Thanks to Factor75 for sponsoring today's video. Use my link to get 50% off and free shipping on your first Factor box! strms.net/factor75_wesley_treat
Catch Phrase for your cabinet. "If at first you don't succeed, reduce your expectations until you are a success." Nice project. Wish I had room for another cabinet.
I’m subscribing for the adorable nerdiness about organization **and** for bonus spider 😂🕷️ Also, the sound of that drawer closing was soooo satisfying.
Definitely thought that the 3/4 thick shelves were overkill, and could be built with less material. One nice feature about the aluminum angle rails, is if you have something taller than the bin, you can just take away the bin above and the space is clear.
Saw someone on YT making "industry standard" apple boxes. He left one end of the full apple open, and made the half, quarter, etc smaller to fit in the full one. Whole range of boxes fit in one full size box. Brilliant saving of space on the grip truck. Might consider this for your project.
What's up, nerd? Purpose built furniture may be one of the most satisfying things to build. Being paralyzed by figuring out perfect details is extremely relatable. As is throwing pieces of wood across the shop. Thanks for sharing!
I'm a big proponent of pocket holes as a fixing method. I'm currently converting a coach bus into a mobile tiny home, and the entire interior wall framing is secured using pocket holes. G'day from Down Under! 🇦🇺 Love ur vids. 👍
Great project. I enjoy watching your videos a lot. Not sure why you haven’t been showing up in my feed. I’m going to go watch some that I missed. Like…. The apple boxes. Be more like Dave! LOL
Very cool build. I liked the added box storage on the top. The fact that you didn't put a top above the box storage means, tall boxes can go up there, and more importantly, you can't stack more stuff out of reach on top of the unit. There is one big thing that stood out to me that was missing, a tray for your dry erase pen, or pens if you use different colors. Even more so if you are going to add a dry erase board. I have a dry erase board in my shop to avoid having little pieces of paper all over the place. I also have 3 bins where I put Dry erase pens, Permanent markers, and pencils.
On the trays, I would have routed the bottom plate before installing it. Add a nice chamfer, or round over first and then install it. I think that’s the only reasonable way to get what you wanted; easy fit, smooth edges without sharp corners and a professional look. I’m sure you could probably rig up a jig or something to chamfer the edges of the bottom plate post-installation but it would be way more work. So maybe on V2 you can add a quick step in between! Hope this helps.
The top edges have a 1/8" roundover, which is enough to let them nest easily. I considered a roundover on the bottom, too, but since the nesting overlap is only 1/4", a 1/8" roundover on both leaves little contact area.
Thanks again Wesley - fantastic video. We all need organized storage. This is another great idea I just saw on TH-cam: Super Small Parts Organizer - Workshop Storage Ferris Wheel. Cheers from down under :)
I like that you made the project trays double ended. Unfortunately they are symmetrical along multiple axes and I would for sure end up storing them sideways.
Just discovered your channel; really enjoying your content, thinking, and presentation style. Your presentation demonstrates more clever thinking than mine on ways to meet my own shop organization needs. Pocket hole screws sometimes strip their holes easily; run them in with a drill on a low clutch setting.
Really enjoy you videos, keep them coming. One suggestion for your indecisiveness on storage quantity would be to make sections modular. Add what you need later without wasting material with rebuilding later.
i created some very large drawers for my kitchen a little over a year ago for canned goods, bottles of sauces, and similar. I used marker board for the interior bottom of the drawers because i wanted something that would be easily cleaned. they just rest on a 1/2 inch lip that i made in the drawer frames, so it easily pops out. despite being 23" wide, by 22" deep, and supporting only liquid filled containers, and nothing pulling them taught, they have almost no sag. there is a little bit of sag to the center, as i learned thanks to a liquid spill, but it's very little and isn't likely to increase. they're also completely waterproof on that side, so liquids aren't an issue. definitely recommend marker board (that's what it's called at Menards anyway... it's the dry erase board stuff) for shelf drawers.
That's the plywood I've been using for my shop storage for Systainers. It's been remarkably consistent and for (now) under fifty bucks a sheet, it's a great value. Blue store doesn't carry it here so I have to buy from the orange store, which is not my preference, but that's where it's available.
I'm pretty sure this is the first video of yours I have watched. I would have subscribed anyways, but the "Days Without a Dumb" counter absolutely sealed the deal. I'm off to watch how you made that now.
