I find when it comes to fluids, Flow rate is king. I set up a tank at the end that I can flush, this is needed to keep the consumption rate from slowing down the flow rate. Then I compare the flow rate to the oil extractors max speed at, 25:50 for example, the pipe is half empty so looks bad but the oil is flowine at max speed (120) so no need to worry it's just filling the forward pipes and tank back there.
I don’t think you want max headlift, I believe that shows how high it can lift the fluid, you need to be checking out flow rate and how much oil your pumps are producing Also make sure the pumps aren’t on backwards
same here lol xD I already unlocked tiers 5 and 6 and the second spot of starting area in forest (one with bunch of grass and woods, te first is like on the cliff side with 4 pure nodes very close to each other, the "2nd" is with 6 nodes but one is occupied with boulder) is my "2nd" factory xD i was using it only just for smart plating, some rotors and reinforced iron plates XD But now im rebuilding it, make it a smelt area (initialy 5 miners mk2 with mk3 belt feeding 40 smelters = 1200 iron ingots per minute) and bring everything to "main base" then reforge it to reinforced iron plates, stators, rotors, the "qubes" (forgot the namme lol XD) and other stuff. Main issue rn are versatile frameworks (requires stators and rotors i thinkand then the 5 and 6 tier parts. And its just only with 3 main nodes at start area, the fourth one goes to producing encased industrial beams cause i might need them in future XD The one near coal goes to steel (pipes and beams initialy) and the 5 i've mentoined will go firstly to the base, then i'll decide, i need steel rodes and plates for now tbh XD ... And im so dumb and played only like ~200hrs so still a newbie and actually don't know how to propely plan my base so everything looks like a fuc*** mess ;x AAAAAAAAND i'm too dumb to explain things in few words. Lol. Sorry if you even read that all XDD Peace !
Bro would you be kind enough to share your save file?????I don't have the time to go through the hassle of starting from the beginning....and haven't figured out how to use save editor.......please🙏🙏🙏🙏🙏🙏
I remember noticing from some other videos that the water extractor itself has a 10 m headlift. The first 'pipeline pump' of the top pipeline might need to be placed lower. It appears that getting close to the max headlift might cause the pipe to not fill completely in the next stretch, and that loss is cumulative. I am not sure what effect having an extra tank might have in that route.
Yeah, he said he understood head lift, but actually didn't understand it at all. He wanted more head lift, when the important thing is just to be under the max.
Yelling at my computer screen. USE THE PIPES THE GO STRAIGHT UP! STACK THEM. HOOK EVERYTHING UP FIRST, THEN WORRY ABOUT HOW MANY PUMPS YOU NEED WHEN THE END UNIT IS STARVED. I'm over it now though. ;)
Its unbelivable how short his attention span is. He got the right idea on the first 10m putting down the pipes, after that he completly blacked out. Why is he putting pumps in places where he is not elevating fluid 1inch. Also is he awaiting instant fluid movement its not like that each segment he is inspecting is telling him that there is storage that needs to be filled somehow in the first place. Its like conecting a 2km long MK1 belt and once you power up the miner he expects instant delivery.
@@jclcoolrunner Yeah buts not hard to understand at all. Just place down a conveyor and enclose it with walls, put on the machine. Its the same basic movement. Just because you can't see it dosen't mean its not moveing. He just needs to watch more carefully. Read the information giveing, observe the situation and than do what ever it needs to be done after. It's like back in the military, think, press, talk in this order. Built, watch, act. But he is acting before he watches and does all kind of "stupid" things inbetween.
The oil pumps should be able to pump 20m high. You should only have to place a pump every 20m in pipe elevation. No pumps are needed when the pipe is level.
Stop acting like a maniac when you connect a pipe. Pipes are gloryfied conveyor belts. It needs TIME to move fluid!. Connect - Observe - Act accordingly! You jump from one section to another one inspecting stuff for 2milliseconds and act with false information therefore.
Yeah, when building pipes, let the pressure fill up the pipes until the flow rate is 0m3/sec so you know exactly how far up your head lift actually goes, then if needed add pumps to the bottom of wherever you’re trying to get up to. Long flat runs just take a long time to fill up and max out pressure, but shouldn’t actually require any additional pumps.
