We have brand new MCM Garage Flags for you to hand in your own garage! Only $16 - LIMITED TIME ONLY mightycarmods.com/collections/accessories/products/mighty-car-mods-garage-banner
thepro08 Its rice in the sense its a hardware store mod. Not hating who hasn't done it. Grabbed a mesh gutter strainer from HD today to filter a custom air duct lol
For mothers day, I just went out into the garage (mum and dad are out for dinner) and I did this to my mum's new White Mercedes C63, Gee, is she gonna get a surprise tomorrow!!! Can't WAIT to see how happy she is!! WOOHOO!!!
back in an age lost to the mists of time we used the same kind of material to add lips to thfenders of our 4X4's to cover the big wheels the stuff available here in the states then and now has a round tube top kind of like if you glued a garden hose to one side of the material you used. It helped keep the "flares" stiff, especially when we used the 6 inch stuff
Now we need some DIY over-fenders, haha! Maybe we can use the same gardening-edging... Tryna' think of how you can get it to hold a slight bulge on top of the natural bend of a fender over the wheel...
+Violetta I think it would need some cuts going vertical along the edging allowing it to fold over itself. Wouldn't it be cool to do that and then plasti-weld it to hold its shape?
If you guys did this full time I would watch the shit out of it You two have that chemistry that jeremy james and richard had that makes the show so entertaining. Considering how little time you two have and the comparable budget I'm so impressed and entertained every time and always want more. Look forward to where the show goes and cant give higher praise
I just did this to my 96 Ram a few weeks ago! Lol. I used 4" vinyl floor base tho (used commercially) bc I couldn't find edging like this. "lowered" my truck 3" (my truck actually had a 1" tab built into the body along the whole side, and had a 3" chin spoiler on the factory bumper. Truck is lowered 2"/4" for now until I can afford those expensive $400 spindles and also a low profile transmission crossmember and a 1 piece aluminum driveshaft to eliminate the carrier bearing and its crossmember (weight reduction!), but this gets my truck 3" lower, aerodynamically speaking, to the ground, to help keep air out from under the truck, reducing turbulence & drag (reduces vibration slightly at highway speeds), as well as slightly lower air noise inside the cabin at highway speeds too. Great mod to do!
found this one on the interwebs. Looking at how far you gents have come is awesome. Also...one thing for sure, Marty has definitely adapted to your dry dad jokes @mook. I love boring dry jokes lol🤣
I used the same type of edging for my Jeep Wrangler for temporary fender flare extensions. I used zip ties to hold it on. My girlfriend hated it so I liked it that much more.
If you want to get rid of the 'white/grey' edge on dark colored cut plastic, a quick blast from a heat gun with a small nozzle will re-melt just the edge and turn it 'mostly' back to black. Works well on ABS as well. Just don't overcook it. For best results, get an adjustable heat gun (such as those used for electronics work) and set your temp just above the melting point of the plastic you're up against.
Ground effects and spoilers do work otherwise you wouldn't see them used so much in racing. A front air dam doesn't work at slower velocities, but get in the zone and that all changes.
If you get a wider one, you can fold it over on itself, and then it will not just be vertical but also slanted outwards a bit, which will look cooler and might actually do a little to help aero.
same stuff here has about 1/2" round tube at the top, would look good with the tube at the bottom edge. it can help some cars to not get blown around as much by wind just for keeping some air out from underneath.
This is sweet. I did this to my S13 Silvia years ago. The edging I used was almost a rubber kind of thing. Also, I ended up blacking my rivet heads out too. I didn't like the silver look.
love it one time i did it out of house sideing and made side skirts on my car people couldnt believe what it was lol ..looked great too was a left over from a job so free ...
The Garden-lip is actually used ALOT on Ecomoders to keep air from entering beneath the car. Usually they see a 5% increase on MPG with a lip installed. So its actually doing something.