Love the whole plan, great when you have limited space like I have. Need to finish the basic floor plan in my single bay garage - but I'm seriously considering building this. Thanks 👍
You should just go nuts with it. Tape dispensers, spray paint can holders... In fact, build it out so it holds your entire shop! But I guess if you did that you would be right back where you started.
I would build one of those signs with the buzzer but I'd have to just put permanent zeros and a buzzer that never turned off!😂 I love your retro style BTW and your videos are always entertaining. I'm still learning how to film but you are an inspiration. Thanks!
Harbor freight just had round 4 inch magnetic trays for .89 cents. I also pick up there cheap magnetic hooks and clips when I see them on sale. I have a couple of metal 4 drawer file cabinets (I got for free) next to my tablesaw and assembly table. It holds jigs and fixtures patterns ect. And love the magnetic holders for organizing things at arms reach. I do love the cabinet you built. I may build one soon I'm needing more storage !
Very thoughtful and I like how you can stow and go as needed. Perhaps a French cleat for shelves, custom tool holders or relatable tools. There’s the more modern, peg boards, etc
Thanks for yet another awesome video! Love the concept of stacking trays and the place to put unopened orders. The sides of the cabinet look like a great place to put clamp racks or small tool storage. Thanks for showing your builds with problems and successes!
Can you have primary and secondary storage? This rack would be the primary storage, the 4 or 6 apple boxes you use all the time. And in the rare cases, once other year, when you need more than that, you have 2 or 4 more boxes stored on the loft. Primary storage is what you use all the time, so it must be readily available without delay. Secondary is stored away, not wasting space in your normal work space, it takes longer to get to it, but it is so infrequent that the delay does not matter much. (and you can have a tertiary storage, for those things you use every 10 years, you keep them in a rental locker)
Great project as usual. I know it doesn't help for this one, but Kreg makes a shorter pocket screw driver bit for situations like that so you can get into tighter spaces.
Nicely done ! Great idea to have 2 handles. Will also make it easier to pick up and carry around when they are somewhat heavy. I kept wincing though every time you were struggling to align the dividers. Wouldn’t a spacer block have made it much quicker and easier?.
1. I was just laughing to myself thinking about "double ended tools" sounds kind of naughty, then you flashed a gimp guy😂 2. Yeah pocket holes always takes up surprising amount of space to screw in! 3. I would put clamps and squats on the sides of this thing!
A 1/4" wobble extension with a slightly shorter (or not) pocket screw bit solved the tight shelf spacing for me. I do this on spice rack inserts for kitchen cabinetry.
A great project, thanks for sharing. I use those 'right-angle clamps' (as at 15:34) when making frames but be aware that 4 of them around a frame doesn't necessarily make it completely accurate. As for the vacant space ideas, add a block of post-it notes or equivalent along with a pencil and eraser.
Gridfinity for the smaller boxes - print out some of those for maximum organisation (I'm assuming somebody's said it though). I'm in the camp that likes pocket holes - I'm ham fisted, and life's too short.
Love when you say I can just shift things up yet already know why it's not happening.. the same reason you pulled it apart twice you have to tear it all down to redo it. But I loved the videos keep them up . I was so happy when I seen a new one today
13:57 first thought when seeing the Pocket Hole Jig “neat design not having to lean over a work piece to clamp but they’ve doe away with the dust extraction which more than undoes the benefit of the clamp”
I’m thinking aluminum angle instead of expensive plywood to hold the storage boxes especially after having to disassemble because you couldn’t do the screws. I’m thinking using the carry slot as the hand pull also. Really like the idea of gluing a piece of whiteboard so you can relabel as needed.
brilliant ! I find myself having the same ideas/thoughts: a box for each project and these zip-bags in different sizes: when disassembling something you can store every little screw and part together. Now I need a bigger shop. Cheers 👍
I saw it miles ahead of you. the moment that second shelf was placed I thought "he'll never get his drill in there...and then YOU DID IT AGAIN! We've all been there - luckily, we don't all have an audience watching. You're a good sport about it. Maybe I'll start looking at an imaginary camera like Jim in the Office every time I have a "dumb" in my shop. Does it help keep you from cursing and kicking?
First time viewer and subscribed right at the end. Love the project and your character makes it fun to watch. Can’t wait to see what you’ve completed in the past and what’s up next! Hi from Australia 🇦🇺
9:20 I feel this so deeply, like literally every project. I've even gotten to a point where the indecision of one project is holding up another project, which is holding up another project, which is holding up another project... and on and on in an ouroboros of decision paralysis. I think maybe the only way to escape it is to just pick an option at random - I make a table and roll a d20 :P - and make future me deal with the tragically inefficient consequences.
