The teaser image is showing you hitting a water pipe or similar. That is what drew ne to this vid...thi I am glad I saw the induction heater too. Is there a vid on water accessory use with the dynapvap? I have esophogeal disease now and cannot vape with hurting and thinking water might help.
you don't really need water in the glassware to take alot of the harshness away and its quite nice seeing the cloud your pulling through it to as visual conformation sometimes. Also if you've got a dyna already try a BB9 stem on it, I found it was pretty effective at cooling stuff down.
Kinda hoped you would go a bit more in-depth on the insert adapter install, I'm happy with how mine works but i installed it competely differently from what you show (you don't show much). A lot of people struggle with the install and there is conflicting information on how it's supposed to go in
@@Egzoset what do you mean? Sure there is more conduction vs convection but why is it wrong? It's actually similar to using a single flame jet in windy conditions but obviously more reliable
@@Silor We're still waiting for more clever conversion of condictive & radiative energy into a 2-phase conduction reserve where the pre-heating time can be relatively independant from the time necessary in a Pulse Heating scenario...
I just bought the iSpire Wand & Accessories for the DynaVap. I'm having a little bit of trouble getting it heated properly. I noticed that the Wand flashes Red until I place the M in, the flash is then Orange. I wasn't getting the 'click' sound. I have the Wand temperature set to 475°, is this a proper setting? I look forward to any suggestions.
So the wand temperature is like a timer and not an actual heat setting so leave it at 475 it doesnt make a difference in heat up time. Just use the auto detect setting, double tap fire button for blinking red light. Once it detects the cap it the light will turn orange to indicate its heating. On low batteries it takes longer to click. Get the insert too makes it easier to use.
For anyone still having these issues you have to hold your dynavap slightly out otherwise it heats the stem more than the cap. The flashing red means nothing is placed in the chamber of the wand
Thank you for all of the input on the Wand. Another question, where would you go for replacement batteries? I've noticed that mines not holding a charge for more than 3-4 day's. It's an odd size, 2900 milliamps.
Why shouldn't the dynavap touch the glass? I just stick my dyna in at an angle on the non-screen side of my wand and let it rest in there while heating...
It's not working for me. I'm getting no clicks! With or without the adaptor, I tried using 3 different DynaVaps and not one clicked. Very frustrating. No idea what I'm going wrong? Why wouldn't it click with this?
Is there any device that works directly to electricity? without having to always use batteries? something thinking more for a fixed place. Or can I use this device without batteries?
Absolutely! There is a world of induction heaters for this thing, you can even build one yourself if you’re up for it, google is your friend, as is the dynavap subreddit
So I picked up a Dynavap B. First 2 times I tried to use it I combusted. 2 two times I got very little vapor. The draw feels VERY tight. My inspire wand doesn't have the dry herb button so I set the temp at 500° f . Is there a trick to using this, I'm not sure what to do. After I combusted the 2 times I only put the B in part way and like I said I only got a little vapor. Any suggestions? Ty 😊
yes, push the condenser of your B more to the back, so the air room has more volume, so the cylinder sticks out a bit around the mouthpiece. Don't hold your thumb on the airport.
This is listed on the website, however it's incorrect. Even in their demonstration video for the Wand they use an Omni, I've used it with a Vong, M, and Omni with no issues
Because the Orion is discontinued and i am not a dabber, i completely hate using the as an induction heater. I look and feel stupid walking around with this thing in my hand
You installed wrong, the silicone goes in from the bottom, and the cup goes in from the top, ispire even gives conflicting instructions on this. I imagine incorrect installation of the cup is the source of a lot of users problems, it was for me until I researched.
For the DynaVap, the wand is amazing. But for Dabs, which is what it was designed for......it completely SUCKS!!! One of the worst dabbing experiences I have ever came across. However, for the DynaVap, it's actually one of the best induction heaters I have came across lol. Crazy how that worked out 😂
@res33441 You can buy a copper sleeve for the cap and you don't have to rotate just hit one spot. You can also buy a silver one on ebay. It works the same as an induction heater just takes the cap longer to cool down. Also make it less suspicious if your outside since you don't have to move the torch around.
Heat travels upwards during convection, which is when heat is transferred through a fluid such as air. Induction like this works more a microwave oven, radiating electromagnetic energy into the steel of the cap, which makes the iron molecules spin like crazy and create heat from all sides.
