Thank you, all great products. For better application next time, rinse from the bottom up. This will spread the product more evenly, and reduce the risk of streaking
Great comparison. I started with Wetcoat and then went to HydroLite and never looked back. Wetcoat didn't last as long and bead as well as HL on coated and non coated cars. I haven't tried Quickbeads, but I'll be surprised if it outperforms HL.
Can these products be used to maintain a vehicle that’s already been ceramic coated? Or are they only intended as a low-effort alternative to ceramic coating?
Hey Mason, yes they can do both purposes you mentioned. I still prefer the spray and wipe application if you're maintaining your own vehicle. Thanks for watching
Even though WetCoat Essence is the more cost effective option, being dilutable 1:5 through 1:15, I'd like to try Hydro2 Lite to see if it gives me better, longer lasting results. Great video as always!
I like when you do comparisons of 3 products on the same car in real world situations. I agree that quick beads is a really slick product. I too have noticed it struggles on lower panels ( I rinse from bottom up). White vehicles are the worst to get great footage. I just did a white work van that looked amazing in person but on camera it didn’t look like I did anything to it. Keep up the great work. Another great Canadian detailer!
Hydro2 lite was my first detailing purchase and I was highly disappointed. Didn’t make it 2 weeks. And I even applied it on a wet towel and spread it per a pro detailer I know. I just use it for wheels and front grille now.
@@Detailing_Dogma I was just getting into detailing and had a new car. Wanted to get some form of protection on it. Eventually I will do a ceramic coating. Researching to find the one I want to use
@@jfarm_1311 Hey man, I moved over the DIY coatings, really simple to install, ready to go in 1 hour in environement even rain, very slick, no high spot for the most part. I'd go with their decon system and paint prep as well. check it out bit.ly/3WyJ7R6
I use wet coat on my wheels and hydro2lite on my paint. Haven’t tried quick beads yet, but will give it a try in the near future 👍 as far as durability I’m getting maybe a month on my daily driver. This of course is driving through a couple rain storms etc etc. but as others have stated, these products are very easy to reapply so it’s not an issue. Thanks as always for the vid.
Hey John, thanks for letting me know. Looks like your process is dialed in. They're all good products and work relatively the same. Useful when time is a concern and wheels. Cheers my friend ✌️
DIY says to spray upward on the panel you are treating to push it up. I prefer to spray into the pressure washer spray to apply Quick Beads. You can also use your foam cannon to apply it then rinse it off with a spray nozzle. Thanks for showing us the test… John
Hey John, happy to have you one the channel! I thought about the procedure you are referring to but I tried to keep spreading the product too far under control. I didnt want the product to reach over the hood. Thanks man.
Hey Darphan it was not, too many complaints about white paint but carpro lasted the longest, DIY slickest feel on the paint and GYEON is a balanced of the 2. they are all top notch spray N rinse brother. Thanks for tuning in!
good products but not great for what they are. I spoke to a few chemists about this... A large portion of all the ceramic sealants can be used as a spray and rinse product delivering the same effects as these shown in the video they just don't care to sell it as a spray n rinse because applying them to dry paint produces the best results and they would rather you use it as a drying aide over a spray n rinse method..which is actually wasting tons of product.. what im curious to see is unlike other products.. can you apply wetcoat or quick beads on dry paint if the paint has absolutely no protection. ? and would it do better than a wet application. does it streak ..or is it a big mistake. ? 🤔 I use both Griots 3 in1 ceramic and TW Hybrid Graphene ceramic flex wax as a standalone base layer, a dying aide or spray n rinse. im not using a whole other product when your initial protection can be used as a topper as well.
Hey Stephen, after testing all types of sealant they arent bad in terms of durability, sometimes better than regular sealants! I only use them when time is crucial.
Hay man, a great vid as usual, I like that you often pick Gyeon and DIY lineups to test with other ones, I really like those brands, I wonder since you often use DIY Coatings how's the durability on them? Wich one u like best? The 3,5,8 year?
