Thanks to you posting this video, I saved myself $90 and did it myself. Despite everything on my vehicle working last night, dealership tried charging me for a bulb replacement for being out. As a small female with blonde hair I tend to deal with men making the assumption I am dumb quite often. I don’t have someone handy nearby anymore as I would normally trade work. Pissed off I bought one myself, watched the video once, and got the job done. Yes, my rather girlie soft hands are tore up but hey... F U dealership... do it my damn self 🤣🤣🤣 Thank you for taking the time to post and explaining the detail without making a boring long video 😜
@@Coolrockndad the kicker... the mgr at dealership gave me an attitude for doing it myself. Asked if I wanted someone to ‘double check my work’. It’s a lightbulb bro... I’m pretty sure it would have fallen or went out if it wasn’t in right 🙄 Plenty of other work I wouldn’t dare attempt but they should be proud when someone takes initiative on smaller things. 😎
You are a lifesaver, I was about to dismantle the whole top of my JGC just to change the lightbulb. At the dealership here in Mexico, they wanted to charge me $150 just to change a $15 bulb.
Thanks I made a wood block to hold my bulb, sales person, said oil from your hand might blow bulb.with block did all from the top. Moved the whole electric panel push tab slides out. Your video was a great help.
There is a tab at the top of the ECM bracket. Push it and it will allow you to pull up and get the ECM out of your way. It gives you a lot more room to work.
At the 3:17 min of the video you indicate the “Big connector”. I made a dumb mistake and tried to start the car before reconnecting. The car flooded and would not start. Just turn over for a long time. I reconnected and the car started but had the check engine and and the dash was lighting up with issues. The engine was slugging also. I chose to disconnect the battery under the seat for 15 min. And that reset fixed the computer issues If you do something dumb like me, I hope this helps. Thank you for the video
After messing with it for a while with scratches all over my hand.... I finally figured it out. That big metal stuff with 2 large connectors comes off. With it removed, you can now easily access everything, the bulb cover and the bulb. To remove that big stuff, just push the locking plastic located on top and to the left. Lift the entire thing off and put it on the side - you do not have to disconnect the connectors. Let me know if you have questions...
Thanks 4 ur help. I appreciate all the tips. I had the same issue. My driver side went out first (I had someone else do it for me) now the passenger side went out and did myself. Thanks again.👍
Thanks, appreciate this! Changed out the passenger lamp for a friend. What a pain in the ass this was to do. I have large hands so it wasn't fun, and I used gloves as well.
My hand is too big even with sliding the large silver piece out of the way. This makes me rethink ever buying another Jeep due to their laziness, ignorance, & pure lack of consideration for their consumers with this ridiculous design of something as basic as changing a headlight
My hints; spray WD40 on bulb, let penetrate, to ease the "2 finger" CCW twist" (wipe off excess so grip is better) and add a bit of vaseline to new bulbs" O ring gasket to facilitate insertion. . To remove bulb from top (PS side), move ECU out way, stand facing the Jeep, use lt. hand with top of hand facing rear of Jeep, and reach into bulb. 2 and 3rd fingers do most of the work !! Before removing bulb, eyeball its orientation, even draw a diagram, to get new bulb close to reinstall flanges. Replace OEM H11 bulbs with H9 bulbs--Google Search how to mod H11's to fit (v. easy). You gain 2300 lumens vs 1650 lumens from this 65W vs 55W bulb. I changed the fogs to H9's 2 years ago and there is no evidence of connector or wiring overheating.
@@benydominguez8494 I'm sorry. Maybe if you disconnect the battery, then unplug and re-plug the connector it will clear. Also, I wouldn't be surprised if it clears itself after 5-10 restarts.
if you have a WK2 Jeep GC, there is a hole in the black plastic cover over the headlights that accesses a philips screw about 6 inches down. Screwing CW/CCW moves the whole headlight up/down, low and high beams together. Park on level surface about 15 ft. from wall/garage door and adjust at night. My lows sit about 3.5 feet off ground and highs are right on top.
As Rich Luckie said below, "There is a tab at the top of the ECM bracket. Push it and it will allow you to pull up and get the ECM out of your way. It gives you a lot more room to work." I hope that works for you.
why would you put in the cheapest least bright bulb in the market....cheap bulbs don't last..do your research.. you spent all that money on those tires an you buy cheap 8.99 bulbs at walmart...good bright lights (leds are amazing) will save your life like a good tire in the snow..its common sense that could save your life. you guys with big hands ..just pay a teenager 10 bucks an he will stick his skinny arms down the front an be done in 5 min. work smarter not harder
![[LIVE] : ONE ลุมพินี 83 วันนี้!! คู่เอก "พันฤทธิ์ vs ซุปเปอร์บอล วันของโอม MBK"](http://i.ytimg.com/vi/1b4pkKHa_Fk/mqdefault.jpg)
Thanks to you posting this video, I saved myself $90 and did it myself. Despite everything on my vehicle working last night, dealership tried charging me for a bulb replacement for being out. As a small female with blonde hair I tend to deal with men making the assumption I am dumb quite often. I don’t have someone handy nearby anymore as I would normally trade work. Pissed off I bought one myself, watched the video once, and got the job done. Yes, my rather girlie soft hands are tore up but hey... F U dealership... do it my damn self 🤣🤣🤣
Thank you for taking the time to post and explaining the detail without making a boring long video 😜
I'm glad it helped and thanks for the positive comment.
Same here. Dealer wanted $150 to change it and another $50 for the bulb. I bought the bulb in a 2 pack for $30 and did it myself. Yes FU dealership!