This will give some "ground affects" by giving a place for a low pressure to build, somewhat. I would recommend putting washers on the rivets. A small area like that will split the plastic from air pressures and vibration while driving. Rivet washers can be bought or stainless washers for bolts the same size as the rivet shaft.
Sweet other Lefty man that means that you get to Lefty it in there now doesn't it right now I drive a Toyota Celica GTS 2000 edition and lover working on learning the whole entire engine so I can do all the work myself save me money and gives me a sense of Pride and ownership with my vehicle thank you guys so much for what you do keep it Rockin and stay fly Like You Are
+sako76 They already have raced them, they just haven't released the video of it yet. That video of them at the most recent MCM event showed them racing both cars down the quarter.
Taken over by frogs he says !!!!!!!! LMFAOOOOOOOOOOOOOOOOOOOOO. I'm at work looking quite silly right now laughing so much. And I can't tell anyone why I'm laughing because I'm laughing at the ill dad joke lmao
Two tips for riveting: 1.) If you have to rivet many rivets or often, buy an air riveter. You'll never want to rivet without one. 2.) If you want to have permanent black rivets, just buy black ones...
Thank you guys for your videos. Still cant wait for next episodes. I like all your episodes, those funny/silly - they(you) make me laught my ass of. Those epsiodes like supergramps are interesting, love them, but I dont have the money(time) to acomplish such project. You should do definitely what makes you happy because it will make happy and inspire all reasonable human beeings. And remember: haters gonna hate, there is no video on youtube, that does not have dislikes. You are legends!
Did you think of putting a little bit more strenght into the front of the bumper? Maybe a couple of little brackets. Because at motorway speeds the air might push on the garden edging and try to pull towards the ground on the lower part of the bumper which is weakened by the massive cut for the intercooler. If you make the brackets in such a way that the strained piece of metal would be strained lenghtwise, you'll probably get away with a very light(therefore cheap, wich certainly doesn't hurt a thing) and effective bracket.
i did this a few years back, lasted about a month with cable ties alone, they ended up cutting through them, next i went to clark rubber and got some 4x4 wheel guard trim, only downfall is its heavy and strong, so i parked too close twice and it fell off, now wanting a legit one so it lasts, still was fun though XD
you can also use (more expensive) threaded inserts that are ribits that is hallow & threaded in the center allowing for that ribbit size bolt to be fastened & taken off later ect I always use ribits in the car audio world .... great video man! (from Mesa,AZ USA)
Good to see you guys are getting back to what the channel started as... although I really enjoy watching everything you produce! Keep up the great work!
Those lips actually help with aerodynamics. It helps to lessen the turbulence with the undercarriage. That is why many newer cars have full skid-plates.
You could do some coast down tests, before and after, to see if you got any improvement (i.e. drag reduction). But then, you'd have to remove it all again...
coworker of mine did that to his '07 subaru legacy sedan. Looked so clean the dealership didnt notice when he traded it in lol
totally believable story
Should have left the "Garden Edge" sticker on!
Yep
Fuck yes
+mateus clepf Sponsored
+mateus clepf thats the first thing i thought when i saw it on the side
i thought so too.. because racecar!! :)
We have brand new MCM Garage Flags for you to hand in your own garage! Only $16 - LIMITED TIME ONLY
mightycarmods.com/collections/accessories/products/mighty-car-mods-garage-banner
It's been forever since you guys posted!
yay
+Mighty Car Mods Flag ordered, I'll try get it on uk tv at Glastonbury!
+Mighty Car Mods legit! so affordable
+Mighty Car Mods i didn't even know about the flags till yesterday, but i'm going wave that flag with pride! hahaha and then pin it up in my room...
You should try making some window louvers out of the garden edging.
NO THE SECRET IS OUT! NOW THEY'RE GOING TO MARK UP THE PRICE OF GARDEN EDGING!
broccoli_assassin lol
broccoli_assassin that’s exactly what they did 😂
@@LuxxyHD $60-80 now 😂😭
MCM at its best. DIY cheap ricer-ish mods!