I purchased an angle gearbox for the drill (fits hex bits). That way I can reach with the drill as long as I can reach with the shaft and my hand (or jig) to hold the gearbox. I can very much recommend it. It was very useful for screwing roof tiles that was covered by other roof tiles.
The right angle drill adapters all the different brands sell work well for doing pocket holes in tight spaces like that. Also, make your shelves modular so you can add more later as needed. It takes a little more material potentially, but can be worth it. That or make them standard sizes so you can put trays or thin apple boxes in the same space, or remove a divider and put the thicker apple boxes in.
What you need Wesley is the Milwaukee Right angle Cordless Impact Driver, Li-Ion, 12.0V. With your 4" or 6" square drive attached, you will be able to get into the tightest of openings while doing pocket holes. I've had one for years and I don't get it out often but boy when you're in a tight jam this is the tool I reach for. Good luck I love your videos.
@@WesleyTreat The great thing about Milwaukee's 12 v battery platform is that its shape is the same as the barrel of the unit, so nothing sticks out past the sides. I purchased one several years ago, and it was a game-changer.
Great build! I was cringing as you boxed yourself out of access to the pocket holes... only because I've been there, done that, and repeated the mistake because I apparently don't always learn from mine... what about some hangers on one side for extension cords or hoses?
Found your channel today. Loved the video! I especially enjoyed "dumb" board. I need one of those... but then I think it would become discouraging because it might get to 1 only once in a while. 🙂 The storage cabinet is great, but the only thing I would have added is a flat board that pulls out like a drawer at about stomach height (like old school library card catalogues). Think of a retractable shelf. It would serve as a tray to set bins or small boxes on so you can fish through them without having to carry the trays/boxes to a bench or table, and just grab what you need. New subscriber.... and Happy T-giving!
Thanks to Factor75 for sponsoring today's video. Use my link to get 50% off and free shipping on your first Factor box! strms.net/factor75_wesley_treat
Thank you for showing the bloopers. Makes me feel a little bit better about myself. I pay the stupid tax on a nearly daily basis
"My inability to decide things like this are exactly what hold up every single one of my projects." I hear you on that, brother.
Also a perfect catch phrase.
It will annoy me forever that I used the wrong verb conjugation in that sentence.
So true…this is what takes the longest 🤪 how about “inability to decide = time” ? More of a reminder than a catchphrase 😂
Nice. Now add some dc motors to the wheels, some proximity sensors and a raspberry pi, and have it follow you throughout the shop.
We need a collab with Bob from I like to make stuff for that :)
😂😂😂
with a little robot voice that pesters, like "excuse me, sir. can i get you something?"
Catch Phrase for your cabinet. "If at first you don't succeed, reduce your expectations until you are a success." Nice project. Wish I had room for another cabinet.
The extra inch of material flying away from the camera gave me a genuine lol moment. Thanks for showing the projects warts and all. Fun stuff
I’m subscribing for the adorable nerdiness about organization **and** for bonus spider 😂🕷️
Also, the sound of that drawer closing was soooo satisfying.
This channel deserves so many more subscribers.
I built a similar storage unit, but instead of shelves between bins, I just used strips of aluminum angle to act as runners/slides. I like your videos
Definitely thought that the 3/4 thick shelves were overkill, and could be built with less material. One nice feature about the aluminum angle rails, is if you have something taller than the bin, you can just take away the bin above and the space is clear.
I use steel strips to edgeband the upper halves of my shop furniture. I can magnet stuff to them and they help stiffen ply shelves.
I love the mistakes and miscues. Remind me of the way I often end up working on projects.
Saw someone on YT making "industry standard" apple boxes. He left one end of the full apple open, and made the half, quarter, etc smaller to fit in the full one. Whole range of boxes fit in one full size box. Brilliant saving of space on the grip truck. Might consider this for your project.
Was it this handsome guy?
th-cam.com/video/xnf5q5fxDtQ/w-d-xo.htmlsi=LMPX1ZVkTIrL-49R&t=776
@@WesleyTreat lol
Ha ha that’s awesome to be recommended to check out your own project!
What's up, nerd? Purpose built furniture may be one of the most satisfying things to build. Being paralyzed by figuring out perfect details is extremely relatable. As is throwing pieces of wood across the shop. Thanks for sharing!
I was literally just reading this comment as the “dumb button” moment happened, and it was DEEEPLY relatable 😆!
You never disappoint. Constant improvement is a good thing.
