Bro na channel ku new subscriber oru doubte bro Enodadhu TCL tv 50" premier 1 kva steblizer la potrukom. Tv oodum pothu steblizer output green led tik tik sound oda blink aagi off aagudhu ena reason bro?
Hi, sorry for late reply, please check whether the inverter output is set to sinewave or square wave, make sure it is sinewave UPS(Inverter) and also check the o/p specification of inverter like voltage, frequency etc and see if it matches i/p requirement of stabilizer. hope this would help. Thank you, have a GOODTIME....
Hi sir, the transistor can be replaced and please do check if any tracks and or resistor are open. Thank you for watching the video and making time to comment. Have a GOODTIME.
Need to check the transistor that was dry solder as shown in the video, if faulty, it needs to be replaced and if it is good then need to trace the fault further...
![[LIVE] : ONE ลุมพินี 88 | คู่เอก "ป้อมเพชร vs อัสลามจอน"](http://i.ytimg.com/vi/1ZqTVVbMgbo/mqdefault.jpg)
Thank you sir I see video and I did same to same and results is good thanks sir
Happy to know the video was useful,
Thank you, have a GOODTIME.
Bro na channel ku new subscriber oru doubte bro
Enodadhu TCL tv 50"
premier 1 kva steblizer la potrukom.
Tv oodum pothu steblizer output green led tik tik sound oda blink aagi off aagudhu ena reason bro?
My vgurad is showing output when i check with tester but no applinaces is running why
D882 and zenor value btween them??
Hello, i recently bought a vguard tv stabilizer. It works fine but when there is a power cut. It doesnt run on inverter. What to do
Hi, sorry for late reply, please check whether the inverter output is set to sinewave or square wave, make sure it is sinewave UPS(Inverter) and also check the o/p specification of inverter like voltage, frequency etc and see if it matches i/p requirement of stabilizer. hope this would help.
Thank you, have a GOODTIME....
In V Guard authorised service centres, they r not checking pcb board , just they r replacing the main board and looting lot of money.
In my stabliser I'm able to hear tak noise frequently...may I pls know the reason?
It may be due to some loose connection, voltage fluctuation or failure of some component inside.
Thank you, have a GOODTIME....
Hello sir. Yesterday i got same model stabilizer with same problem. And when i physically inspected the pcb, the same transistor was burnt.
Hi sir, the transistor can be replaced and please do check if any tracks and or resistor are open.
Thank you for watching the video and making time to comment.
Have a GOODTIME.
@@GOODTIMEStech sir ji will you give me your contact no?
@@GOODTIMEStechcan u Pl send me the name / No of the transistor to buy the same.
@@lincolng1904 transistor number is D882
Thank you, have a GOODTIME...
My stabilizer showing only input red light and output there is no light what is the issue??
Need to check the transistor that was dry solder as shown in the video, if faulty, it needs to be replaced and if it is good then need to trace the fault further...
D882. Transistor, i changed today.
My v guard stabilizer input output voltage same dikha raha hai
What is the voltage you are getting ?
Thank you, have a GOODTIME....