+Beruka rivet rivet rivet
+Beruka why is it rice, if racing teams do the same? the only think ricy is alot of people being noobs and haters...
....
thepro08
Its rice in the sense its a hardware store mod. Not hating who hasn't done it. Grabbed a mesh gutter strainer from HD today to filter a custom air duct lol
+thepro08 stfu
+thepro08 Lol, that's the definition of rice really. Imitating race cars with something that is clearly not a race car.
"the frogs are taking over man, there's just rivet rivet everywhere you go"
What a riveting episode
Oh good on you! hahahahahahah love it
Puns man
Good pun haha
For mothers day, I just went out into the garage (mum and dad are out for dinner) and I did this to my mum's new White Mercedes C63, Gee, is she gonna get a surprise tomorrow!!! Can't WAIT to see how happy she is!! WOOHOO!!!
I love this series! Very old school MCM! In fact, I'm going to go watch some of your older stuff after this.
I don't know what it is, but Marty and Moog are absolutely riveting in this episode.
Heya Does Wasaabi have a boost leak???
Look at the gap in silicone Hose going to Intercooler @ Time code 06:05 onwards right hand connection
cool
+Ben Jay Wasn't there a lip on the piping?
+xmxoo7 why is a boost leak cool?
+Ben Jay no because the hose clamp will be tight around the piping
im just fussy...
Australians are the Canadians of the South.
+Casey Weaver fair enough
well Australia's most northern city is Whistler
+Casey Weaver But better.
+hyster16t Don't be hasty we are both awesome... My cousins have Canadian and Australian citizenship.
+Justin McMullen you are very stupid
back in an age lost to the mists of time we used the same kind of material to add lips to thfenders of our 4X4's to cover the big wheels the stuff available here in the states then and now has a round tube top kind of like if you glued a garden hose to one side of the material you used. It helped keep the "flares" stiff, especially when we used the 6 inch stuff
anyone else bothered that the rivets arent the same distance apart?
#OCDissues
literally after I typed that and pressed play again you said you can measure them or just smash it in •_•
Yes
Alan DeGenerous No, I pause it first. I'm not a monster.
+Moth. Yes.
LiamzMedia if you want me to laugh make a funny joke, your just being fucking cancer.
ha ha ha no fuck you.
Now we need some DIY over-fenders, haha! Maybe we can use the same gardening-edging... Tryna' think of how you can get it to hold a slight bulge on top of the natural bend of a fender over the wheel...
+Violetta I think it would need some cuts going vertical along the edging allowing it to fold over itself. Wouldn't it be cool to do that and then plasti-weld it to hold its shape?
+Violetta They did this before using a bin or something
+Violetta I think you need to enhance your james bond effect.
+RedRacer++ I'd totally do it.
+Austin L (Austin's Adventures) I saw that they did that but I would prefer it to be more of a plastic or polymer material like the garden edging.
Thumbs up if you're LEFT HANDED!
+Mighty Car Mods what if you're both?
Kneel Ye right handed peasants
+Mighty Car Mods AMBIDEXTROUS.
+Mighty Car Mods What if all you have is a left arm? Is it cool to do just a thumb up?
+Mighty Car Mods YEAH! It sucks though sometimes.
I used a garage door seal for my car, worked great
I have now installed this edging on my car, my motorcycle and my girlfriend's lower lip! Best $12 ever spent, thank you MCM!
If you guys did this full time I would watch the shit out of it
You two have that chemistry that jeremy james and richard had that makes the show so entertaining. Considering how little time you two have and the comparable budget I'm so impressed and entertained every time and always want more. Look forward to where the show goes and cant give higher praise
put a bracket on the door lip and a magnet on the corresponding lip and they will lock together when you close the door
+Jacquobite thats actually a really good idea...
will that stuff fit a Ferrari?
Will that fit on my Honda?
+Scootastic MC more realistically, will your Honda fit that stuff?
+pugman205 L
pugman205 Why the bumwobbles do i have so much likes on that comment?