Thanks!
Some woodwork shops are self-fulfilling exercises. Use tools in a workshop to make things for the workshop. Like a hobby mobius strip.
So you’ve seen my shop?
I'm a big proponent of pocket holes as a fixing method. I'm currently converting a coach bus into a mobile tiny home, and the entire interior wall framing is secured using pocket holes. G'day from Down Under! 🇦🇺 Love ur vids. 👍
Great project. I enjoy watching your videos a lot. Not sure why you haven’t been showing up in my feed. I’m going to go watch some that I missed. Like…. The apple boxes.
Be more like Dave! LOL
Very cool build. I liked the added box storage on the top. The fact that you didn't put a top above the box storage means, tall boxes can go up there, and more importantly, you can't stack more stuff out of reach on top of the unit.
There is one big thing that stood out to me that was missing, a tray for your dry erase pen, or pens if you use different colors. Even more so if you are going to add a dry erase board. I have a dry erase board in my shop to avoid having little pieces of paper all over the place. I also have 3 bins where I put Dry erase pens, Permanent markers, and pencils.
When you need to make a hard decision, flip a coin. Why? Because when that coin is in the air, you suddenly know what you're hoping for.
On the trays, I would have routed the bottom plate before installing it. Add a nice chamfer, or round over first and then install it. I think that’s the only reasonable way to get what you wanted; easy fit, smooth edges without sharp corners and a professional look.
I’m sure you could probably rig up a jig or something to chamfer the edges of the bottom plate post-installation but it would be way more work.
So maybe on V2 you can add a quick step in between! Hope this helps.
The top edges have a 1/8" roundover, which is enough to let them nest easily. I considered a roundover on the bottom, too, but since the nesting overlap is only 1/4", a 1/8" roundover on both leaves little contact area.
Thanks again Wesley - fantastic video. We all need organized storage. This is another great idea I just saw on TH-cam: Super Small Parts Organizer - Workshop Storage Ferris Wheel. Cheers from down under :)
I like that you made the project trays double ended.
Unfortunately they are symmetrical along multiple axes and I would for sure end up storing them sideways.
Wheels. My new motto for my shop is everything goes on wheels.
Just discovered your channel; really enjoying your content, thinking, and presentation style. Your presentation demonstrates more clever thinking than mine on ways to meet my own shop organization needs.
Pocket hole screws sometimes strip their holes easily; run them in with a drill on a low clutch setting.
Really enjoy you videos, keep them coming. One suggestion for your indecisiveness on storage quantity would be to make sections modular. Add what you need later without wasting material with rebuilding later.
I subbed as soon as I saw the ray gun push stick. Yep, there's someone I can relate to.
i created some very large drawers for my kitchen a little over a year ago for canned goods, bottles of sauces, and similar. I used marker board for the interior bottom of the drawers because i wanted something that would be easily cleaned. they just rest on a 1/2 inch lip that i made in the drawer frames, so it easily pops out. despite being 23" wide, by 22" deep, and supporting only liquid filled containers, and nothing pulling them taught, they have almost no sag. there is a little bit of sag to the center, as i learned thanks to a liquid spill, but it's very little and isn't likely to increase. they're also completely waterproof on that side, so liquids aren't an issue. definitely recommend marker board (that's what it's called at Menards anyway... it's the dry erase board stuff) for shelf drawers.
That's the plywood I've been using for my shop storage for Systainers. It's been remarkably consistent and for (now) under fifty bucks a sheet, it's a great value. Blue store doesn't carry it here so I have to buy from the orange store, which is not my preference, but that's where it's available.
I feel like this is the exact kind of project that pocket holes are perfect for.
Good job Wesley!
I'm pretty sure this is the first video of yours I have watched. I would have subscribed anyways, but the "Days Without a Dumb" counter absolutely sealed the deal. I'm off to watch how you made that now.
Love the whole plan, great when you have limited space like I have. Need to finish the basic floor plan in my single bay garage - but I'm seriously considering building this. Thanks 👍
That's a thing of beauty … and totally worth the Dumbs!
Now you just need an organizer for that organizer organizer!
You should just go nuts with it. Tape dispensers, spray paint can holders... In fact, build it out so it holds your entire shop! But I guess if you did that you would be right back where you started.
I literally just watched one minute and I already have 4 project ideas I want to make, thanks for that 👍
This is one of the best channels on TH-cam. There a lot here that I want my channel to be like. Keep up the great work.
Great project! Your catch phrase is Hey Nerds! I love it and want it on a t-shirt!