Hey Victor, glad you like the content. For DIY Coatings I have the 8 year but havent played with it yet. The 3 and 5 are very easy to apply, like a breeze, they all apply in the same fashion pretty much, maybe 3 year is slighty easier to avoid high spots but dont quote me on that. I have not applied them on my personal cars so I cant vouch for their durability yet. As far as the durability we'll have a test and comparison soon on the channel but we'll have to wait months to see who's doing better since im not going to throw chemicals at them but rather install coatings on a daily driver. Cheers
@@Detailing_Dogma Wow thank you very much for a detailed run down on the coatings and their application, and taking your time to anwser me, i really appreciate it! Most channels don't anwser at all or just write simple and super short without going into detail (wich is super important sometimes), your channel is quickly becoming one of my favorites! I would like to apply ,,the 8-3 stack", but it's not good price wise in my country (Poland) its over 350 Canadian dolars (for the two 3 and 8 yr), when Mohs or other coatings are around 120. I've heard good things about the ease of use of DIY coatings and their performance, i think ill try the 3 or 5 year on my daily beaten Toyota CHR, my BMW garage king has Mohs topped with Cancoat now. About the durability test i completely agree, throwing chemicals at a coating don't say much about it, only real world test!
@@victoryensured7137 Hey, your post just answered my question about where you are from 😂. I'd say go with a simple coating, the DIY 3 or MOHS are good, DIY is probably easier and faster to apply though. I've done a lot of MOHS evo in the past it's good robust stuff. But yeah keep it simple I'd say i just applied Pure EVO on my hood after the touch ups about 1 month ago and a bird poo already stained it, I've to sand and compound that area, I had to leave the car outside for about 8 hours, the bird dropping baked in the sun, it's etched. This is why I dont think its always worth it to go with the most durable stuff. Like happens we have to redo coating all the time. And thank you for your appreciation my friend, I work my audience im here for you.
@@Detailing_Dogma A VERY valid point about redoing a spot and the durability, man i hate two things - water spots and bird bombs, they add SOO much work for me it's crazy and im not a pro - im just a prosumer let's say.. I have an etched bird poo spot on my roof of the Toyota and man i didn't see it for some time, it baked and i think i need to sand it too, its not even an outline etching - its a WHOLE POO (with the white residue) that is etched, it feels like sandpaper when i run my hand over it, i fear it might be down to primer - and it's over freshly applied Cancoat Evo, i feel your pain. I love ,,smaller" chanels like yours :)
@@victoryensured7137 thank you man, appreciate you. Get some foam backed sanding paper, try a dozen wet sand passes with 3000, but alot of time 2000 grit would required. depends right. Then polish off, Get it done otherwise by a pro, don't let this sink down too long.
Thanks for the feedback. Still a work in progress, the new content is more crips as I learn from my mistake, also invested a in Sony Alpha DSLR. Cheers man
Je rinse toujours les spray and rinse de bas en haut pour activerle produit et enmeme tempsle faire monter pour qu'il repassesur les surface en descendant. Quickbeeds vas vraiment bien. En plusil contient du graphen ce qui aide à éviterl es waterspot.
@@Detailing_Dogma ma bouteille de Quick beads est presque fini. J'utilise aussi Beneficia de Labocosmetica. Solide produit aussi pour un Spray and rinse. Tu l'esserras. J'ai une bouteille 1L. La dilution d'été c'est du 1:1 alors sa te donne deux belle bouteille de 1L dans un IK sprayer. Je te conceil les bouteilles IK sprayer sont malade. Super qualité, pas trop cher, durable et le sprayer est smooth.
all these spray n rinse products are terrible and are waste. they don't last. Just use a ceramic detail spray as a drying aide knock out 2 steps in one. no need to re coat car with half a bottle of product and then rinse product onto the floor down the drain lol. I'm a detailer. there's no bigger gimmick than this stuff. don't be lazy don't waste product which is exactly what you do with spray n rinse stuff you have to dry the car anyway just use any ceramic spray on the wet paint and then dry with drying towel.
Hey Stephen I mostly agree, thank you for the feedback btw. They still have their place for a quick sealant and then blow off with a blower, you can touch up with a towel slighty and good to go. Unfortunately many DIYers love those for the ease of use but im like you a prefer a true spray detailer.