Scootastic MC No idea
go get some rain gutter for them sideskirts :)
Tyler Perry I've done the rain gutters b4
Tyler Perry careful if you do that in US, you may be arrested for collecting rain water. lol
Michael Vodak yeah no joke
I just did this to my 96 Ram a few weeks ago! Lol. I used 4" vinyl floor base tho (used commercially) bc I couldn't find edging like this. "lowered" my truck 3" (my truck actually had a 1" tab built into the body along the whole side, and had a 3" chin spoiler on the factory bumper. Truck is lowered 2"/4" for now until I can afford those expensive $400 spindles and also a low profile transmission crossmember and a 1 piece aluminum driveshaft to eliminate the carrier bearing and its crossmember (weight reduction!), but this gets my truck 3" lower, aerodynamically speaking, to the ground, to help keep air out from under the truck, reducing turbulence & drag (reduces vibration slightly at highway speeds), as well as slightly lower air noise inside the cabin at highway speeds too. Great mod to do!
Love the fact that you boys are sticking to the old MCM Style! Cheap budget and sometimes a little sketchy :') Love watching you guys so much!!
Man they are MILKING not finishing up the Wasaabi/Toosexy series.
I don't know about you but I love seeing them work on these cars.
+AimlessMoto They do work full time jobs and can only do this in their spare time. So maybe they have been busy . . .
+AimlessMoto well this is not a full time job if it was we would get around 6 videos every 2 weeks or so
I was just thinking that
I kiw. I've waited almost 2 weeks for 3 videos that aren't even based on the series! :(
Moogs foo fighters shirt is epic
This video was really riveting to watch
My Favorite type of MCM. Fun, Easy, Music, Voice-over, Budget. This get a thumbs up from me.
found this one on the interwebs. Looking at how far you gents have come is awesome. Also...one thing for sure, Marty has definitely adapted to your dry dad jokes @mook. I love boring dry jokes lol🤣
Would you be kind enough to ship that Saab back to Sweden? After you're done with it ofcourse. preferably to my garage :)
opi safag they will raise it just so the dumbass ricers stop ruining the car more
Marty's lip sync at the beginning made me give this video an insta-like
I dig that SpaceX shirt that Marty's wearing.
I have never seen a kick that came open with the door. Dude, don't dis it, OWN IT. Different, but that is awesome too. Love this.
I used the same type of edging for my Jeep Wrangler for temporary fender flare extensions. I used zip ties to hold it on. My girlfriend hated it so I liked it that much more.
Thumbs up for Foo Fighters!
+Juan Lara >not sure if srs
+Juan Lara Kim Jong Illest
foo fighters 👎 NIRVANA!👍 dave isnt shit without Kurdt! never will be either! POS!
+Matt Bonaccio Thumbs down for bernie
+Matt Bonaccio TRUMP 2016
The Horse neigh at 6:08? Wtf lol.
+Azael X Intro to one of Moog's songs
Lol I was wondering what that was.
+Azael X www.bunnings.com.au/rockdale-150mm-x-6m-galvanised-corrugated-garden-edging_p3321012
Hahahaha
Lol
MCM going back to their roots with mods like this! Love it!
If you want to get rid of the 'white/grey' edge on dark colored cut plastic, a quick blast from a heat gun with a small nozzle will re-melt just the edge and turn it 'mostly' back to black. Works well on ABS as well.
Just don't overcook it. For best results, get an adjustable heat gun (such as those used for electronics work) and set your temp just above the melting point of the plastic you're up against.
Ground effects and spoilers do work otherwise you wouldn't see them used so much in racing. A front air dam doesn't work at slower velocities, but get in the zone and that all changes.
I should rivet some to my shoes for street cred and to help stabilize me when I run really fast away from all the jealous Honda owners.
Front lip looks awesome, side skirt looks awful lmao XD
So now it's a Gardener Dentist Jet?
If you get a wider one, you can fold it over on itself, and then it will not just be vertical but also slanted outwards a bit, which will look cooler and might actually do a little to help aero.
same stuff here has about 1/2" round tube at the top, would look good with the tube at the bottom edge. it can help some cars to not get blown around as much by wind just for keeping some air out from underneath.