I would build one of those signs with the buzzer but I'd have to just put permanent zeros and a buzzer that never turned off!😂 I love your retro style BTW and your videos are always entertaining. I'm still learning how to film but you are an inspiration. Thanks!
Dude, you're so relatable.
‘What’s up Nerds’ is the perfect catch phrase. So perfect perhaps the collective could be ‘a Treat of Nerds’.
That looks like a fantastic idea!! Oh for time to tidy up!
Add some French cleats to the sides! Never ending possibilities.
The ballet moves the dumb button I can so relate to all of it. I follow a few woodworkers who use radiata pine. It sucks that wood is so expensive.
"What's up nerds?" is your catch phrase.
Harbor freight just had round 4 inch magnetic trays for .89 cents. I also pick up there cheap magnetic hooks and clips when I see them on sale. I have a couple of metal 4 drawer file cabinets (I got for free) next to my tablesaw and assembly table. It holds jigs and fixtures patterns ect. And love the magnetic holders for organizing things at arms reach. I do love the cabinet you built. I may build one soon I'm needing more storage !
Also the music when you lifted your foot was hilarious!😂
Great solution for the storage problem m, really like the overall design!
Very thoughtful and I like how you can stow and go as needed. Perhaps a French cleat for shelves, custom tool holders or relatable tools. There’s the more modern, peg boards, etc
Loved the overflow/reorg option at the top.
Needing to hit the button twice in one day on the same project is . . . been there, done that. on Monday.
Absolutely love your channel! The Harbor Freight coupon was hysterical!😂
Thanks for yet another awesome video! Love the concept of stacking trays and the place to put unopened orders. The sides of the cabinet look like a great place to put clamp racks or small tool storage. Thanks for showing your builds with problems and successes!
This was fun again, thanks for sharing!
First time here - that is quite possibly the best push stick I've ever seen..... subbed 😁👍
I like that pocket hole jig!
You can make like Jed and Clamp it! 🤣
Fantastic Video as always. I am always put in a great mood when I see you in my feed!
Great film and build. Super useful. Mahalo for sharing! ❤
Can you have primary and secondary storage? This rack would be the primary storage, the 4 or 6 apple boxes you use all the time. And in the rare cases, once other year, when you need more than that, you have 2 or 4 more boxes stored on the loft.
Primary storage is what you use all the time, so it must be readily available without delay. Secondary is stored away, not wasting space in your normal work space, it takes longer to get to it, but it is so infrequent that the delay does not matter much.
(and you can have a tertiary storage, for those things you use every 10 years, you keep them in a rental locker)
Great project as usual. I know it doesn't help for this one, but Kreg makes a shorter pocket screw driver bit for situations like that so you can get into tighter spaces.
Yes, I did see that coming. I only wish I had seen it coming when I did a similar project.
next time use the tracksaw to take of 1 inch from the 19 inch piece.
And use spacers from scrapwood to space out shelves in stead of using lines.
This is my favorite kind of video project. Love hearing how the project as it comes along. The planning and changing is fun.
My goto for shop furniture is pocket holes too 😅
I dig it, Wesley. Solid work.
Nicely done ! Great idea to have 2 handles. Will also make it easier to pick up and carry around when they are somewhat heavy.
I kept wincing though every time you were struggling to align the dividers.
Wouldn’t a spacer block have made it much quicker and easier?.
1. I was just laughing to myself thinking about "double ended tools" sounds kind of naughty, then you flashed a gimp guy😂
2. Yeah pocket holes always takes up surprising amount of space to screw in!
3. I would put clamps and squats on the sides of this thing!
This is exactly what I need. If only I had the space!
A 1/4" wobble extension with a slightly shorter (or not) pocket screw bit solved the tight shelf spacing for me. I do this on spice rack inserts for kitchen cabinetry.
A great project, thanks for sharing.
I use those 'right-angle clamps' (as at 15:34) when making frames but be aware that 4 of them around a frame doesn't necessarily make it completely accurate.
As for the vacant space ideas, add a block of post-it notes or equivalent along with a pencil and eraser.
Gridfinity for the smaller boxes - print out some of those for maximum organisation (I'm assuming somebody's said it though). I'm in the camp that likes pocket holes - I'm ham fisted, and life's too short.
You inspire me and these storage videos are always my favorite for some reason
Love when you say I can just shift things up yet already know why it's not happening.. the same reason you pulled it apart twice you have to tear it all down to redo it. But I loved the videos keep them up . I was so happy when I seen a new one today
I've had reasonable success with the AurocoPly that I've been able to get from the big orange box.
