Simply Outrageous and wonderful build! I'm surprised that your rear bump-stops allow as much flex as they do - the little XJ's fender wells can only be trimmed so far... I've seen other builds with a sway-bar off a grand Cherokee with l-o-n-g disco links to assist street safety; do you have anything in mind for your build?
Gary Button I have lots of things planned for my Jeep but unfortunately is my daily right now. I soon as I get a new daily the jeep will get into surgery Lol
So you did all this yet I noticed your track bar and axle really isn’t much higher than the guy on 33s . Honestly clearance is the goal and this just seemed money wasted
The 44s are for gears to move 37s yet all the money spent yet the Chrysler rear and 35 front with 33s are just fine less money almost same lift and as equally as capable
Guys with 33s and stock axles sound like the fox who can't reach the grapes In the Aesop fable . Also since a 37 is only 2 inches bigger on the radius you are only going to gain 2 inches of axle clearance over a 33 ,but 2 inches is often a lot but obviously it doesn't look like a lot . It's also not just the direct 2 inches you get either that get you more clearance the larger tires don't get lost in the gaps of obstacles so you end up sitting up higher rather than having your tires drop into holes/gaps a smaller tire does. If you really want to be stupid the guys arguing for 33s because it costs money to upgrade for 37s ...well why aren't you rolling around on stock 29s why did you waste money going up 4 inches to 33s .
I mean he would have 2” more axle clearance as well as 2” more suspension height, which translates to more flex, which translates to handling the trail better.
Love the Jeep man! For a cherokee drivetrain and power plant I would have gone with deeper gears personally. I ran 4.88s on 33s then 35s. With all the additional weight and tire height 5.13 would be ideal.
Sucks that here in northern NY anything that old is 100% pure garbage from rust. I went and looked at a 09 jk 2 door with 112k on it a few months ago, the frame was pure scale and it needed floor boards but they still asking $15k 😳😳😳
Mines getting cut up soon. Already had some old junk ripped out from under the hood too if you think its worth that much guy. Pretty sure the aluminum head on my motor is worth as much as your stock jeep 😅
Old jeep is the profile pic. Running almost the same setup. Not really. 7.5 lift 37. 30 front trussed c gusset 4.88 lunchbox. 8.8 rear trussed e locker. Iro 3 link front custom anti wrap rear Link. I have no bumpstops in the rear and it just touches My cut and fold.
@@robertmoore-gc8chThank you for reply. This only for xj. There are any formula or application can help to knows the maximum wheel size for all vehicles or only by trying and error.
How do you recalibrate the speedometer? Or do you just guess at how fast you're going? I just put 40's on my previously 2wd Toyota & my speedo does not read the right speed. Not due what to do
I have not re-calibrated the speedometer yet but I have a good idea how fast im going, usually 5-7 miles faster than the indicated by the speedo (with 33s) the larger the tires the more difference there will be.
I just bought JLU Rubicon 44s with mounted 37" Tires on 17s... I'm so stoked to four link them up to my 91 2 Door XJ.... Sick bro! I might hit 65 MPH with stock 4.10 Ratio and with the wind behind me.
What front bumper do you have installed? Been looking for one but all I have found have a winch and I don't really need one and don't want to pay the premium for it.
You can turn 37s with a Briggs and Stratton if you have it geared properly, and as a florida native, you realize we have a fucking huge mudding scene right? Or are you just completely ignorant bout everything you talk about?
Stunning upgrade. We have XJ with 33s and it is doing great. I cant even imagine offroad performance with 37s..
Sounds really good getting on it
Simply Outrageous and wonderful build! I'm surprised that your rear bump-stops allow as much flex as they do - the little XJ's fender wells can only be trimmed so far... I've seen other builds with a sway-bar off a grand Cherokee with l-o-n-g disco links to assist street safety; do you have anything in mind for your build?
Gary Button I have lots of things planned for my Jeep but unfortunately is my daily right now. I soon as I get a new daily the jeep will get into surgery Lol
what all needs to be done to put 37 inch tires, I have a jeep grand cherokee zj 5.2 V8
Your back.... Looking forward to more videos.....