Yeah and I can get just as good hits as an FMJ with my single flame and technique. But I can't do it hands free or flame free - that is what the wand brings. You are right though technique or an accessory like the FMJ all work as well.
The teaser image is showing you hitting a water pipe or similar. That is what drew ne to this vid...thi I am glad I saw the induction heater too. Is there a vid on water accessory use with the dynapvap? I have esophogeal disease now and cannot vape with hurting and thinking water might help.
water does help
We have more "thorough" how to videos on WeedTube.
you don't really need water in the glassware to take alot of the harshness away and its quite nice seeing the cloud your pulling through it to as visual conformation sometimes.
Also if you've got a dyna already try a BB9 stem on it, I found it was pretty effective at cooling stuff down.
You're wasting your time with them. Wait a decade more or so...
I USE A GLASS BUBBLER without water the glass cools the vapor sometimes i don't even feel the inhale
« When you hear the click, remove immediately », but the dude doing it on camera knows it needs about 2/3 seconds more
🧐🥱
Sometimes on your 2nd or 3rd hit you'll find those 2/3 seconds more makes a hell of a difference
Too much heat will affect the cap
@@stefanwolf8558 you’re right.
And I have to say that I perfected the way I use my Dynavap and don’t feel the need to go beyond the click anymore 😎
just dont disrespect the click on the 2nd heatup.
What temperature would you use on the wand with a armored cap
This is an absolute game changer for me just got mine today.
Ordered mine yesterday for my bday
Did you happen to overcombust in this video? 1:22 the left window shot, this happened to me whenever I had the cup installed wrong as demostrated.
at 505 degrees you can guarantee it combusted
@@RadioMcRadiofacethe temperature doesn't matter when using the Dynavap, it's just a timer
Does it work without batteries inserted when attached to an outlet?
Kinda hoped you would go a bit more in-depth on the insert adapter install, I'm happy with how mine works but i installed it competely differently from what you show (you don't show much). A lot of people struggle with the install and there is conflicting information on how it's supposed to go in
Conduction in this particular IH application is awfully wrong.
@@Egzoset what do you mean? Sure there is more conduction vs convection but why is it wrong? It's actually similar to using a single flame jet in windy conditions but obviously more reliable
See i didn't install mine the way he did. I slid my cup down the top and get really good results if I over heat by 8 seconds after the click
@@Silor We're still waiting for more clever conversion of condictive & radiative energy into a 2-phase conduction reserve where the pre-heating time can be relatively independant from the time necessary in a Pulse Heating scenario...
I just bought the iSpire Wand & Accessories for the DynaVap. I'm having a little bit of trouble getting it heated properly. I noticed that the Wand flashes Red until I place the M in, the flash is then Orange. I wasn't getting the 'click' sound. I have the Wand temperature set to 475°, is this a proper setting? I look forward to any suggestions.
So the wand temperature is like a timer and not an actual heat setting so leave it at 475 it doesnt make a difference in heat up time. Just use the auto detect setting, double tap fire button for blinking red light. Once it detects the cap it the light will turn orange to indicate its heating. On low batteries it takes longer to click. Get the insert too makes it easier to use.
@@mikec4308 Doesn't work for me. I tried everything and just like this commenter, I'm getting no clicks unfortunately. Very frustrating.
your heating the stem and not the cap, cap is too far into the wand.
For anyone still having these issues you have to hold your dynavap slightly out otherwise it heats the stem more than the cap. The flashing red means nothing is placed in the chamber of the wand
Thank you for all of the input on the Wand. Another question, where would you go for replacement batteries? I've noticed that mines not holding a charge for more than 3-4 day's. It's an odd size, 2900 milliamps.
Very helpful video thanks Josh 👍🏽💚
The temperature control acts more like a timer for dabs. It makes no difference for the Dynavap
Does the auto setting pulse the heat or not ? also i'm assuming it auto sets heat ???
The heat settings have no effect on dynavap. Pulse setting only turns off when you take out the dynavap.
are they flat top18650 batteries or button tops?
Flat
Why shouldn't the dynavap touch the glass? I just stick my dyna in at an angle on the non-screen side of my wand and let it rest in there while heating...
I was wondering this too
It's not working for me. I'm getting no clicks! With or without the adaptor, I tried using 3 different DynaVaps and not one clicked. Very frustrating. No idea what I'm going wrong? Why wouldn't it click with this?
Is there any device that works directly to electricity? without having to always use batteries? something thinking more for a fixed place. Or can I use this device without batteries?
