Hi Mitch! I highly appreciate your videos. learned a lot about my 300 GTS. Keep on going mate, great stuff you present here! All the best from Switzerland, Andy
Hey Mitch. Love what you do man, really helping us out here! If you can hear me out for a second I'd really appreciate it. Have a brand new stock ruckus, 800 miles. Well maintained. When I ride it now the wheels feel bumpy (back especially) tires and rims are in great condition. No punctures, warps or airbubbles and rims are perfect. Psi at 25. It's almost as if the tire raises and lowers a bit on each rotation causing it to feel very bumpy and unsafe. Have you run into this issue?
Hello my friend. I strained the oil plug seat a little while changing the oil. The screw is solid, but I stripped the slot, the place where the screw went in. The master came and closed the gasket again. The liquid seal lasted. Is the liquid seal safe? Will I have a problem after a certain period of time due to overheating while driving long distances? This is the first time in my life that I see such a product. I looked online. The whole world uses it. Do you think there will be a problem? Thank you please.
Hi Mitch, just did an oil change was riding down the street when the bike cut out. Gave it 5 minutes then started it up again and went home. The exhaust smells like it's burning and it's was really hot. What's happening here do you think?
@@rkstew haha yes! Thinking about find one… I have some in WA state at cousin’s and dad’s shop and some in Texas at friend’s storage unit, trying to save up $ to ship all to maui once I find a place for them 😅
I don't know why you do it considering your experience but you should not screw in the dipstick to check the oil level! You should only place the dipstick without screwing it in to check the level!
@@MitchsScooterStuff Ah i see, i have never come across that way before, it just shows you need to read the owners manual doesn't it. Sorry to question you it's just i've never heard of that way before. Keep up the good work brother your an inspiration!
I am trying to figure out which oil to buy. When I look at the Motul 5w-40 it says it’s for vehicles. Can you clarify exactly which oil to use? This is my first time changing the oil in my LX150 so I want to make sure I use the best. Thank you!!
When I did an oil change on my two stroke Vespa all I did was drain old oil from the tank into a bowl then refill will full synthetic 2 stroke oil,I have a video of what I did on my channel
Hi, who told you that? 😬 Here's what the manual says: "Place the vehicle on its center stand on flat ground. Remove the cap/dipstick, wipe it clean with a cloth, and reinsert it, screwing it down completely. 'Screwing it down completely."
*** Tools I used in this video:
Engine Oil 5w-40 - amzn.to/1KGhJ4F
Oil filter HF183 - amzn.to/1Qtzybw
24mm wrench - amzn.to/2FnwOgT
Oil pan - amzn.to/3bOmT5Q
Funnel (long) - amzn.to/2v5mYLn
Funnel (short) - amzn.to/2HY4m6g
Nose pliers - amzn.to/2yetDDj
Rags - amzn.to/2Yh8jvg
Channellock pliers - amzn.to/2CMrVLq
Crowfeet 24mm - amzn.to/3939sjU
Torque wrench 0-150 lb/ft 3/8 drive - amzn.to/2Crqq4R
Electrical tape - amzn.to/2FEeQH2
Paint tape - amzn.to/3cjfpFN
Measure cup - amzn.to/3NUOz96
Hi Mitch! I highly appreciate your videos. learned a lot about my 300 GTS. Keep on going mate, great stuff you present here! All the best from Switzerland, Andy
Thank you Andy! Happy to help!
Nice work dude! About to change oil to my 125 LX. Keep up the good work 👍🏻
Thank you! Right on! 😄🙌🏼👍🏼
Thank you Mitch , you made it so easy , I changed the oil and the trans . too 😃
Nice video with good info and instruction. Good recommendations for what I will need. Thanks.
Hey Mitch. Love what you do man, really helping us out here!
If you can hear me out for a second I'd really appreciate it.
Have a brand new stock ruckus, 800 miles. Well maintained. When I ride it now the wheels feel bumpy (back especially) tires and rims are in great condition. No punctures, warps or airbubbles and rims are perfect. Psi at 25.
It's almost as if the tire raises and lowers a bit on each rotation causing it to feel very bumpy and unsafe.