That location has two each normal (120/min) and impure (60 per minute) nodes. I suspect your problems with the top line are because its fed from one of the impure nodes.
He could also combine at least two of the pumps into one pipe and save power by using less pumps. But this guy doesn't seem to bother with basic math or he'd realize all of this before doing going through all this effort.
I'd put buffers at the bottom near the extractors. Ensuring a less interrupted flow. Then I'd go a little more vertical with pump stations at around 18-19 meter intervals.
Someone on reddit did some testing It appears the ideal spacing is every 16m vertical increase. More than that and the flow rate decreases significantly, less than that and you're just sucking down power with no gain The "head lift" shown on a pump won't go above the distance to the next pump, so if you only have 9m vertical rise the pump will only ever show "9m"
Pipes transport 300m3 so you can combine the oil pumps to fulfill 1 pipe... Like you can do 2 pumps that pump 120m3 per minutes each and 1 pump that does 60m3 per minute you can connect all that to 1 pipe and save space xD
I know this must have been figured out by now, but maximum head lift is how far up the pump needs to lift the liquid. It tops up at: A) 20m, if pipes keep going higher (if more is required it will show it) B) reaches to topmost pipe in the sequence ahead C) reaches the next pump/consuming building Whichever is higher (in case of pipe splitting) And pipes fill up segment by segment, basically
Wouldnt it be easier at this point to just barrel the oil and use conveyor belts? You can empty the barrels at the destination and reuse them. Even though it would need two conveyor lines I feel like it is more efficient this way. At least powerwise
Z1 - I love this channel but the Streaming on Twitch thing is frustrating. If the streams were on TH-cam and recorded, or recorded from twitch and uploaded here, I could watch them after the fact and not have huge holes in the flow of the stories being told. Would also net you more views, seems like a win win. I wont stop watching your content because you are genuinely great, just my two cents.
I had massive issues in my save because my fuel gens was running dry, I was confused on why it was the case.... I went to my pipes.... and appearantly, you need them really spaced depending on the lift, angle and so on...... so yes, if you have a trun on the oil, that is going to do something with the pumping
have you considered that there might be a stack height limit as to how high you can stack the pipes be pressure is affected no matter how many boost pumps you place in the line to increase pressure
Since it's the the top pipe that's the problem, this would be my suggestion: go to four extractors for a total of four pipes, and only stack the pipes two high.
You need to wait until the pipes build thier pressure... Also you can merge 3 pipes into 2, as long as the total flow of the 2 tubes is more than the flow of the 3 pumps. It will auto divide with pressure, there is no need to load balance a pressure system, it will do it by itself. Also, you get less head lift when you have put another pump too close above it, raise the pump above it by the difference you want in head lift
@Z1 Gaming the amount of liquid in a pipe doesn't mean anything, you should be looking at the flow rate in the pipe. The flow rate is how much liquid is flowing thru the pipe(should match how much the oil/water pumps attached to pipe are supplying, to max 300 for one pipe line). if 3 oil pumps at 120 for 360 oil, pipe can support 300(wasting 60) just need to look at pressure gauge on pipes to see where not enough then add pressure pump(will take a little bit of time pressure to get up to speed). Also don't look at pressure pump info as that is no accurate
@@HeRoXLeGenD1 why should i? I look on the recipe and build accordingly. Building Supercomputers now and have the tiny amount of 3 full crude oil pipes running - for the start :-)
Just a thought, Gravity is a cow so why take your oil up to the water? Drop the water down to the oil and just run the oil along the valley. Not sure if that is how it works in game but makes sense to me. If the game takes into account viscosity then oil should be harder to pump than water. Like I said just a thought.
There are so many better solutions. You can package up the fuel as well, so he could just have a crude oil barreling system down at the bottom and conveyor or truck the barrels up.
