Analysing the 1-Knob Compressor of TASCAM Model 12 Digital Mixer
ฝัง
- เผยแพร่เมื่อ 12 ส.ค. 2022
- To support my channel:
www.paypal.me/RecordingStudio9
/ recordingstudio9
Website:
www.recordingstudio9.com
Instagram:
/ recstudio9 [@RecStudio9]
Tweeter:
/ recstudio9 [@RecStudio9]
#tascam #tascammodel12 #audiocompressor #1knobcompressor #audiomixer #audiointerface
20221225 - เพลง
Thanks for helping me to better understand what my Model-12 is capable of doing.
Here from the Model 12 Forum, Thank you for this Video !
So so helpful, thanks a lot for your work!
Fantastic videos here. Thank you for making them!
Thanks for watching!
Thank you! That explanation is complete and clear
Exactly the info I was looking for, and then better.
You just saved me so much time, thank you.
This was super helpful!. Thanks a lot!👏👏
Wow, that was fast!. Thank u!
Another stellar video, lots of really helpful information presented in a straightforward manner. I'm learning so much about the model 12, looking forward to getting one myself!
Glad it was helpful!
@@RecordingStudio9 All your videos are super helpful, thanks for sharing your knowledge! Would it be possible to record your videos at 1080P so we can see more detail on the mixer, overlays and other equipment you use during your demonstrations? Also, could you find a small piece of tinted translucent material to lay on top of the Model 12 screen to give it "sunglasses" so it's not washed out? Keep up the great work! Looking forward to your next Model 12 video.
@@chrisjohnston964 Thanks for the feedback. If every viewer of this video donated $1, then I'll be able to afford a new camera and better production. But making around $200/month from TH-cam from ALL of my videos doesn't cut it.
Maybe one day :)
So valuable! Thx!!!
Great explanation
Thank you so very much for this video !
Glad it was helpful!
Great video thanks
thank you SO MUCH!
You're welcome!
Really great info. Very much appreciated. And also im really surprised thats how it works, i would have assumed it would start low ratio and go higher the more you turned it up. But ive never used a 1 knob compressor!
Glad it was helpful!
Oooh nice
can you show in practice how to use a vst native instruments bass guitar and record it in the tascam model 12?
Thanks my friend 🙏🏼 small question about this mixer, how do you rate it in terms of preamp quality? I mean in comparison with good audio interfaces (let’s say your latest Presonus interface that you bought for the studio). My worry is the noise floor / self noise of the pres because I’m planning to hook couple of dynamic mics for podcasting. Thanks in advance dear 😃
Thanks, that may be my next video.
@@RecordingStudio9 Wow Fantastic! Now I’m turning the notifications ON for your channels 😂 can’t wait 🤩
@@RecordingStudio9 I look forward to that video too! Thanks for this great viedo it answered all my questions about the one knob compressor on these units. How does this compressor compare to the compressor on the Behringer UFX 1604. In fact how does the desk's sound compare overall to the behringer?
@@JamieGFletcher They sound a lot different since UFX1604 I have is 95% analogue compared to the Model 12 being 95% digital.
@@RecordingStudio9 That is what I'm curious about. I have a presonus Studiolive but I'm considering getting something with an analogue signal chain. It's hard to find an analogue desk that will record post fader like the behringer will. I saw in one of your video that the tascam model 12 will also record post fader and I'm curious as to which sounds better?
Does anyone know what ratio it works at initially? Is it working like an 1176 where it’s an all in at like 20 to 1 ratio?
Damn. That release time seems way too fast. Is it program dependent? I noticed the signal you were sending was a quick blip. What if you sent it something like a ringing out bass note? Also does the compressor introduce any aliasing in the high frequencies?
I only tested with mid-high range 4Khz tone. Not sure of lower frequencies. If I get the chance, I'll test.
test tones can only give you a rough idea as they aren't typical of actual audio. it would be good to see result with vocals, guitar and bass as you mention.
@me_fault You are correct, test tone doesn’t equal to an actual voice or instrument audio, but, it’s not as easy to demonstrate.
I wonder what about the optical compressors of Model 16 and 24
Unfortunately I don’t own them to test.
@@RecordingStudio9 thank you very much for the video and your reply, Maybe someone who has Model 16 will use the tools you showed and test its optical compressor parameters. All the best 🙂
Lets see this with the Korg MW-2408. Developed by Greg Mackie and Peter Watts. Its a comparable model at the same price point. Also with a 1 knob compressor
The KORG has lot more mixer options but, only stereo usb to a PC, where Model 12 sends individual channels to USB and returns them back.
👍👍🍀
Great video ! Something about that word just looks wrong. Analysing, analyzing is the spelling over on this side of the pond.
It’s correct at my part of the world 😊
You are on the wrong side of the pond.
hello, I ask you for information: I have 2 external effects, each has the classic line in and out (double jack for both input and output), how can I integrate it into the mixer? how many AUX are there in the Tascam? and SEND / RETURN? On the other hand, can the internal effects be managed independently?
For the rest, I need at least 12 free channels, including a voice channel, so could be the Tascam 24 enough?
Many thanks!
Visit TASCAM website for more details on which one to choose for your specific purpose.
Disable autofocus on your camera. It's hard to watch.
Thanks. I keep forgetting to do that.
Disable your TH-cam account.
Someone already disabled your brain.
@@fromgreetingslol jeezus. Nice guy right here