✅ Products Used In This Video ✅ Use Code ''DOGMA''
☞ 🇺🇸USA
DIY Clay Towel bit.ly/4ekJZ1R
DIY Quick Beads bit.ly/3XMKzQs
GYEON Wet Coat : tinyurl.com/wetcoat
CARPRO Hydro2 : tinyurl.com/5n82by8d
☞🇨🇦Canada
DIY Clay Towel tinyurl.com/ycaax25d
DIY Quick Beads tinyurl.com/3jtyu5tz
GYEON Wet Coat : tinyurl.com/wetcoat
CARPRO Hydro2 : tinyurl.com/5n82by8d
=======================================================
🔥 Save 5% on CARZILLA Use Code: "DOGMA" ☞ carzilla.ca/?ref=dogma
🇺🇸 USA 🇨🇦 Canada FREE Shipping [High End Detailing Products]
=======================================================
🧽 SAVE 10% on DIY DETAIL Products 🇺🇸 bit.ly/3WyJ7R6
Use Code ''DOGMA'' to save $$
=======================================================
🧤 SAVE 10% on ARMOUR DETAIL Supplies 🇺🇸 armourdetailsupply.com/?ref=d...
Use Code ''DOGMA'' to Save $$
=======================================================
Thank you, all great products. For better application next time, rinse from the bottom up. This will spread the product more evenly, and reduce the risk of streaking
Ok next time 🙂
Thank you DIY! I did think about that, wanted to minimize the spreading of the sealant on other panels. ✌️
On a white car can’t see anything😦
@@amychic3352 i see everything
AHAA!
Great comparison. I started with Wetcoat and then went to HydroLite and never looked back. Wetcoat didn't last as long and bead as well as HL on coated and non coated cars. I haven't tried Quickbeads, but I'll be surprised if it outperforms HL.
thx tuning in as usual ruebarb. We'll see next month but i'm surprised they seem to outperform the regular spray and wipe. More testing to come cheers
The best part about these products are as soon as you notice them no working great you can spot top up easy as
excellent point Clint ✌️ cheers my friend.
Can these products be used to maintain a vehicle that’s already been ceramic coated? Or are they only intended as a low-effort alternative to ceramic coating?
Hey Mason, yes they can do both purposes you mentioned. I still prefer the spray and wipe application if you're maintaining your own vehicle. Thanks for watching
Even though WetCoat Essence is the more cost effective option, being dilutable 1:5 through 1:15, I'd like to try Hydro2 Lite to see if it gives me better, longer lasting results. Great video as always!
Thank you Rowland, stay tuned for the update! Appreciate you
I like when you do comparisons of 3 products on the same car in real world situations.
I agree that quick beads is a really slick product. I too have noticed it struggles on lower panels ( I rinse from bottom up).
White vehicles are the worst to get great footage. I just did a white work van that looked amazing in person but on camera it didn’t look like I did anything to it.
Keep up the great work. Another great Canadian detailer!
Thank you Steve, appreciate your support brother ✌️
Hydro2 lite was my first detailing purchase and I was highly disappointed. Didn’t make it 2 weeks. And I even applied it on a wet towel and spread it per a pro detailer I know. I just use it for wheels and front grille now.
Hey man, I dont personally rely on those for paint protection too for the most part. They're a great alternative. Cheers
@@Detailing_Dogma I was just getting into detailing and had a new car. Wanted to get some form of protection on it. Eventually I will do a ceramic coating. Researching to find the one I want to use
@@jfarm_1311 Hey man, I moved over the DIY coatings, really simple to install, ready to go in 1 hour in environement even rain, very slick, no high spot for the most part. I'd go with their decon system and paint prep as well. check it out bit.ly/3WyJ7R6
@@Detailing_Dogma they are on the list of ones I’m looking into
Me too... Kosh chemie protector wax is way more cost effective
Buy the Full Griots Garage line up and make videos on those products!!
Thanks for the request. Hopefully we can get those at some point! ✌️
I use wet coat on my wheels and hydro2lite on my paint. Haven’t tried quick beads yet, but will give it a try in the near future 👍 as far as durability I’m getting maybe a month on my daily driver. This of course is driving through a couple rain storms etc etc. but as others have stated, these products are very easy to reapply so it’s not an issue. Thanks as always for the vid.
Hey John, thanks for letting me know. Looks like your process is dialed in. They're all good products and work relatively the same. Useful when time is a concern and wheels. Cheers my friend ✌️
why wet coat on the wheels?