Why not use foundation’s and ramps to get over the mountain? Then deconstruct them when you don’t need them. You have infinite resources but you still go back and forth to the same work bench make 20 of them and spread out or use one wherever you are and deconstruct it
One suggestion, make your ramps/roads two wide so you have a bit more room to work. Stacking is fine but will only get you so much leeway. Or at least that's been my experience.
dude, you are working against the gravity, build the pipe straight up, not diagonally up the slope, the slope is practically sliding your oil back down due to gravity and potential energy.
*@Z1 Gaming* 8:00 ish. Or you know, you can just bring the ITEMS TO the oil since you don't have to care about elevation for items,then just do all the processing where the oil is until you get items again, then just send the items back again.
the flowrate is more important than how full it is. as the flowrate will slow when full giveing false info on how good the flowrate will be as if there any flowrate it will fill at some point.
you are now because of him. There is clearly said - initialy the first pump (water extractor or oil refinery) can pump fluid up in 10 m at max. if you stack a foundations that are 4m high, you'll need a pump at the third one, best place will be in the middle of 2nd and 3rd. Now, the pumps that are clipping on pipe, can extend this flow, up in 20meters VERTICALY. This does not apply as phisics from the "/" (forgot the formula for the "/"kinda diameter XD and the name of it lol ... the diagonal meter ? maybe, i dont remember ... im sorry :c ) its just 20 meters at max. So - first pump between 2nd and 3rd foundation, then next one at between 6th and 7th and excetera excetra. If it goes downwards, you dont need any pumps, or if it goes flat. AND, as seen in pump, if it says "head lift 20m" its "max", if you see "1m" 5 10, 12 etc its totaly ok because you dont need the second right next to it, you just have to measure where the 16th meter is and throw a pump there. I might record a vid today of that and shove it as my first one on channel, so you kinda mind checking that out later, pm me or answer this so could see if youre intrested. the vid might be basicaly in polish, but ill make the english subtitles aswell or inversely. But i dont actually know if i gonna record it. Im just terrified of recording anything, talking on vid, wait for ppl to react on it etc XD ... Btw i hope the first part of my answer would be any help. Hope you understand. Good luck with your pipes :)
@@jasonbayer2452 well with a belt you get throughput with a pipe you have back flow, tough effect, elevation complications and throughput. that is all assuming the programing is faultless which took years for Factorio to perfect even without a z axis, you want a 50:50 split? good luck short of putting a pump one every segment anything can happen
I think the devs added in that cyberwagon as a goof thing 1 as a play on the cyber truck demo with elon musk and the broken windows and as an A.I. that developed its first vehicle is a play on how ai really cant design too well with the square wheels the character under the chassis and it requires fuel... yes its useless as tits on a turbo but i think its perfect as a play on so many things if i can name two things the devs outdid themselves on 1 being the doggo like who doesn't love those cute little assassins tryingto give you nuclear waste!?! You cant stay mad at the little guys lol and 2 is the cyberwagon just as pure comedy i think its perfect but the whole game is perfect in my opinion lol
I find when it comes to fluids, Flow rate is king. I set up a tank at the end that I can flush, this is needed to keep the consumption rate from slowing down the flow rate. Then I compare the flow rate to the oil extractors max speed at, 25:50 for example, the pipe is half empty so looks bad but the oil is flowine at max speed (120) so no need to worry it's just filling the forward pipes and tank back there.
I don’t think you want max headlift, I believe that shows how high it can lift the fluid, you need to be checking out flow rate and how much oil your pumps are producing
Also make sure the pumps aren’t on backwards
You have to remember the oil pumps only give you 120 m^3/minute so it does take time to fill the pipes.
Everyone: SOURCE -> TO main factory...