It looks like what Nakai-san uses on the RWB Porsches.
Sick burn
Lol, same tools used all also
Better than what Magnus uses. At least it's one color and doesn't have shitty louvers punched in it.
Foo fighters shirt! Hell yeah
Check out ekranoplan or GEV for ground effect.
+rimmersbryggeri Ekranoplan is a beast of a machine!!!
MCMLXXVI
Absofuckinglutely.
+rimmersbryggeri Caspian Sea Monster!
rimmersbryggeri
This is sweet. I did this to my S13 Silvia years ago. The edging I used was almost a rubber kind of thing. Also, I ended up blacking my rivet heads out too. I didn't like the silver look.
love it one time i did it out of house sideing and made side skirts on my car people couldnt believe what it was lol ..looked great too was a left over from a job so free ...
We need 3000$ challenge part 11 and 12...
yes!
yessss
yessss
Maurice O Brien
LOL - that you didn´t measure out the rivet wholes was triggering my OCD like mad!
holes*
Both left handed?!?? Unsubscribed......weirdos....
+Wil Collins im left handed, well when im having a mad fap sesh.
that way it feels different =P
+Reece Martin I just sit on mine. Bit of lippy and away I go...
It's Australia, everything is backwards
+Kyle TheTreeKat hey hey hey im aussie and left handed
Locky Morgan lol
The Garden-lip is actually used ALOT on Ecomoders to keep air from entering beneath the car.
Usually they see a 5% increase on MPG with a lip installed.
So its actually doing something.
This will give some "ground affects" by giving a place for a low pressure to build, somewhat. I would recommend putting washers on the rivets. A small area like that will split the plastic from air pressures and vibration while driving. Rivet washers can be bought or stainless washers for bolts the same size as the rivet shaft.
need to get some universal wheel flares on wusaabi bro 👍
+FordeFilms Ducktail wing 👀
Whats up with Part 11 ???
its madd that Marty is wearing a SpaceX shirt :D
+aceofspades8759 SpaceX chopped pretty much everyone in the space industry this year!
Sweet other Lefty man that means that you get to Lefty it in there now doesn't it right now I drive a Toyota Celica GTS 2000 edition and lover working on learning the whole entire engine so I can do all the work myself save me money and gives me a sense of Pride and ownership with my vehicle thank you guys so much for what you do keep it Rockin and stay fly Like You Are
glad you guys are back to using Moog's music in the videos. great job!
When are more of the car challenge videos getting released? its over 3 weeks since the last guys :P
+Steffen Fisker i have the theory that they are trying to fix marty's car, it never worked properly
+juan carlos Palomino - They raced them at Sydney Nationals. That would suggest to me Part 10 is the last episode...
who cares! finish the cars and race them! milking the crap out of this!
for real!!!
+sako76 They already have raced them, they just haven't released the video of it yet. That video of them at the most recent MCM event showed them racing both cars down the quarter.
I believe they've already raced them at their one event.
so if they have already tuned and raced and have the footage, their just milking every drop. enjoying.
+sako76 I ment.. annoying!
Where is part 11? Been waiting for ages
Lucas Fernandes fight me
why ?
Lucas Fernandes ly
My first side skirts came off a dresser. Looked ABS legit professional when I was done. But that's what I do, too. Fab work.
How has it only been three days since this was posted? I have never been so impatient for new episodes of anything.
Thumbs up if you miss the 180SX they built.
I think EZ Lip or All Fit Lip are good alternatives
Garage door bottom seal also, just not as big
Should have kept the Garden Edge sticker.
What a way to hint at the return of that dirty 180. You guys are brilliant!
Coming up next week, the plywood wing, leather bonnet straps, and a boot lined with sheep skin fur taken from Sheila's pull out couch.
Marty and Moog, your subscribers are waiting, waiting, waiting for the next episode.