Absolutely! There is a world of induction heaters for this thing, you can even build one yourself if you’re up for it, google is your friend, as is the dynavap subreddit
puedes usar este conectado y si, tambien hay unos que funcionan directo.
Could you cover the best way to smoke hash out of the M?
Just put hash like you would flower, same concept. :)
I love dynavap
Does it auto turn on and detect the dynavap like the orion does?
Yes it does
Where to find replacement batteries
The Ispire website: www.getispire.com/
So I picked up a Dynavap B. First 2 times I tried to use it I combusted. 2 two times I got very little vapor. The draw feels VERY tight. My inspire wand doesn't have the dry herb button so I set the temp at 500° f . Is there a trick to using this, I'm not sure what to do. After I combusted the 2 times I only put the B in part way and like I said I only got a little vapor. Any suggestions? Ty 😊
yes, push the condenser of your B more to the back, so the air room has more volume, so the cylinder sticks out a bit around the mouthpiece. Don't hold your thumb on the airport.
Correct me if wrong, but doesn’t the Wand ONLY work with the Model “M” (steel) and NOT the Titanium tips
This is listed on the website, however it's incorrect. Even in their demonstration video for the Wand they use an Omni, I've used it with a Vong, M, and Omni with no issues
lol no
Excellent l, I just did it and it was great.
Yours heats up and clicks fine? I'm getting no clicks from any of kuhe DynaVaps unfortunately. What temp do you have yours at?
I run auto mode on 250°f Love my wand 🥳
me too
Changing the settings doesn't really have any effect
Is 250 a good setting you think?
@@LFiers 250 works great for me.... some say temp doesn't matter. I went straight to 250 and it works very well.
@@SadTapir Good to hear. Why do they say temperature doesn't matter though? Why would they have that option there then?
Because the Orion is discontinued and i am not a dabber, i completely hate using the as an induction heater. I look and feel stupid walking around with this thing in my hand
You installed wrong, the silicone goes in from the bottom, and the cup goes in from the top, ispire even gives conflicting instructions on this. I imagine incorrect installation of the cup is the source of a lot of users problems, it was for me until I researched.
Interesting. Inspire says they both go in fron the bottom together. It's even on the official documents.
100% spot on
@@devonthe777 How is it spot on when the instructions say otherwise? I don't get it.
For the DynaVap, the wand is amazing.
But for Dabs, which is what it was designed for......it completely SUCKS!!!
One of the worst dabbing experiences I have ever came across. However, for the DynaVap, it's actually one of the best induction heaters I have came across lol. Crazy how that worked out 😂
Mission: Failed Successfully 🫡
What's so bad about the dabbing function?
Holy Funk that thing is HUGE
"the ice-fire wand" is such a versatile device yay!
Oh, that's how you people call Pulse Heating now? A concept actually patented with the Curie effect in mind by JAi, in 1969...
Mine burns my bowls all the time.
I'm not that coordinated
you dont need to be
The Wand is not compatible with titanium Dynavap devices.
yes it is.
@@mkgriff1492 their own website says not compatible i gguss thier liars
@@res33441 I use it all the time with the omni titanium. It works great. I bought it as a bundle with it.
@@mkgriff1492 i had the apollo 1 induction heater and threw it out i will stick to single flame jet
@res33441 You can buy a copper sleeve for the cap and you don't have to rotate just hit one spot. You can also buy a silver one on ebay. It works the same as an induction heater just takes the cap longer to cool down. Also make it less suspicious if your outside since you don't have to move the torch around.
Heat travels upwards. Shouldn't the dynavap be held upright for an even roast?
Heat travels upwards during convection, which is when heat is transferred through a fluid such as air. Induction like this works more a microwave oven, radiating electromagnetic energy into the steel of the cap, which makes the iron molecules spin like crazy and create heat from all sides.
Would be cool if you explained WHAT dabbing is.
google it ffs
seems terrifyingly un-user friendly tbh
Billions times better than using a jet lighter
No mention of the 18650 batteries or how to properly maintain them... shame on you dynavap and ispire
🤣
FMJ 10 Bucks.
Better hits then any IH
Yeah and I can get just as good hits as an FMJ with my single flame and technique. But I can't do it hands free or flame free - that is what the wand brings. You are right though technique or an accessory like the FMJ all work as well.
What is a FMJ , what does stand for ? Thank you @@ianharding4569