Kia Sorento 2,5 Crdi D4CB How to change Cam Cradle , Camshafts , Timing Chain (Part 2)
ฝัง
- เผยแพร่เมื่อ 20 ส.ค. 2019
- Na videu je druhá část postupu výměny uložení vačkových hřídelí, vaček a nastavení horního rozvodového řetězu na Kia Sorento 2,5 Crdi 125 kw. Postup je stejný i když potřebujete vměnit hydraulická zvedátka nebo vahadla.
- ยานยนต์และพาหนะ
First video where I can see how the camshaft gear screws were tightened. Thank's.🤝
clean and accurate service, congratulations!
good job. you are the most top self-maintenance guy.
Thank you
Thats, why i love to be a mechanic. No hightec-workplace. Just know-how and absolut heart for the things, thats got do be done. Respect!!! Btw, i own the same Kia, and i love it. A dream for every mechanic, who's able to repair things at it's own! 😎
A mi me complico el tema de la conecciones a la inyectores la parte eléctrica quiero saber si traen alguna marca los conectores a los inyectores
Супер видео очень понятно ...красавчик
hello, thank you for your time to make this videos! subscribed!
Hello, thank you
MUY BUEN VÍDEO GRACIAS
very good my brother
Süper Video Tesekkürler
Thanks You míster
Bravoooooo
👏👏
Jestli vám video pomohlo přidejte se k odběru. Subscribe :)
Workoholik hey whats the ckp sensor location on this engine thanks
Is good video
Multumesc!
Eu só mecânico industrial mais gosto de reparar motor de viaturas. Sendo assim quero aulas d reparação de um motor completo de qualquer marca, modelos. Viaturas antigas e modernas.
Support us and subscribe.Thanks
Tope. Godeimuto
👍🇵🇱😀
I just got a sorento 2008 2.5 diesel
I'll be waiting for every video you'll post.
Please make video changing abs sensors and also how can i know if my engine mounts are bad?
I feel how the car twist when i shift from P to R or from R to D.
Hi, abs sensors sometimes don't go out. But I'll try
@@Workoholik hi where buy this part in Sorento 2008?
Hi, ok
Any symptoms before replacing this part
Does the injector pump, have a key
Super video díky za něj. Proč se vačky zadírají? Špatné mazání?
Zdravím. Ja mám problém,že mi tečie olej okolo toho veka horneho alebo ako sa to volá a aj okolo tej prednej ciernej casti kde su rozvody.viete poradit v com by mohol byt problem?tesnenie alebo co?
La tapa negra. (Tapa válvulas no la cubres con silicona o algún sellado antes de poner en el motor ??
Saludos desde chile
i ask who supplied the engine, what manufacturer, is it the engine you are working on is the Kia Sorento, 2.5 CRDI, D4CB, with 140 HP ??? My question on this, at that time Kia did not build its own engines, but very often they were so called "licensed buildings". Say, the engine manufacturer, it was for this engine, or the other way around, he asked what engine license is this engine, by which manufacturer and in which part of the engine's outer casing, that is, somewhere on the engine block, it is closed? See and can you read that? ... Thank you very much for your answer.
How km is that problem with Cam Cradle?
Sir bagong overhaul ung crdi 2002 starex hardstarting pgpaamuyan ng gasolina umaandar nmn ano kya problema
Why did you have to replace the Cam cradle? Ive just purchased a hyundai with one of these engines. Thanks
Hi, the cam cradle had deep grooves. When you email me, I'll send you photos. My email is delejsisam@gmail.com
@Workoholik can I see this ? Groves
what torque is it for those injectors? I've searched everywhere. I ended up torqueing mine to 35Nm of a M8 12.9 screw chart. But that might be all wrong. The design for tightening down those injectors are so ridiculous bad on this engine. I mean, a screw pressing down on a fork which stands on a dovel and then forces the injector down on a relatively big surface area on that cupper seal washer in the bottom. It's doomed to fail, and no wonder it's the most common problem on the cars with this engine. Anyway, I added new seal washers after first resurfacing with an injector seat "reaming" tool.
I also had to change a leaky intercooler and need to replace the turbo for a new one. And the injector seals was leaky. So I could say that my starex had all of those common problems with this engine which would lead to engine death if not adressed. I programmed the EGR valve shut, and will block that passage, and also add an oil catch can. And probably strip and clean out the intake manifold. And a engine flush with diesel, and a washing compound and some tight oil changes. Then it might act like a car again. I suspect that the EGR is a little bit open now. Because I cant feel the 200 Hp (tuned at a tuning comany)
Hi, they write 27.5 - 33.3 Nm for the new cam cradle. But carefully, it's screw into aluminum.
Kolko Nm sa majú dotiahnuť tie M6ky srouby na domcoch???
when tension the cam shaft cogs, you have 93.76-117.7( 68.7-86.7) why the different values?
68.7-86.7 it is lbf.ft
Молодец на колене что называется сделал
3:23
Доброго здоров'я. Все ж таки, з яким моментом потрібно затягувати зірочки розподільчих валів? Чому у Вас вказано два діапазони крутного моменту?
Votre montage et votre couple de serrage convient pour Sorento 2,5 crdi de 2004?
oui c'est pareil
Amigo não sei se vai me entender mais vi que quebraram 2 correntes nesse carro uma pergunta vc retiro o cabeçote pra ver se ouve empeno nas válvulas ?
I'm sorry but I don't understand the question
@@Workoholik Did you check the valves before assembling?
El camarografo como las pelotas XD
Hola .ese motor trae enfriador de aceite
Na videu je druhá část postupu výměny uložení vačkových hřídelí, vaček a nastavení horního rozvodového řetězu na Kia Sorento 2,5 Crdi 125 kw. Postup je stejný i když potřebujete vměnit hydraulická zvedátka nebo vahadla.
tengo una kia sorento 2009 y sopla mucho por el deposito por donde se suministra el aceite, y le he cambiado los aros de asiento de los inyectores y persiste el problema, debo cambiar toda la pieza de aluminio que usted remplazo?
Cuánto es 10,1 o. 11,6. En pies libra
Hola me parece fenomenal el trabajo pero no as explicado nada de lo que as hecho
Постель мажешь масло с циатимом 50на 50. А зачем менял постель то?
Ahoj.Přidejte se do skupiny Kia Sorento 2002-2009 technická poradna
na facebooku
facebook.com/groups/693397697754618/
Цепь тоже Китай? На оригинал не похожа.
Oye Amigo. ese trabajo está mal echo, espero que no quede con fugas de aceite.
الفيديو غير واظح
Ahoj prečo si menil ale ten držiak vačkovej hriadele? Boli tam nejaké vôle?
Ahoj, to uložení vaček jsem měnil, protože bylo vydřený a byly drážky i ve vačkách. Když se to nechá tak se to pomalu přidírá až se to zadře. A když se spodek točí lehce na klice a vrch už na vačkách nemůže tak se přerve horní řetěz a potká se to.
@@Workoholik ok ďakujem za info
A hydroštely si nechal pôvodne alebo sú nové?
@@hbrobi8352 hydroštely tam byly nový
send me the old one..hahahahah
Kya problem thi isme
MIRRA AMIGO NO SE NI VEO QUE PAIS EL VIDEO NO VEO QUE HACES NO PONES EL FRENTE Y MENOS LO QUE HACES
И зачем это надо?
Потому что подшипники и распределительные валы имеют канавки
@@Workoholik дешевле поправить постель. Чем китайскую ставить
Ввертыши сделать!
Sin audio explicativo no sirve de mucho