@Pro Hack, can you please tell me wich model of Polarized film its used to replace the damage one? i mean there is 0 grades, 90 grades 45 grades wich grade of polarized film its used to replace the damage one? thanks
@@irishguy200007 it depend on track damage or an in lcd glass.Actually vgh and vgl most common problem if no picture or blank display.Before you cut the track,please check burn an on side of lcd glass and check cof if damaged.
You appear to have real knowledge so I might ask you if I disconnect the left cable on tcon board, I should see the TV playing on the righthand side of screen only,correct? What should be displayed on the left a bright Li up screen or a dark screen?
@@irishguy200007 if the only right is have display,the left had damage track on side glass,just try use tape or cut track,maybe clk1-5 is damage.tcon with double side flex cable,can be bypass if lcd still good to have display.
Can I remove a gate cof or cog out of circuit and expect the corresponding one on the other side of lcd to take over? I have lower left cof or cog that is damaged.
You appear knowledgeable, Can I ask you, if I have a bad cof or cog on lcd screen on one side like lower left side, can I disable this and will right hand side cof take over?
yes you dont understand, the beginnig the panel doesnt even show image the reason is the line, vgl, vgh etc also broke... at the end of the video the image was restored, any method will fix the glass broken that damage can not be repaired in this method he just restore de image on the panel if still you doesnt understand maybie youre not even a technician so this video isnt target to you.
How did you kw which side of the cof was bad
@Pro Hack, can you please tell me wich model of Polarized film its used to replace the damage one? i mean there is 0 grades, 90 grades 45 grades wich grade of polarized film its used to replace the damage one? thanks
Shandar video sir 👌
thanks for watching
Bol kar samjhate to jyada achchha hota jaldi se samajh me aa jata video dene ke liye dhanyawad guru ji.
शुक्रिया
Very good video.
Thanks for the visit
👌🏻🙏🏻🌹💐 superrr....
🌹
Very good information sir
Thanks and welcome
Wouah, trés belle vidéo! Bravo Man 👍
Gracias por la explicación tan practica.
Ester después de Gracias no Nosotros.
Watching here and thank you for sharing .
Thanks for the visit
Very good info ❤❤❤
Thank you for the video. Please describe the algorithm for searching for signals to be cut off. For other panels.
I will try later
do you cut short (damaged) power lines? @@ProHackHD
Good work
Thank you so much 😀
Superb sir
welcome dear
Very useful video dada Kemon acen bhai
thanks for watching
@@ProHackHD ok brother
great job
Muito bom sempre 🇧🇷✔
How many tracks were cut?
More that 5 anyway
Is this fake?
Video good i like
thanks for watching
sir pro hack can u elustrate how many pin did u cut part 1 which is a broken parts.
Is this a fake video?
Thanks a lot
Most welcome
Very simple and understood to indentify problem.Just cut the line whether left or right problem.Good job sir!!!
Ok. Thanks
Can you explain why he cut 10 pins or tracks?
I thought there 5 it said vgh vgl etc?
@@irishguy200007 it depend on track damage or an in lcd glass.Actually vgh and vgl most common problem if no picture or blank display.Before you cut the track,please check burn an on side of lcd glass and check cof if damaged.
You appear to have real knowledge so I might ask you if I disconnect the left cable on tcon board, I should see the TV playing on the righthand side of screen only,correct? What should be displayed on the left a bright Li up screen or a dark screen?
@@irishguy200007 if the only right is have display,the left had damage track on side glass,just try use tape or cut track,maybe clk1-5 is damage.tcon with double side flex cable,can be bypass if lcd still good to have display.
What is this ?
Identify the block site and disconnect.
Super
Thanks
AVDD and VCOM did not arrive at GATE COF
Can I remove a gate cof or cog out of circuit and expect the corresponding one on the other side of lcd to take over?
I have lower left cof or cog that is damaged.
I need LG 49inch display available
You can search any nearby store.
Correction sir you demonstrate a wrong LCD PANEL Not the same..what you repaired..😁😁
Visited the first panel to understand.
Yes its true, the one he demomstrate w/ sidecof is non gip panel while the one he repaired is gip panel(w/ckv lines)
You appear knowledgeable,
Can I ask you, if I have a bad cof or cog on lcd screen on one side like lower left side, can I disable this and will right hand side cof take over?
👍👍👍
Thanks for watching.
🙏💓🙏
स्वागत हे
😢
💖💖💖💖💖💖💖💖
💖💖💖
Don’t understand beginning video and end looked the same 🤔
Thank you for your information.
yes you dont understand, the beginnig the panel doesnt even show image the reason is the line, vgl, vgh etc also broke... at the end of the video the image was restored, any method will fix the glass broken that damage can not be repaired in this method he just restore de image on the panel if still you doesnt understand maybie youre not even a technician so this video isnt target to you.
@@hernandocarcamo3950 well it was a bit confusing as it jumped to someone drinking etc I thought it was like a video
I don't understand why he cut 10 or more tracks?
Thompson Anna Gonzalez Michelle Gonzalez Michelle
Frad