Me: Multiple mini-factories around sources...
same here lol xD I already unlocked tiers 5 and 6 and the second spot of starting area in forest (one with bunch of grass and woods, te first is like on the cliff side with 4 pure nodes very close to each other, the "2nd" is with 6 nodes but one is occupied with boulder) is my "2nd" factory xD i was using it only just for smart plating, some rotors and reinforced iron plates XD But now im rebuilding it, make it a smelt area (initialy 5 miners mk2 with mk3 belt feeding 40 smelters = 1200 iron ingots per minute) and bring everything to "main base" then reforge it to reinforced iron plates, stators, rotors, the "qubes" (forgot the namme lol XD) and other stuff. Main issue rn are versatile frameworks (requires stators and rotors i thinkand then the 5 and 6 tier parts. And its just only with 3 main nodes at start area, the fourth one goes to producing encased industrial beams cause i might need them in future XD The one near coal goes to steel (pipes and beams initialy) and the 5 i've mentoined will go firstly to the base, then i'll decide, i need steel rodes and plates for now tbh XD ... And im so dumb and played only like ~200hrs so still a newbie and actually don't know how to propely plan my base so everything looks like a fuc*** mess ;x AAAAAAAAND i'm too dumb to explain things in few words. Lol. Sorry if you even read that all XDD Peace !
I fecked mine up so badly and it’s too unsustainable to fix
Bro would you be kind enough to share your save file?????I don't have the time to go through the hassle of starting from the beginning....and haven't figured out how to use save editor.......please🙏🙏🙏🙏🙏🙏
Komandor Karp um woah
I remember noticing from some other videos that the water extractor itself has a 10 m headlift. The first 'pipeline pump' of the top pipeline might need to be placed lower.
It appears that getting close to the max headlift might cause the pipe to not fill completely in the next stretch, and that loss is cumulative. I am not sure what effect having an extra tank might have in that route.
Yeah, he said he understood head lift, but actually didn't understand it at all. He wanted more head lift, when the important thing is just to be under the max.
Don't you love how Satisfactory is roasting the cybertruck by naming it cyber wagon and the mirror cracked. Also it requires fuel not electricity! 😂😂😂
TheFrtntBoss you can use the batteries in it to so its à hybrid
@@locis_ok True
square wheels
TheFrtntBoss h
@@borger8045 BRO IT HAS BULLET PROOF GLASS!!!
*Throws baseball*
*Shatters*
WELP
Yelling at my computer screen. USE THE PIPES THE GO STRAIGHT UP! STACK THEM. HOOK EVERYTHING UP FIRST, THEN WORRY ABOUT HOW MANY PUMPS YOU NEED WHEN THE END UNIT IS STARVED. I'm over it now though. ;)
So much yes on this comment!
Its unbelivable how short his attention span is. He got the right idea on the first 10m putting down the pipes, after that he completly blacked out. Why is he putting pumps in places where he is not elevating fluid 1inch. Also is he awaiting instant fluid movement its not like that each segment he is inspecting is telling him that there is storage that needs to be filled somehow in the first place. Its like conecting a 2km long MK1 belt and once you power up the miner he expects instant delivery.
@@wylander5433 Some people don't understand basic fluid dynamics at all. It's funny to me.
@@jclcoolrunner Yeah buts not hard to understand at all. Just place down a conveyor and enclose it with walls, put on the machine. Its the same basic movement. Just because you can't see it dosen't mean its not moveing. He just needs to watch more carefully. Read the information giveing, observe the situation and than do what ever it needs to be done after. It's like back in the military, think, press, talk in this order. Built, watch, act. But he is acting before he watches and does all kind of "stupid" things inbetween.
The oil pumps should be able to pump 20m high. You should only have to place a pump every 20m in pipe elevation. No pumps are needed when the pipe is level.
Love the video! Keep uploading satisfactory! Also if you use the blade runners jump and slide to move faster
Pumps push, not pull.
To move a fluid up an incline, you need to place the pump at the bottom of said incline
Stop acting like a maniac when you connect a pipe. Pipes are gloryfied conveyor belts. It needs TIME to move fluid!. Connect - Observe - Act accordingly! You jump from one section to another one inspecting stuff for 2milliseconds and act with false information therefore.
more over try adding the pumps at the beginning of the pipe rather than the end........
@@gursimrankochar7270 Yeah thats the result of his quick accesment of information.
Yeah, when building pipes, let the pressure fill up the pipes until the flow rate is 0m3/sec so you know exactly how far up your head lift actually goes, then if needed add pumps to the bottom of wherever you’re trying to get up to. Long flat runs just take a long time to fill up and max out pressure, but shouldn’t actually require any additional pumps.