Video was very entertaining I am currently going from a 33 to a 37 on tons with my xj
I’m on 33s but definitely eyeing the 37s 🤔
Now I want a jeep Cherokee lifted
Been a while bro!! Was wondering what happened !!
Mario school man, I had to stop this and focus more on my classes. But now I’m back.
Que aceite yeba la jaja automática la gran cheroka modelo 98
Nice build, I’m just trying to get mine on 33-34’s lol
I want one !
Thanks for the video.
What has he done with his motor & gearing?
😁
Maximus Prime yeap and stock engine
@@VehicleTribe didn't sound stock? Thx
@Maximus Prime thx
Trash barn oh that’s just a muffler delete same as in mine. But bone stock engine for sure. Np
@@VehicleTribe crazy... sounds great!
😁
Prefer 33's xj.
What lift you have
So you did all this yet I noticed your track bar and axle really isn’t much higher than the guy on 33s . Honestly clearance is the goal and this just seemed money wasted
Maximus Prime yes but a 35 front and a Chrysler rear are absolutely strong enough .
The 44s are for gears to move 37s yet all the money spent yet the Chrysler rear and 35 front with 33s are just fine less money almost same lift and as equally as capable
Guys with 33s and stock axles sound like the fox who can't reach the grapes In the Aesop fable .
Also since a 37 is only 2 inches bigger on the radius you are only going to gain 2 inches of axle clearance over a 33 ,but 2 inches is often a lot but obviously it doesn't look like a lot . It's also not just the direct 2 inches you get either that get you more clearance the larger tires don't get lost in the gaps of obstacles so you end up sitting up higher rather than having your tires drop into holes/gaps a smaller tire does.
If you really want to be stupid the guys arguing for 33s because it costs money to upgrade for 37s ...well why aren't you rolling around on stock 29s why did you waste money going up 4 inches to 33s .
I mean he would have 2” more axle clearance as well as 2” more suspension height, which translates to more flex, which translates to handling the trail better.
@@tay5658 Flex is over rated
Man all my views for my video comes from here 😂😂😂
Love your vids but dammit man quit saying "guys".
thanks, I don't notice it until I'm editing the video. I'll work on that
Is that the stock 4 liter inline 6?
Love the Jeep man! For a cherokee drivetrain and power plant I would have gone with deeper gears personally. I ran 4.88s on 33s then 35s. With all the additional weight and tire height 5.13 would be ideal.
Glad you're uploading again. Was worried you gave up. Really like your content.
Jesse Waldo thank you man! Will be posting more regularly
@@VehicleTribe can't wait.
I was gonna subscribe, but then the dudes in the video looked like they would eventually upload a video of them rapping.
Drive where on payment that's, not the point of these vehicles they drive like trash on asphalt
About time....
Sucks that here in northern NY anything that old is 100% pure garbage from rust. I went and looked at a 09 jk 2 door with 112k on it a few months ago, the frame was pure scale and it needed floor boards but they still asking $15k 😳😳😳
that sucks big time!
Not a hater here, but keep on Hacking them XJ's cause it makes my stock one more valuable. :)
For you
The Jeep on 37s would sell more than what you think you could sell yours for😂🤦🏾♂️
ok boomer
no it doesnt
Mines getting cut up soon. Already had some old junk ripped out from under the hood too if you think its worth that much guy. Pretty sure the aluminum head on my motor is worth as much as your stock jeep 😅
Old jeep is the profile pic. Running almost the same setup. Not really. 7.5 lift 37. 30 front trussed c gusset 4.88 lunchbox. 8.8 rear trussed e locker. Iro 3 link front custom anti wrap rear Link. I have no bumpstops in the rear and it just touches My cut and fold.
What size rim u have 15 by what?
Very nice. It takes a lot of money and work to look that good. Great job.
Does this mean there is going to be more uploads?!?!?!
Yes sir!
I'm looking to put 37s on my xj I'm just curious did you have to get longer drive shafts?
How I can know the maximum suitable tire size and wheels I can fit with the manimum modification for on road Daly drive.