DIY says to spray upward on the panel you are treating to push it up. I prefer to spray into the pressure washer spray to apply Quick Beads. You can also use your foam cannon to apply it then rinse it off with a spray nozzle. Thanks for showing us the test… John
Hey John, happy to have you one the channel! I thought about the procedure you are referring to but I tried to keep spreading the product too far under control. I didnt want the product to reach over the hood. Thanks man.
@@Detailing_Dogma You presented the info very well. Thanks again… John
@@shooterjohn7163 Thank you! the best soap video is coming this week-end. Talk soon
@@Detailing_Dogma 👍
try koch chemie protector wax or hydro foam sealant
Thanks for the feedback!
Protector wax is awesome my friend 👍👍
Keep 'em comin' Frank!
Thank you Rob, appreciate your support my friend ✌️
was the Next update posted ?
Hey Darphan it was not, too many complaints about white paint but carpro lasted the longest, DIY slickest feel on the paint and GYEON is a balanced of the 2. they are all top notch spray N rinse brother. Thanks for tuning in!
Be interesting to see how these compare to Mckees hydro blue and hydro graphene.
Hey man thanks for chiming in, hopefully we test those down the road!! cheers
good products but not great for what they are. I spoke to a few chemists about this... A large portion of all the ceramic sealants can be used as a spray and rinse product delivering the same effects as these shown in the video they just don't care to sell it as a spray n rinse because applying them to dry paint produces the best results and they would rather you use it as a drying aide over a spray n rinse method..which is actually wasting tons of product.. what im curious to see is unlike other products.. can you apply wetcoat or quick beads on dry paint if the paint has absolutely no protection. ? and would it do better than a wet application. does it streak ..or is it a big mistake. ? 🤔
I use both Griots 3 in1 ceramic and TW Hybrid Graphene ceramic flex wax as a standalone base layer, a dying aide or spray n rinse. im not using a whole other product when your initial protection can be used as a topper as well.
Hey Stephen, after testing all types of sealant they arent bad in terms of durability, sometimes better than regular sealants! I only use them when time is crucial.
What about Autoglym polar seal
Hay man, a great vid as usual, I like that you often pick Gyeon and DIY lineups to test with other ones, I really like those brands, I wonder since you often use DIY Coatings how's the durability on them? Wich one u like best? The 3,5,8 year?
Hey Victor, glad you like the content. For DIY Coatings I have the 8 year but havent played with it yet. The 3 and 5 are very easy to apply, like a breeze, they all apply in the same fashion pretty much, maybe 3 year is slighty easier to avoid high spots but dont quote me on that. I have not applied them on my personal cars so I cant vouch for their durability yet. As far as the durability we'll have a test and comparison soon on the channel but we'll have to wait months to see who's doing better since im not going to throw chemicals at them but rather install coatings on a daily driver. Cheers
@@Detailing_Dogma Wow thank you very much for a detailed run down on the coatings and their application, and taking your time to anwser me, i really appreciate it! Most channels don't anwser at all or just write simple and super short without going into detail (wich is super important sometimes), your channel is quickly becoming one of my favorites! I would like to apply ,,the 8-3 stack", but it's not good price wise in my country (Poland) its over 350 Canadian dolars (for the two 3 and 8 yr), when Mohs or
other coatings are around 120. I've heard good things about the ease of use of DIY coatings and their performance, i think ill try the 3 or 5 year on my daily beaten Toyota CHR, my BMW garage king has Mohs topped with Cancoat now. About the durability test i completely agree, throwing chemicals at a coating don't say much about it, only real world test!
@@victoryensured7137 Hey, your post just answered my question about where you are from 😂. I'd say go with a simple coating, the DIY 3 or MOHS are good, DIY is probably easier and faster to apply though. I've done a lot of MOHS evo in the past it's good robust stuff. But yeah keep it simple I'd say i just applied Pure EVO on my hood after the touch ups about 1 month ago and a bird poo already stained it, I've to sand and compound that area, I had to leave the car outside for about 8 hours, the bird dropping baked in the sun, it's etched. This is why I dont think its always worth it to go with the most durable stuff. Like happens we have to redo coating all the time. And thank you for your appreciation my friend, I work my audience im here for you.
