is!
I am enjoying my artistic side more than ever before.
I just did my first ever Z Gallery inspired painting I have wanted to do my entire life and never felt capable, and a lady on TH-cam made me think I could do it. I am in awe of myself lol.
The resin and how it goes into so many other mediums is amazing.
I am excited to try what you showed, I need to watch again to take notes, lol, the phosphorescent green is out of stock as are any good whites that i have been searching for.
Lol. I spoke with one dealer who has a good one and hope to order a new white next week.
Your ways are different tho, and I will try your techniques first! I am sooo excited. Thanks for sharing and replying!
Gorgeous work wow love it!! I noticed this was posted 2 years ago will you be continuing to create more?
The glowing part at the end would be great for a northern lights coaster.... hint hint
time to make this
Turned out really beautiful! 🌟😊🌟Dont understand why there are so many layers of resin😊
Gina Feddersen the layers do two things for me 1. Gives me more control of the design 2. The more layers I do the better the 3D effect and I’m totally obsessed with the 3D effect 😍👍
YES! OMG, I know I can't even see all of the effect on the video here, either, but you gave us a peek of how it should be. I love your layering.
Sooo pretty, I'm very happy I found you! Where are your instructions? I want to practice what you do. Thanks!!!
WOW... NEXT LEVEL WAVES . Christy you take these waves to the next level!! So many tutorials on waves but yours come out so beautiful and it’s definitely because you take the time and do all your projects over days and not rush to get done in one sitting. And your craftsmanship shows in EVERY project you post! I’m a huge fan of all you do. 😘❤️?.. is anything on the q-tip like silicone oil or alcohol to stop the resin from going over those waves or is it slightly tilted?
It's just a plain ole q-tip - I didn't have the coaster tilted, but there have been times when I used too much resin on this layer an😍d I had to tilt it because it all wanted to sink to the beach 😜 NOTE: I have gotten q-tip hair stuck in the waves before because I let the resin set up too long before I defined the wave - if that happens, use your finger and a napkin or spatula - as long as the resin is soft you can draw out the wave if it goes down too far.
Thank you for all your encouragement and kind words! I love doing these but am still new to TH-cam, the comments are really helpful!
Resin As You Wish I too am new to watching you tube and resin and love both. It’s fun doing some of your projects and some of my own my husband is just watching all this resin art with no place to go😂 I’m giving most away for birthday gifts etc but my grandchildren really love the galaxy look and glow part! Haven’t tried the beach wave yet but will thanks for the tip!
hi simply stunning! when you put the top coat over the sanded piece how do you keep the back clean do you tape? thank you
Love your work, could you please show the products as you use them for a little longer, it would help the hard of sight a lot x x
Ok, I do list everything I use in the comments along with a link to the item so you can see exactly what was used. Are you talking about the colors specifically?
My omission, did not probe far enough, I was just aware that I kept trying to pause when you show the product (impossible, lol) xxx Thank you for sharing x
This is magnificent! With all the different steps you must have used a lot of resin! Was there a lot of unused left over each day?
No, typically I’m making more than one at a time, but only show one or two, any excess resin I use to start the base layers in coaster molds
Its so beautifullllllll. Have you considered using real sand and checking how that turns out? Might be fun!
I have tried it, and I didn't think it was ugly, but I just didn't care for how it looked - I may have been the color I chose but to me - it ended up looking like dirt in there LOL 😜 It was a while a go, I think I may check into some white sand 👍
@@ResinAsYouWish ive seen videos where the sand looks like dirt, so i definitely agree🤣some good quality sand goes a long way.
Buenos días, te felicito es hermoso gracias por compartir, a la primera ola le colocaste algo para se se formaran las Burbujas?😮 me puedes decir el nombre, gracias como se llaman los aparatos que usas? Deseo comprar las cosas y ensayar gracias 👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻
Love your use of colours and depth. Could i ask what heat gun you used? If its a craft one or a paint stripper type thing. Agian, love your art.
Hi thank you for the compliment,! My heat gun is from hardware store, I linked it at the bottom of the comments in this video if you want to look at the specs on it. I chose it because it had attachments and a bunch of different nozzles for the end to choose from
I would love to know the colors your using & how you mixed them...ty kathy fr Boston
Hi, the video description has the entire list and links to everything I use in the video - I use 3oz cups to mix the color, 1 oz of resin mixed with a dime size bead of the paints/colors. The amount of paint used to color the resin shouldn’t be more than 2% of the amount of resin in your color cup. If the color your mix ends up transparent- add more color, or if it ends up too thick add more resin… sometimes you have to play with it a little
I'm a new fan, but I really love your work! 💕 Your layering is awesome! 😊
Can I ask what the heat gun is that you use to blow the colors around? Is there an Amazon link where I could purchase one?