@@Coolrockndad the kicker... the mgr at dealership gave me an attitude for doing it myself. Asked if I wanted someone to ‘double check my work’. It’s a lightbulb bro... I’m pretty sure it would have fallen or went out if it wasn’t in right 🙄
Plenty of other work I wouldn’t dare attempt but they should be proud when someone takes initiative on smaller things. 😎
You are a lifesaver, I was about to dismantle the whole top of my JGC just to change the lightbulb. At the dealership here in Mexico, they wanted to charge me $150 just to change a $15 bulb.
Thanks I made a wood block to hold my bulb, sales person, said oil from your hand might blow bulb.with block did all from the top. Moved the whole electric panel push tab slides out. Your video was a great help.
There is a tab at the top of the ECM bracket. Push it and it will allow you to pull up and get the ECM out of your way. It gives you a lot more room to work.
At the 3:17 min of the video you indicate the “Big connector”. I made a dumb mistake and tried to start the car before reconnecting. The car flooded and would not start. Just turn over for a long time. I reconnected and the car started but had the check engine and and the dash was lighting up with issues. The engine was slugging also.
I chose to disconnect the battery under the seat for 15 min. And that reset fixed the computer issues
If you do something dumb like me, I hope this helps. Thank you for the video
After messing with it for a while with scratches all over my hand.... I finally figured it out. That big metal stuff with 2 large connectors comes off. With it removed, you can now easily access everything, the bulb cover and the bulb.
To remove that big stuff, just push the locking plastic located on top and to the left. Lift the entire thing off and put it on the side - you do not have to disconnect the connectors.
Let me know if you have questions...
Thanks 4 ur help. I appreciate all the tips. I had the same issue. My driver side went out first (I had someone else do it for me) now the passenger side went out and did myself. Thanks again.👍
Glad it helped!
Thanks, appreciate this! Changed out the passenger lamp for a friend. What a pain in the ass this was to do. I have large hands so it wasn't fun, and I used gloves as well.
Again thanks Phil!
All terrain Nitto tires are not nearly as loud. I loved them, might get another set..
My hand is too big even with sliding the large silver piece out of the way. This makes me rethink ever buying another Jeep due to their laziness, ignorance, & pure lack of consideration for their consumers with this ridiculous design of something as basic as changing a headlight
It sucks to change the headlights on JGC. Took me about 2 hours to change it both :(
My hints; spray WD40 on bulb, let penetrate, to ease the "2 finger" CCW twist" (wipe off excess so grip is better) and add a bit of vaseline to new bulbs" O ring gasket to facilitate insertion. . To remove bulb from top (PS side), move ECU out way, stand facing the Jeep, use lt. hand with top of hand facing rear of Jeep, and reach into bulb. 2 and 3rd fingers do most of the work !! Before removing bulb, eyeball its orientation, even draw a diagram, to get new bulb close to reinstall flanges. Replace OEM H11 bulbs with H9 bulbs--Google Search how to mod H11's to fit (v. easy). You gain 2300 lumens vs 1650 lumens from this 65W vs 55W bulb. I changed the fogs to H9's 2 years ago and there is no evidence of connector or wiring overheating.
Craig Moore mine is stuck. I can’t get it to budge. Not sure about using wd40 though
Wd did the job hell yeah
Well it took 45 minutes & yes I had to use gloves but I did it. Thanks
Glad you were successful and saved yourself some money!
Thank you thank you thank you. What a pain. Doing it from the top was way easier!
Bout to attempt mine this morning. Lol
Don’t put your fingers on the bulb, because of the oil in your skin. Bulb gets hot and burn out early
Did you check engine light come on after unplugging that big plug?
No
It did for me 😫
@@benydominguez8494 I'm sorry. Maybe if you disconnect the battery, then unplug and re-plug the connector it will clear. Also, I wouldn't be surprised if it clears itself after 5-10 restarts.
GoPro Horses & More mine did as well, how did you fix it?
@@BlackoutWS6 it went away after a day
Thanks!
Is there a way to adjust the low beam up and down?
you need a long-ish philips head screwdriver to aim the low beam, there is a hole in the housing it's pretty easy just google it!
if you have a WK2 Jeep GC, there is a hole in the black plastic cover over the headlights that accesses a philips screw about 6 inches down. Screwing CW/CCW moves the whole headlight up/down, low and high beams together. Park on level surface about 15 ft. from wall/garage door and adjust at night. My lows sit about 3.5 feet off ground and highs are right on top.
I have a 2015 and there is no way I can turn the build to get it out
It helps to push in on the bulb as you twist it. It takes less than a 90 degree twist to pop it out.
DO NOT UNPLUG FROM ECM. CAN BRICK YOUR CAR!
Use rubber gloves
I cant get my hand in there to save my life...
As Rich Luckie said below, "There is a tab at the top of the ECM bracket. Push it and it will allow you to pull up and get the ECM out of your way. It gives you a lot more room to work." I hope that works for you.
why would you put in the cheapest least bright bulb in the market....cheap bulbs don't last..do your research.. you spent all that money on those tires an you buy cheap 8.99 bulbs at walmart...good bright lights (leds are amazing) will save your life like a good tire in the snow..its common sense that could save your life. you guys with big hands ..just pay a teenager 10 bucks an he will stick his skinny arms down the front an be done in 5 min. work smarter not harder
I guess I just don't have any connections to teenagers who stick their fingers in things for money like you must.
Please don't use the LEDs there too bright!
Lol chill. 99% of the ppl here are not gonna ask a teenager, and why are u so hostile. This guy did a lot of ppl a favor. U did not.
Nice reply
Piece of 💩 car. Crazy to change a damn bulb