He is stupid
I don’t wanna touch that beautiful number but I do like this post
26:10 Max Headlift, lesser-known brother of Max Headroom
are you aware that pumps are directional and direction is chosen on how the pump is rotated when you build it?
That location has two each normal (120/min) and impure (60 per minute) nodes. I suspect your problems with the top line are because its fed from one of the impure nodes.
He could also combine at least two of the pumps into one pipe and save power by using less pumps. But this guy doesn't seem to bother with basic math or he'd realize all of this before doing going through all this effort.
I'd put buffers at the bottom near the extractors. Ensuring a less interrupted flow. Then I'd go a little more vertical with pump stations at around 18-19 meter intervals.
Someone on reddit did some testing
It appears the ideal spacing is every 16m vertical increase. More than that and the flow rate decreases significantly, less than that and you're just sucking down power with no gain
The "head lift" shown on a pump won't go above the distance to the next pump, so if you only have 9m vertical rise the pump will only ever show "9m"
I really enjoy your videos Z! Continue uploading Satisfactory!!! 😄
Pipes transport 300m3 so you can combine the oil pumps to fulfill 1 pipe... Like you can do 2 pumps that pump 120m3 per minutes each and 1 pump that does 60m3 per minute you can connect all that to 1 pipe and save space xD
I know this must have been figured out by now, but maximum head lift is how far up the pump needs to lift the liquid. It tops up at:
A) 20m, if pipes keep going higher (if more is required it will show it)
B) reaches to topmost pipe in the sequence ahead
C) reaches the next pump/consuming building
Whichever is higher (in case of pipe splitting)
And pipes fill up segment by segment, basically
How do you get the pipe support to tilt rather than rotate?
13:53 "So this is supplying (whistle) Head lift" ..Wut?
Wouldnt it be easier at this point to just barrel the oil and use conveyor belts? You can empty the barrels at the destination and reuse them. Even though it would need two conveyor lines I feel like it is more efficient this way. At least powerwise
Or truck it up, he already has a huge infrastruction of platforms.
You dont even give the pipes time to fill up lol
I love how you have a caterium factory, have infinite caterium, and you still use Mark I poles.....
Z1 - I love this channel but the Streaming on Twitch thing is frustrating. If the streams were on TH-cam and recorded, or recorded from twitch and uploaded here, I could watch them after the fact and not have huge holes in the flow of the stories being told. Would also net you more views, seems like a win win. I wont stop watching your content because you are genuinely great, just my two cents.
can you not watch twitch vods?
@@RexDeorumYT to be fair twitch boss are aids.. u get an ad every 10 to 15 min... Super annoying especially on mobile
@@cmrs521 Ah I've always used adblock so that's never affected me
Just twitch stream and record also, then edit it and upload it go youtube... It is indeed frustrating
I had massive issues in my save because my fuel gens was running dry, I was confused on why it was the case.... I went to my pipes.... and appearantly, you need them really spaced depending on the lift, angle and so on...... so yes, if you have a trun on the oil, that is going to do something with the pumping
When you get nuclear power use the AWESOME sink to eat the nuclear waste
In the developers live streamed they said that the awesome sink will not take nuclear waste
it will not accept the NW
That would be way to easy
@@Dartheri oh ok that sucks but it was a good idea
@@sp4ceraptor373 yep. It would have been very convenient be able to do that.
Imagine if it acepted but it made the ticket like 5000 points more expensive
Hey z1 how did you get the visor you use in astroneer
From the looks of it you probably need a full pipe to attach the pump to in order to get flow
The Cyber Wagon was probably just a meme schematic
whats the flush for
you could try using the train/ truck to moving the oil to the level parts???
have you considered that there might be a stack height limit as to how high you can stack the pipes be pressure is affected no matter how many boost pumps you place in the line to increase pressure
Why don't you place the buffer tank near the oil pump
Try launching it, it’s made to make you get around big factory’s by being bounce padded!
Bounce pad plus cyber wagon equals boom
Since it's the the top pipe that's the problem, this would be my suggestion: go to four extractors for a total of four pipes, and only stack the pipes two high.