Thank you! 🤗💖
Hi, I added a link to it in the comments (at the bottom) My gun is red and the red one is not in stock at the moment - but here is a green one -thank you for the compliments!
@@ResinAsYouWish thank you so much! ❤️
I love it! How do you keep the resin... day one and 2 you use so little I wouldn’t even begin to figure out the ratio since the amount it so small ... thanks
Hi, it is definitely a challenge getting used to the ratios, typically I"m only filming one, but am actually doing 2 or 3, I also will use any excess resin to make a base layer in coaster molds for upcoming projects
@@ResinAsYouWish Thank you for only filming one - it makes it much easier to watch. So many people do 4-6 coasters at a time and I am constantly fast forwarding :-) Beautiful work by the way!
Beautiful job!! May I ask how you put your logo/signature at the bottom? (I'm assuming that's what that was?!) Thank you in advance!! I have been doing paint pouring coasters and just did my first resin pours tonight - not sure how to sign them! Thanks!
Hi. they are logo stickers I got on Etsy :-)
That's what I was thinking they were! Thanks!
Are you using those acrylic paint for pigment in resin mix
yes, it's acrylic paint
Can you add a link for the cork backing if you used one?
I did use cord, but i bought a roll cut out a circle with my cricut and glued it to the back. I also use the bumpers on these - scotch, little clear knobs work really well too. I do have a link for the cork on the bottom of the standard size coasters if you are interested.
Can you still make the waves without Castin Craft?
Yes, I am just showing what I specifically use in this video
What color can I use in place of cobalt turquoise? Amazon is out of that color. Thank you!
Hi, any light teal color would work, dark blue, green, light turquoise, or even a medium blue
@@ResinAsYouWish Thank you so much!!!
I can't seem to get definition on my waves, after a few minutes it all merges into one 😔
Mine does the exact same thing! I only used acyrlic paint in my resin tho not this white pigment shown in the video
can you do this with uv resin and just cure each layer?
I don’t work with UV resin, so I’m not sure how the resin would react to blowing heat. But you could definitely do layers. If you want it to be used as a coaster I do not recommend UV resin because it would get dull with use fairly quickly - it would be fine as art or trivet
@@ResinAsYouWish Got it! thank you!! Which type of Resin do you reccomend?
@@ormondbeachchiropractic1595 I add links to the resin I use in the video description, basically - Countertop Resin, equal parts mix, with UV and scratch resistance. These typically take 3 days to fully cure, but you can pick it up and touch it within 12-24 hours
Did you let it dry each time?????
Yes, not a full cure, but hard enough to tap on
How much does one of these cost to make, and how much can you sell it for?
Hi, the cost of the resin is probably the most expensive, I list all items used in the video - so once you have all the paints, and equipment, it's just down to the resin and the time it takes to make the coasters. The project takes about a week. I sell these on Etsy for $40 each (this is a large coaster)
@@ResinAsYouWish Thank you! I actually just decided to do resin coasters for a kind of side hustle, and I love your videos.
I just can’t get cells 😩 This is a white resin pigment by Poxy Art.. it SHOULD work.. but I just keep getting this horrible white speard on top. I’ve tried hairdryer on cool, on hot, heat gun.. What am I doing wrong🤷🏼♀️ I can send you an example of what I mean
Send to me, I have a Facebook page Christy Fraser , and a facebook group Resin As You Wish. I do have a video with tips on Cells and Lacing, one of the standard things I was doing wrong when I first started was continuing to work the resin, the cells wont form if you keep messing with it.
th-cam.com/video/K4VrQLZQLYY/w-d-xo.html
Resin As You Wish awesome thanks 🙏🏻
How much resin do you use for each layer for the coasters
Hi, I usually mix 6oz of resin to do 2 of these 5.5 inch coasters at once - this includes the colors I mix
@@ResinAsYouWish Is that 6 oz Total and 2oz each layer.
Do you sell sets of coasters❤
Hi Brian I do, but I need to make some 😄
@@ResinAsYouWish Can you get ahold of me when you get a set done? Thanks big time
welcome Please cancel the violation you made against my channel, I did not know that I had content from your channel that I downloaded from another site out of ignorance of me. Please accept my apology and remove the violation you made against me because my channel is damaged and under review. Greetings to you