Hey mat I got a quick question I don't know if you're going to be able to help me but when you put the left cover back on and there's a hydraulic transport Dow pipe thing that goes to the remotes it's right next to the sector valve did you put new O-rings on it and if you did did you put the flat o-ring under the gasket I think there's two O-rings that go on that little pipe and a flat O ring that goes around it??
@@MattTheWelder yes test it for flow and pressure. My 3 point link works but the loader is very slow to respond and so want to start by testing the pump and then work back from there. Next I thought to test the aux service control valve knob and then the 2 hydralic levers to control the loader was my thinking.
@@warrenpfo you’d have to plum a removable psi gauge in somewhere to see exactly what your pump is putting out. It’s a common complaint through on older fords that the loader is slow.
@@MattTheWelder cheers Matt let me see what I can do. By slow I mean sometimes 5 plus seconds to respond to a lever being pulled and help to lift or lower, tilt or tip the bucket. I plan on replacing the filter and cleaning the screen next weekend to start and will report back
Hermano saludos desde Venezuela me llamo Carlos Castro tengo un problemita con un tractor Ford 7600 año 1985 estoy adaptando un sistema hidráulico original de otro tractor similar q lo trajeron horiginal obvio pero no me da presión q tengo q condenar por q la bomba tiene su precion normal
FORD IS GOLD 💪👌👍 SIMPLY THE BEST 💪👍❤️
I have 3 ford 8ns they’re my favorites.
How to disassemble Ford 7840 new holland hidrolic lift cover
Hey mat I got a quick question I don't know if you're going to be able to help me but when you put the left cover back on and there's a hydraulic transport Dow pipe thing that goes to the remotes it's right next to the sector valve did you put new O-rings on it and if you did did you put the flat o-ring under the gasket I think there's two O-rings that go on that little pipe and a flat O ring that goes around it??
Thanks mate I got same problem 👍
I have a 4500 and the controls won’t stay in position. Any ideas?
Hey Matt any idea on how yo rest the hydralic pump of a 7610 for pressure and flow. I appreciate the help.
You mean test that the pump is working?
@@MattTheWelder yes test it for flow and pressure. My 3 point link works but the loader is very slow to respond and so want to start by testing the pump and then work back from there. Next I thought to test the aux service control valve knob and then the 2 hydralic levers to control the loader was my thinking.
@@warrenpfo you’d have to plum a removable psi gauge in somewhere to see exactly what your pump is putting out. It’s a common complaint through on older fords that the loader is slow.
@@MattTheWelder cheers Matt let me see what I can do. By slow I mean sometimes 5 plus seconds to respond to a lever being pulled and help to lift or lower, tilt or tip the bucket. I plan on replacing the filter and cleaning the screen next weekend to start and will report back
@@warrenpfoI have the same problem on my 7600 now. What did you figure out?
Ford lovers from Punjab state India
Sir do I know the cost for power steering if we do modifications in ford 3600 tractor over there.
Levers of my ford 5000 won’t go up or down, what can be the problem
When you say levers you mean the lift arms or the lever that makes the hydraulic arms lift up?
Hermano saludos desde Venezuela me llamo Carlos Castro tengo un problemita con un tractor Ford 7600 año 1985 estoy adaptando un sistema hidráulico original de otro tractor similar q lo trajeron horiginal obvio pero no me da presión q tengo q condenar por q la bomba tiene su precion normal
TH-cam took away the translate feature. I’m unable to decipher this. 😔
Unload valve 👍
I’ve lost count of how many I’ve done
now I'm really confused....what a waste of time ! 23 minutes of un-screwing
Podrían traducirlo a español x favor
If I could speak Spanish I would, is there a way for you to turn on subtitles in Spanish?