You need to wait until the pipes build thier pressure... Also you can merge 3 pipes into 2, as long as the total flow of the 2 tubes is more than the flow of the 3 pumps. It will auto divide with pressure, there is no need to load balance a pressure system, it will do it by itself. Also, you get less head lift when you have put another pump too close above it, raise the pump above it by the difference you want in head lift
@Z1 Gaming the amount of liquid in a pipe doesn't mean anything, you should be looking at the flow rate in the pipe. The flow rate is how much liquid is flowing thru the pipe(should match how much the oil/water pumps attached to pipe are supplying, to max 300 for one pipe line). if 3 oil pumps at 120 for 360 oil, pipe can support 300(wasting 60) just need to look at pressure gauge on pipes to see where not enough then add pressure pump(will take a little bit of time pressure to get up to speed). Also don't look at pressure pump info as that is no accurate
You can combine the 3 into one pipe making your life easy or do 2 to 1 pipe I know there’s 4 oil spots over there
These three pumps would exactly have filled one pipe... (they extraced 300m3 combined)
Markus Stich don’t do the same mistake which I did the same and 300m3/min is not enough for computer because of the plastic.
@@HeRoXLeGenD1 why should i? I look on the recipe and build accordingly. Building Supercomputers now and have the tiny amount of 3 full crude oil pipes running - for the start :-)
@@HeRoXLeGenD1 Just get the alternate which is far superior
Yeah! I was screaming to use one pipe or 2 max (if overclocked)
Just a thought, Gravity is a cow so why take your oil up to the water? Drop the water down to the oil and just run the oil along the valley. Not sure if that is how it works in game but makes sense to me.
If the game takes into account viscosity then oil should be harder to pump than water.
Like I said just a thought.
First - yes, it works like that, and second - no, its just called "fluid" so it behaves the same regarless if its oil, water, acid or other.
There are so many better solutions. You can package up the fuel as well, so he could just have a crude oil barreling system down at the bottom and conveyor or truck the barrels up.
Love the satisfactory series
LoL The cyber wagon looks so cursed!
Why not use foundation’s and ramps to get over the mountain? Then deconstruct them when you don’t need them.
You have infinite resources but you still go back and forth to the same work bench make 20 of them and spread out or use one wherever you are and deconstruct it
If you ever did a time lapse the original song form the lorax work perfectly it's called biggering
They added a middle-click to select what you're looking at when building??? That is an absolute game changer.
travis scott
cant you make the 3 oilpumps in 1 pipeline ?
when in doubt just put as many pumps on the pipes as possible
Set a conveyor belt to the space elevator so you don’t have to manually put it in yourself
Go to the cave later before the core of The gas planet in Astronear
In tier 7 you need to do stuff alot and you need to unlock the stuff but it have alot help like miner mk 3 conveyor mk 5
One suggestion, make your ramps/roads two wide so you have a bit more room to work. Stacking is fine but will only get you so much leeway. Or at least that's been my experience.
dude, you are working against the gravity, build the pipe straight up, not diagonally up the slope, the slope is practically sliding your oil back down due to gravity and potential energy.
Wait... (7:20) Oil deposit... in shallow WATER?!? 🤯 Why is there oil on water? That’s dangerous!
*@Z1 Gaming*
8:00 ish. Or you know, you can just bring the ITEMS TO the oil since you don't have to care about elevation for items,then just do all the processing where the oil is until you get items again, then just send the items back again.
add pumps along the entier pipe
Why don’t you just transform them into oil barrels, and put the, on conveyers? Doesn’t that work?
the flowrate is more important than how full it is. as the flowrate will slow when full giveing false info on how good the flowrate will be as if there any flowrate it will fill at some point.
Cyber wagon: either epic troll or 1st year design student.
Both!
@@Eatongee I like your thinking...
What if you flush all the pipes because it did good for the first one
Just place a lot of pumps in stead of replacing them somewhere else
try flushing the lines behind every valve
Would it not be easier to just bring the water all the way down?
I think pumps push fluid, they don't pull.
u could use batteries for ''fuel'' in the cyberwagon lulw
maybe 1pipe line?
patience dude!
