If you removed material then you probably compromised the product. This kit is engineered with close tolerances to prevent water damage. they're specifically made to be press fit in place and sealed.
Hi, I'm asking you folks again: @truthhurts228 2 months ago Can these be wired directly to the turn signal wires on the inlet lights? I'd rather do that then tie into the headlight wires. Thanks! 2021 Challenger Scat Pack Shaker widebody with 2 open inner ram air light openings. Thx. Bill
If you’re referring to factory inlet tube wiring for illuminated inlets, those connections are DRL only. Not turn signals. All connections are made on the headlight harness by supplied positap connectors. No cutting or splicing is required.
![ไข้ขึ้นเลย! เมื่อแฝดโดนจัดเต็มวัคซีนครบ2เดือน🤒 [cc] แดนแพทตี้ SS2 | EP.54 |](http://i.ytimg.com/vi/z2VHItnyyvY/mqdefault.jpg)
Do these fit for the newer headlights for the 2008-2014 with the removable caps on the headlights
Can these be wired directly to the turn signal wires ? I'd rather do that then tie into the headlight wires. Thanks!
I installed the lighting in my 2021 Challenger. Had to grind a bit to get them to fit. The result is impressive. 👍. Greetings from Bavaria.
If you removed material then you probably compromised the product. This kit is engineered with close tolerances to prevent water damage. they're specifically made to be press fit in place and sealed.
Can you engrave kermit heads?
Hi, I'm asking you folks again: @truthhurts228
2 months ago
Can these be wired directly to the turn signal wires on the inlet lights? I'd rather do that then tie into the headlight wires. Thanks! 2021 Challenger Scat Pack Shaker widebody with 2 open inner ram air light openings. Thx. Bill
If you’re referring to factory inlet tube wiring for illuminated inlets, those connections are DRL only. Not turn signals. All connections are made on the headlight harness by supplied positap connectors. No cutting or splicing is required.
I have a 2021 scat pack with the factory illuminated tubes. Are these sized to fit inside the currently installed factory ones?