I believe its better to have too many than not enough!
Thank you Wesley. I very much enjoyed your video.
13:57 first thought when seeing the Pocket Hole Jig “neat design not having to lean over a work piece to clamp but they’ve doe away with the dust extraction which more than undoes the benefit of the clamp”
I’m thinking aluminum angle instead of expensive plywood to hold the storage boxes especially after having to disassemble because you couldn’t do the screws.
I’m thinking using the carry slot as the hand pull also. Really like the idea of gluing a piece of whiteboard so you can relabel as needed.
Yes, or even just strips of wood either side. Since the boxes have sturdy bottoms, they don't need to sit on one.
Awesome job. Idea: Put an 1/8" round over on the bottom of the stack-able drawers to help with nesting.
The shelf can be called the “Even Tooly Shelf”
Because “Even-tooly” you’ll get around to using that stuff
brilliant ! I find myself having the same ideas/thoughts: a box for each project and these zip-bags in different sizes: when disassembling something you can store every little screw and part together. Now I need a bigger shop. Cheers 👍
Maybe a slide out shelf to hold stuff while you sort it etc
I saw it miles ahead of you. the moment that second shelf was placed I thought "he'll never get his drill in there...and then YOU DID IT AGAIN! We've all been there - luckily, we don't all have an audience watching. You're a good sport about it. Maybe I'll start looking at an imaginary camera like Jim in the Office every time I have a "dumb" in my shop. Does it help keep you from cursing and kicking?
Awesome job, thanks for sharing!
possibly a French cleat system on the other side for some tool/misc storage space???
Great looking design. 👍🏼
First time viewer and subscribed right at the end. Love the project and your character makes it fun to watch. Can’t wait to see what you’ve completed in the past and what’s up next! Hi from Australia 🇦🇺
😂 Dance of the Surgar plum fairy 😂
Love the white board name tag!
9:20 I feel this so deeply, like literally every project. I've even gotten to a point where the indecision of one project is holding up another project, which is holding up another project, which is holding up another project... and on and on in an ouroboros of decision paralysis. I think maybe the only way to escape it is to just pick an option at random - I make a table and roll a d20 :P - and make future me deal with the tragically inefficient consequences.
I purchased an angle gearbox for the drill (fits hex bits).
That way I can reach with the drill as long as I can reach with the shaft and my hand (or jig) to hold the gearbox.
I can very much recommend it. It was very useful for screwing roof tiles that was covered by other roof tiles.
The right angle drill adapters all the different brands sell work well for doing pocket holes in tight spaces like that.
Also, make your shelves modular so you can add more later as needed. It takes a little more material potentially, but can be worth it. That or make them standard sizes so you can put trays or thin apple boxes in the same space, or remove a divider and put the thicker apple boxes in.
That parcel tray is INSPIRED
Please, please, please make a dispenser for the bags, I use them in my garage daily and would love to see you build something I can copy😉
hey man in a shed another spiffing golden job
What you need Wesley is the Milwaukee Right angle Cordless Impact Driver, Li-Ion, 12.0V. With your 4" or 6" square drive attached, you will be able to get into the tightest of openings while doing pocket holes. I've had one for years and I don't get it out often but boy when you're in a tight jam this is the tool I reach for. Good luck I love your videos.
I've got the DeWalt equivalent, although I think it's a little bulkier. I tried it, but it was the battery that got in the way.
@@WesleyTreat The great thing about Milwaukee's 12 v battery platform is that its shape is the same as the barrel of the unit, so nothing sticks out past the sides. I purchased one several years ago, and it was a game-changer.
19:25 I saw that coming as soon as you started putting on the right shelves without the right side piece.
Great build! I was cringing as you boxed yourself out of access to the pocket holes... only because I've been there, done that, and repeated the mistake because I apparently don't always learn from mine... what about some hangers on one side for extension cords or hoses?
Found your channel today. Loved the video! I especially enjoyed "dumb" board. I need one of those... but then I think it would become discouraging because it might get to 1 only once in a while. 🙂
The storage cabinet is great, but the only thing I would have added is a flat board that pulls out like a drawer at about stomach height (like old school library card catalogues). Think of a retractable shelf. It would serve as a tray to set bins or small boxes on so you can fish through them without having to carry the trays/boxes to a bench or table, and just grab what you need.
New subscriber.... and Happy T-giving!
I suspected some grief would come from the spacing, but didn’t know exactly when. Definitely been there.