Please solve the mistery of the piping i'm more confused than you
you are now because of him. There is clearly said - initialy the first pump (water extractor or oil refinery) can pump fluid up in 10 m at max. if you stack a foundations that are 4m high, you'll need a pump at the third one, best place will be in the middle of 2nd and 3rd. Now, the pumps that are clipping on pipe, can extend this flow, up in 20meters VERTICALY. This does not apply as phisics from the "/" (forgot the formula for the "/"kinda diameter XD and the name of it lol ... the diagonal meter ? maybe, i dont remember ... im sorry :c ) its just 20 meters at max. So - first pump between 2nd and 3rd foundation, then next one at between 6th and 7th and excetera excetra. If it goes downwards, you dont need any pumps, or if it goes flat. AND, as seen in pump, if it says "head lift 20m" its "max", if you see "1m" 5 10, 12 etc its totaly ok because you dont need the second right next to it, you just have to measure where the 16th meter is and throw a pump there. I might record a vid today of that and shove it as my first one on channel, so you kinda mind checking that out later, pm me or answer this so could see if youre intrested. the vid might be basicaly in polish, but ill make the english subtitles aswell or inversely. But i dont actually know if i gonna record it. Im just terrified of recording anything, talking on vid, wait for ppl to react on it etc XD ... Btw i hope the first part of my answer would be any help. Hope you understand. Good luck with your pipes :)
welcome to the misfortune that is fluid dynamics and exactly why I hoped the "sactisfatory is almost perfect but pipes" meme died hard
Could you explain a bit on the fluid dynamics part?
@@jasonbayer2452 well with a belt you get throughput
with a pipe you have back flow, tough effect, elevation complications and throughput. that is all assuming the programing is faultless which took years for Factorio to perfect even without a z axis, you want a 50:50 split? good luck short of putting a pump one every segment anything can happen
Combine the pipes
But the cyber wagon can fly great!
this might be a dumb request but can you share your save file?????.....
I need to power my pipes to get the water flowing to power my coal power but the circuit overloads ?!??!
Turn a few of your production buildings off until you get the pipes ran.
Zorlac I did but they are the only ones on maybe I need to disconnect the power to the coal plants as well
Fluid is hard for some...
The water in top off the muntan dosent work it Will kill you and you Will lose your stuff
Reduce to a single pipe
And alumunium
Why did you upload late today
I think the devs added in that cyberwagon as a goof thing 1 as a play on the cyber truck demo with elon musk and the broken windows and as an A.I. that developed its first vehicle is a play on how ai really cant design too well with the square wheels the character under the chassis and it requires fuel... yes its useless as tits on a turbo but i think its perfect as a play on so many things if i can name two things the devs outdid themselves on 1 being the doggo like who doesn't love those cute little assassins tryingto give you nuclear waste!?! You cant stay mad at the little guys lol and 2 is the cyberwagon just as pure comedy i think its perfect but the whole game is perfect in my opinion lol
Btw TO MUTCH HEADLIFT IS NOT GOOD! KEEP IT AT MAXIMUM 17
Love your videos so do my kids!!! But when are we gona see some more planet nomads,?
Ooooyeeeaaaahhhh
Tried to tell him it wasn’t worth it
Stop running to and back from the oil to factory, try using a factory cart, you have a few...
Top 10
Hey z
Where is subnautica
then delete the lowest head lifting pipes
More subnatica please you need to do ep8
i dont know why he doesnt just combine tham all
I'm number 800! Wahoo!
CSS have not in any way shape or form been inspired by Tesla at all... nope... how can you think something like that...
its the russian version :D
the new update is insane, im not going to work cuz of it XD
now i have to tell to my boss why i was missing :)))
Hello
You really don't have patience do you? Just give the pipes time to fill insteat of spaming pipe pumps
hey Z! looks not to sound bad but looks like im first!
So I don’t watch any of your vids but Astroneer, Raft, and sunshine Nautical so when we going to see some of those videos..
This was painful to watch.
First comment shout out plz
You are the 4th comment.
Timothy Nelder check again