@@Detailing_Dogma A VERY valid point about redoing a spot and the durability, man i hate two things - water spots and bird bombs, they add SOO much work for me it's crazy and im not a pro - im just a prosumer let's say.. I have an etched bird poo spot on my roof of the Toyota and man i didn't see it for some time, it baked and i think i need to sand it too, its not even an outline etching - its a WHOLE POO (with the white residue) that is etched, it feels like sandpaper when i run my hand over it, i fear it might be down to primer - and it's over freshly applied Cancoat Evo, i feel your pain. I love ,,smaller" chanels like yours :)
@@victoryensured7137 thank you man, appreciate you. Get some foam backed sanding paper, try a dozen wet sand passes with 3000, but alot of time 2000 grit would required. depends right. Then polish off, Get it done otherwise by a pro, don't let this sink down too long.
Awesome video! Keep up the good work. Your videos are great. All 3 products look like they work good. Have a good day/night.🤜🤛
Thank you Mario you're the best!
Imho your missing the best one. Pure:est P1 or pure:est P2. Check them out
This stuff is interesting! Hopefully I can get my hands on it down the road, cheers dude ✌️
Great job
But White panel under the sun , actually I can’t see the water behavior 😅
Thanks for the feedback. Still a work in progress, the new content is more crips as I learn from my mistake, also invested a in Sony Alpha DSLR. Cheers man
Haha that's a very good one. Maybe on next April 1st for our Dawn Friends! cheer man thank you
Merci pour ces vidéos comparatifs
Merci pour ton support! ✌️
wait, u mean she grab ur right ball or ur left ball (her right side)
You'd like some of that too don't ya
McKee’s Hydro Blue … get it
Je rinse toujours les spray and rinse de bas en haut pour activerle produit et enmeme tempsle faire monter pour qu'il repassesur les surface en descendant. Quickbeeds vas vraiment bien. En plusil contient du graphen ce qui aide à éviterl es waterspot.
Bonne méthode! content de savoir que tu aime beaucoup Quick Beads
@@Detailing_Dogma ma bouteille de Quick beads est presque fini. J'utilise aussi Beneficia de Labocosmetica. Solide produit aussi pour un Spray and rinse. Tu l'esserras. J'ai une bouteille 1L. La dilution d'été c'est du 1:1 alors sa te donne deux belle bouteille de 1L dans un IK sprayer. Je te conceil les bouteilles IK sprayer sont malade. Super qualité, pas trop cher, durable et le sprayer est smooth.
Thanks
thanks for watching!
Gyeon 💪🏻👌
✌️
Gyeon brand is sooo cool, i love it
Can’t see a thing bro lol sorry. But I trust you!
Hey jefferson sorry my friend, next update will be inside most likely or shade. Try watch on TV or Laptop
It's really hard to see anything on the hood of a white car in the sun.
DIY better do well if not I'm gone be upset at the end of the clip
all these spray n rinse products are terrible and are waste. they don't last. Just use a ceramic detail spray as a drying aide knock out 2 steps in one. no need to re coat car with half a bottle of product and then rinse product onto the floor down the drain lol. I'm a detailer. there's no bigger gimmick than this stuff. don't be lazy don't waste product which is exactly what you do with spray n rinse stuff you have to dry the car anyway just use any ceramic spray on the wet paint and then dry with drying towel.
Hey Stephen I mostly agree, thank you for the feedback btw. They still have their place for a quick sealant and then blow off with a blower, you can touch up with a towel slighty and good to go. Unfortunately many DIYers love those for the ease of use but im like you a prefer a true spray detailer.
Sorry bro but Didn't like the Camera Quality... Video is good but Camera quality 😐
Sorry, we'll do better next time. Still learning everyday. Try TV or Laptop. Cheers my friend ✌️
Video is not good to see some difference bro
stay tuned for the update, sorry if that did not work for you in this one. Thanks for watching.
🇨🇦👍👍
appreciate you Eric! ✌️
Yeah just skip all this non-sense and use Tech 582 as a drying aid. Just as quick, cheaper, better, proven
ok brother, thanks for the feedback
Horrible colour vehicle to use for this scenario
stay tuned for the update, sorry if that did not work for you in this one. Thanks for watching.
First!!!!!!
🥇
✌️ 🤣
Just saw the vid from pan you guys nailed it!!! I prefer the all in one. 🫡🙏
Thank you John, appreciate your support. Glad you liked it. cya