Look at 2:40, the muffler is melting the insulation under the mesh shielding. Anyway, I have one of these an it works perfectly. I have in installed in a Kangaroo Delta wing spinning a 12x6 three blade. The electronic ignitions make these small engines totally usable, easy to start, good fuel economy and fuel cost. If you want a little better quality, OS Max in getting on the small gasoline engine band wagon. They have 4 and 2 stroke gas engines but I think the smallest one is 32cc for now.
Oi amigos, gostaria de saber quem tem o endereço da walbro para eu comprar o reparodo carburador k10wat. Para ser colocado no motor GTH 9 CC POR NAO CONSEGUIR NEN ALTA E NEN BAIXA ROTAÇAO NESTE MOTOR, JÁ FIZ DE TUDO E NÃO CONSEGUI. SE ALGUEN SOUBER POR FAVOR MANDE-ME PELO IMAIL. monteiroademar6a@gmail.com Ficarei muito grato.
Hi, I want to buy a carburetor engine gt9cc, as shown in Figure your videos. Currently carburetor engine's new gt9cc not like it, you notice this, would you please let her know you have it not, and said deposit rates to how much VietnamNGH GT9 their videos are viewed here
Hi, the shipping cost for a NGH 9cc carb through EMS express is 15USD. Another cheaper way is ship through Hongkong Post, which cost around 4USD. The price for it`s carb is 18USD, please let me know which way you prefer to deliver .Thank you !
His fingers never leave the needle. Video is chopped up. My guess engine kept dying so he simply edited the video to delete out the parts where the engine died. Sound awful in the video as is. This is a good video to warn you to stay away from this engine. I'm desperate to buy a gasoline engine under 10cc but this video defintily will make me wait.
It doesn't sound very good, no, and the quoted power numbers aren't all that nice either. Claims it has the power of a .46 nitro, but it only quotes 1.2hp @ 13,000RPM. OS 46AX pushes 1.6 at up to 17,000 RPM if you prop it right. And that's on standard 15% plane fuel. Put 20% car fuel and a head shim on a 46AX and you're getting 15k RPM on a 10x5x3 prop. I'll stick to glow for now. And if I did want to go towards gas, OS makes a glow plug that ignites standard gas/oil mix. Fucking wizards working for that company I swear. But yaeh if I'm desperate to run gasoline in my NexSTAR I'll just throw one of those glow plugs in the 46AX, re-shim as needed to get compression where it should be, and tighten the mixture needles in until it runs right on gasoline.
Nice tuning ,ive lost my high speed needle, would you know were to get replacement ive tried everywhere thanks
Do these engines leave an oily mess?
You don't seemed to have used the supplied fuel Pump how did you manage the fuel system
Preciso do saite da walbro motores, para ver se consigo reparo DE CARBURADOR para o motor
NGH GT 9
Look at 2:40, the muffler is melting the insulation under the mesh shielding.
Anyway, I have one of these an it works perfectly. I have in installed in a Kangaroo Delta wing spinning a 12x6 three blade. The electronic ignitions make these small engines totally usable, easy to start, good fuel economy and fuel cost. If you want a little better quality, OS Max in getting on the small gasoline engine band wagon. They have 4 and 2 stroke gas engines but I think the smallest one is 32cc for now.
What size propellor is that ?
What is the weight of the engine?
Hi my friend, i`ve a question, how mauch is the motor torque? regards
what is your opinion on this engine do you fine it's a good engine or like a lot of people say it's garbage?
is this engine actually any good? because the reviews on hobbyking suggest that it's crap.
@FBO1104 can you link me to the video plz
Board clip: Corrected skin GT9cc the line ( Đã khắc phục nhược điễm động cơ GT9cc )
My friend has a problem with the engine, it keeps sucking in bubbles along gasoline. Anyone face the same problem?
wow .... the best idle speed?
hay do u need a pump for this engine ???
George Luhrs makes a 0.2cc, this most definitely is not the smallest gasoline engine in the worlds!
Was, now the evolution 8cc
what problem you met ? I may help you out if you like !
Hi, is it possible to ask you questions here ?
This engine seems have problem on it`s carb ! Some people replaced with a new carb killed this problem !
And Fox makes an 8.2cc...
Anyone tried these on a full size bicycle?
+Bertie Blue 9cc isn't gonna even move the tire lol.
ola um motor desse subistitui um motor 46 ou um 56
The smallest gasoline engine in the world !
Thatsnot true, the Compagnucci Mac6 is smaller with its 6,5ccm
hello, you can just buy me a carburetor in two species are not present in Vietnam I am thanking you
Yes, please e-mail me at sales@octopusrc.com
We will list the parts you required onto our store tomorrow .
Thank you !
Oi amigos, gostaria de saber quem tem o endereço da walbro para eu comprar
o reparodo carburador k10wat. Para ser colocado no motor GTH 9 CC POR NAO
CONSEGUIR NEN ALTA E NEN BAIXA ROTAÇAO NESTE MOTOR, JÁ FIZ DE TUDO
E NÃO CONSEGUI. SE ALGUEN SOUBER POR FAVOR MANDE-ME PELO IMAIL.
monteiroademar6a@gmail.com Ficarei muito grato.
Hi, I want to buy a carburetor engine gt9cc, as shown in Figure your videos. Currently carburetor engine's new gt9cc not like it, you notice this, would you please let her know you have it not, and said deposit rates to how much VietnamNGH GT9 their videos are viewed here
Hi, the shipping cost for a NGH 9cc carb through EMS express is 15USD.
Another cheaper way is ship through Hongkong Post, which cost around 4USD.
The price for it`s carb is 18USD, please let me know which way you prefer to deliver .Thank you !
His fingers never leave the needle. Video is chopped up. My guess engine kept dying so he simply edited the video to delete out the parts where the engine died. Sound awful in the video as is. This is a good video to warn you to stay away from this engine. I'm desperate to buy a gasoline engine under 10cc but this video defintily will make me wait.
These engines are rubbish.
It doesn't sound very good, no, and the quoted power numbers aren't all that nice either. Claims it has the power of a .46 nitro, but it only quotes 1.2hp @ 13,000RPM. OS 46AX pushes 1.6 at up to 17,000 RPM if you prop it right. And that's on standard 15% plane fuel. Put 20% car fuel and a head shim on a 46AX and you're getting 15k RPM on a 10x5x3 prop.
I'll stick to glow for now. And if I did want to go towards gas, OS makes a glow plug that ignites standard gas/oil mix. Fucking wizards working for that company I swear. But yaeh if I'm desperate to run gasoline in my NexSTAR I'll just throw one of those glow plugs in the 46AX, re-shim as needed to get compression where it should be, and tighten the mixture needles in until it runs right on gasoline.