Have you run into this issue?
Hey, is the nut tightened? Wheel bearing okay? Shake the wheel to see if you notice something
Hello my friend. I strained the oil plug seat a little while changing the oil. The screw is solid, but I stripped the slot, the place where the screw went in. The master came and closed the gasket again. The liquid seal lasted. Is the liquid seal safe? Will I have a problem after a certain period of time due to overheating while driving long distances? This is the first time in my life that I see such a product. I looked online. The whole world uses it. Do you think there will be a problem? Thank you please.
thank you very much for the video but having 2000 t4 150 how much oil should be put in the engine? The meter cannot be seen from the video !!!
Thankx Mr. Mitch!
😄👍🏼
Hi Mitch, just did an oil change was riding down the street when the bike cut out. Gave it 5 minutes then started it up again and went home. The exhaust smells like it's burning and it's was really hot. What's happening here do you think?
Over filled prehaps
Hi Mitch I have a 125 2014 and no dip stick or filling hole ! Different model - no kick start - can you advise ?
Είσαι τέλειος προσέχεις πολύ, μακάρι να γίνονταν έτσι οι δουλειές στα συνεργεία, Αλλά δεν γίνονται δυστυχώς
Και που να έβλεπες πως άλλαζαν λάδια την δεκαετία του 70 και του 80! 😂😂😂
Hey Mitch, how many scooters do you currently own?
20
Holy crap! You need a warehouse😂
@@rkstew haha yes! Thinking about find one… I have some in WA state at cousin’s and dad’s shop and some in Texas at friend’s storage unit, trying to save up $ to ship all to maui once I find a place for them 😅
what is the effect if oil filter didnt turn 3/4?
What kind of oil did you use?
Link in description box
Love it👍👍🇬🇧🇬🇧
😄👍🏼
I don't know why you do it considering your experience but you should not screw in the dipstick to check the oil level! You should only place the dipstick without screwing it in to check the level!
in manual it says screw it then check it
For Vespa you have to screw it all the way in
@@MitchsScooterStuff Ah i see, i have never come across that way before, it just shows you need to read the owners manual doesn't it. Sorry to question you it's just i've never heard of that way before. Keep up the good work brother your an inspiration!
Great video thanks
Which brand oil did you used in this vehicle ??
Motul ... I also use amsoil and purple royal too
I am trying to figure out which oil to buy. When I look at the Motul 5w-40 it says it’s for vehicles. Can you clarify exactly which oil to use? This is my first time changing the oil in my LX150 so I want to make sure I use the best. Thank you!!
Super gemacht
When I did an oil change on my two stroke Vespa all I did was drain old oil from the tank into a bowl then refill will full synthetic 2 stroke oil,I have a video of what I did on my channel
Very nice
Thanks
Drain plug PN # 826165 and o-ring # 285536 FYI 😉
İ remove the muffler for this operation....
Yeah easier job but more work 😆
Cảm ơn rất nhiều.
I still gave this a thumbs up but I'm an anti 4 stroke, 2 stroke supremacist.
Check the oil on my et4 today ✔️
😄🤙🏼🤙🏼 I got ET4! Will post videos on it soon
Belt tightening, oil filter friend.
Thankyou
top👍👍
Thanks!
I wish the dipstick on my 2019 GTS wasn’t so damn hard to reach 😫
Oh man yeah I use nose pliers to reach
Another great video Mitch... but what a crappy design for changing oil... oh wait, the Italians designed it so it makes sense... 😂
😂😂😂
انت رائع
Change your oil every 1000km its not a car they take more rpms/heat and expand more then get more damage
And I recomend to use 10w40 semi synth
👍🇲🇨
🙏🏼
Mitico
Young Jennifer Lee Anthony Lee Sandra
unprofessional...just put the dipstick on, do not screw it in to measure the oil level.
Hi, who told you that? 😬 Here's what the manual says:
"Place the vehicle on its center stand on flat ground.
Remove the cap/dipstick, wipe it clean with a cloth, and reinsert it, screwing it down completely.
'Screwing it down completely."