I really cba waiting any longer roll on the grand tour with jezza: )
Did you accidentally burn one of the cars down? Wheres the rest of the series!! :D
+letterpool Aye!
+letterpool maybe Marty's car, it never worked how it's supposed to
lol
Taken over by frogs he says !!!!!!!! LMFAOOOOOOOOOOOOOOOOOOOOO. I'm at work looking quite silly right now laughing so much. And I can't tell anyone why I'm laughing because I'm laughing at the ill dad joke lmao
Two tips for riveting:
1.) If you have to rivet many rivets or often, buy an air riveter. You'll never want to rivet without one.
2.) If you want to have permanent black rivets, just buy black ones...
Thank you guys for your videos. Still cant wait for next episodes. I like all your episodes, those funny/silly - they(you) make me laught my ass of. Those epsiodes like supergramps are interesting, love them, but I dont have the money(time) to acomplish such project. You should do definitely what makes you happy because it will make happy and inspire all reasonable human beeings. And remember: haters gonna hate, there is no video on youtube, that does not have dislikes. You are legends!
Should have left the "Garden Edging" sticker on it.
when is the next episode of the turbo car battle? it's been too long
Try black rivets.
Did you think of putting a little bit more strenght into the front of the bumper? Maybe a couple of little brackets. Because at motorway speeds the air might push on the garden edging and try to pull towards the ground on the lower part of the bumper which is weakened by the massive cut for the intercooler. If you make the brackets in such a way that the strained piece of metal would be strained lenghtwise, you'll probably get away with a very light(therefore cheap, wich certainly doesn't hurt a thing) and effective bracket.
the home depot stuff has a rounded edge and a lip that happens to be perfect for covering rivets. did it on my e30
these are so hard core ricer mods that they forget to cook the rice
How did you get the name Moog?
+Jeff P. The synthetiser / organ, I guess.
+Jeff P. He's in the sound/music industry and uses moogs. IIRC, people just started calling him that.
Sooo, did you guys forget about posting a new video?
thats what im saying i check everyday and nothing
Same I hope the next ones worth the wait as is for mcm usually
This is exactly the kind of top notch bodgery I subscribed to you guys for. Ace.
i did this a few years back, lasted about a month with cable ties alone, they ended up cutting through them, next i went to clark rubber and got some 4x4 wheel guard trim, only downfall is its heavy and strong, so i parked too close twice and it fell off, now wanting a legit one so it lasts, still was fun though XD
i kinda want to use this as mud flaps
They do wrok
better known as "how good are rivets" episode
Wtf happened to the $3000 challenge
you can also use (more expensive) threaded inserts that are ribits that is hallow & threaded in the center
allowing for that ribbit size bolt to be fastened & taken off later ect
I always use ribits in the car audio world ....
great video man! (from Mesa,AZ USA)
You're sounding a bit Froggy
+SimpleUserName it comes out Budweiser on the weekend's but IDK if you got that commercial over there
Good to see you guys are getting back to what the channel started as... although I really enjoy watching everything you produce! Keep up the great work!
The front lip looked good, the side skirts not so good. Less is more!
+Patrick Archibald yup, this car just wasn't a great candidate for the side skirting part.
I hope that Saab represents the Japanese Domestic Market and not James Daniel May. They're both JDM.
Yay marty,
nice spacex shirt.
- really like elon musk myself :-) the guy's also doing crazy stuff :-)
Those lips actually help with aerodynamics. It helps to lessen the turbulence with the undercarriage. That is why many newer cars have full skid-plates.
Wish you had a tv show 👍 I watch every episode of yours, can't wait for next episode feels like forever
thumbs up if still waiting for next episode
Nice foo fighters t shirt
Did they just give up on the Shit box challenge?
You could do some coast down tests, before and after, to see if you got any improvement (i.e. drag reduction). But then, you'd have to remove it all again...
I made a 3" vinyl flooring front lip for my eh2 civic. first drive up my driveway scrapped about half the lip off. good times!