Max tire size I would say for a jeep xj with no lift would be a 30 or 31 inch tire
@@robertmoore-gc8chThank you for reply. This only for xj. There are any formula or application can help to knows the maximum wheel size for all vehicles or only by trying and error.
Do some research?
Nice build. Toyota guy here it will always acknowledge a solid build.
What rims are on the 37 inch tire jeep ?
We need a 2023 boxed xj this truck is fuming 🤤🤤😍
Don't you have problem with the death wobble???????
That play in the steering though...
he still has a couple of things to adjust, Is a Jeep never ends lol
Warming up that trans. NEED MORE POWER
The 4.0 does not seem to like it. 4.0 stroker drop in maybe?
Watched it until I seen the Manbun! Had to shut it off!!🤣🤣🤣✌
Been waiting on a new vid man damn
Haha I was kinda busy with school but I’ll try to post at least once a week now that I have less classes.
Looks pretty damn good.
How is he liking the 4.56s and the 37s?
Just curious how many miles are on both of the jeeps?
Mine is over 170K and JC's should be close to 150K-160K if I'm not mistaken
Over kill
How do you recalibrate the speedometer? Or do you just guess at how fast you're going? I just put 40's on my previously 2wd Toyota & my speedo does not read the right speed. Not due what to do
I have not re-calibrated the speedometer yet but I have a good idea how fast im going, usually 5-7 miles faster than the indicated by the speedo (with 33s) the larger the tires the more difference there will be.
I just bought JLU Rubicon 44s with mounted 37" Tires on 17s... I'm so stoked to four link them up to my 91 2 Door XJ.... Sick bro! I might hit 65 MPH with stock 4.10 Ratio and with the wind behind me.
$4K axles, rims and tires with 5k miles on them. In case anyone wonders what JLU Rubicon Axle setups go for in UTAH
Get some fender flares Javier! Cool trucks
The only time that jeep flexes is with the forklift.
How wide are these 33s?
What front bumper do you have installed? Been looking for one but all I have found have a winch and I don't really need one and don't want to pay the premium for it.
Look up JCR off-road bumpers. They have non winch versions
Man Bun
You have the Deegan Pro 2 wheels.
I might copy the 37" setup its just a badass
Awesome awesome build keep it coming
What muffler do you have on it
I NEED DETAILS ON THE BUMP STOPS
Where did you get the 37 inch tires?
Finally a smart man who replaces the axles... on his Jeep. Everyone else be snap crackle pop.
shhhhh a d30 will hold on 37s if you dont drive it at all...
@@dangerdeven hah..well it definitely is mall approved tires.
That one on 33’s is clean AF
Where can I buy that front bumper?
STT pro for the win
too big imo for the xj. That engine just doesn't have much power. Also, where you going with that in FL, the beach?
its regeared to handle those tires, he engine does perfectly fine with 37's
You can turn 37s with a Briggs and Stratton if you have it geared properly, and as a florida native, you realize we have a fucking huge mudding scene right? Or are you just completely ignorant bout everything you talk about?
How slow is it
Its goot to se you again :-)
Gašper ajdnik thank you
Looks just a little odd
The sexiest jeep ever!!!!!!!!!
Welded the drop bracket to the frame?
You mean you welded it to the unibody.
Welcome back
Thank you!
Well where do you get the Rears
Nice build 👌👌. What exhaust is he running
keith hirahara stock With muffler delete 👍🏻
Nice jeep and it moves very fast.it has the 6 inline engine?
yes, stock 4.0L
Thanks i have a grand cherokee zj with 6 in line engine with 32 and a 3.5 lift kit.
you need portal axles with those 37s
Owen Bondar not budget friendly lol
Q rollo 🙃
So gas mileage
the jeep on 37s is doing 11-12 mpg i believe
Hi
How bad is the mpg with 37s?
Pretty bad...
I think he was doing 11-12 mpg if I'm not mistaken.
What bumper is that on jeep with 37s?
That's a Dirt Bound front bumper
The manta ray bumper
Can I join the tribe 💯🖤?
I want 37s now