Next time you can go to the master controller and connect over there so you will not be cold. It is a great video with a lot of information thanks brother.
Thank you for this video. It’s not easy to film while troubleshooting at the same time. Specially at lower temps. I saw the problems highlighted by the software that you pointed out. However, I was curious to see how you came up with a solution to the problem/s that you found in that application. I will keep following what you do and have done to keep diving into vrf.
Thanks for watching, this video was filmed a while back so I don't remember the outcome however I may have other videos in my mitsubishi vrf playlist with the answer. Check it out
hello,thank you for this useful video.may i get the standard values of all for normal operation?i mean values for TH2,TH3,frequency etc.for normal operation.
I’m an apprentice at the moment. Me and my lead recently installed one of these. The line by the EEV was freezing up after adding 84 pounds of refrigerant. I noticed when he was taking out valve core moisture was making its way into the copper lines. Could that cause the line to freeze up?
Can you use the PAC-USCMS-MN-1 tool as well to make the connection between the PC and Unit? Great Video. BTW I have these units and am tired of techs not knowing what they are doing. Thanks for your hard work and for doing it right. Sharing good info is essential as trades are dying.
Hi I love you tutorial videos very educational and informative. I am looking to get mitsubishi electric service checker software is there anyway i can download it online? Thanks.
Go to www.mylinkdrive.com and select your country, then click on software and scroll to the bottom of the page there you will find the maintenance tool software
This tool works on any mitsubishi city multi that has the M-Net communication ie if you have a system using 3 wire communication and power /line voltage combination ( mini splits) it won't work unless it's a P series and you install the Mnet adapter on the outdoor unit
Alright thanks man and thank you for the quick reply. Im working on mostly M series so I guess its just going to be the remote control error recall then. @@D2DNYAC
The software is free and accessible to all via the internet and for converter you have to be a hvac contractor for most venders however you can find some who will sell to non hvac contractors
Hello friend that should be an automatic process on a windows pc!! All you need to know is what com port number windows assigned to the maintenance tool
Why you killing yourself bro. You could have just hooked up to one of the branch boxes or one of the many other units inside the building and stay warm and still done the same job
@@D2DNYAC the struggle is real. The only time I have to be cold is when I'm working in an industrial freezer other than that there's no reason for it. We are gentlemen they treat us like animals
Next time you can go to the master controller and connect over there so you will not be cold. It is a great video with a lot of information thanks brother.
Great video, first time working with maintenance tool.
Dude!!! Thank you. I sorry you were in the cold 🥶 but could be worse, it’s gonna hit 109 today in AZ. Good video!!!
Thank you for stopping by
Thank you for this video. It’s not easy to film while troubleshooting at the same time. Specially at lower temps. I saw the problems highlighted by the software that you pointed out. However, I was curious to see how you came up with a solution to the problem/s that you found in that application. I will keep following what you do and have done to keep diving into vrf.
Thanks for watching, this video was filmed a while back so I don't remember the outcome however I may have other videos in my mitsubishi vrf playlist with the answer. Check it out
Thanks you.
You saved my day. I was having trouble connecting the tool via usb.
Thank you for stopping by
hello,thank you for this useful video.may i get the standard values of all for normal operation?i mean values for TH2,TH3,frequency etc.for normal operation.
Great bvd man. Thanks
Thank you for stopping by
How do you place system in Refrigerant Adjust Mode .... Great Video
Now I see why the equipment is close to the edge...damn sitting area for tenants. Bad idea. Thxs for the vids.
I’m an apprentice at the moment. Me and my lead recently installed one of these. The line by the EEV was freezing up after adding 84 pounds of refrigerant. I noticed when he was taking out valve core moisture was making its way into the copper lines. Could that cause the line to freeze up?
Unlikely,,,, most likely faulty or restricted valve
Thx excellent video u help me understand to use my tools . If you have time to show me how to save and send data Thx
Okay ...what state are you in?
very nice thank you for posting
Thanks for stopping by
Hey great video, did you find out why th3 was reading low and why the discharge pressure was low ?
System was 30 lbs low on refrigerant charge
Greetings, please explain how to check numbers of indoors on outdoor units
Okay video coming
Can you use the PAC-USCMS-MN-1 tool as well to make the connection between the PC and Unit? Great Video. BTW I have these units and am tired of techs not knowing what they are doing. Thanks for your hard work and for doing it right. Sharing good info is essential as trades are dying.
Hey thanks for watching, I don’t understand what you are asking!
Do you know what link is used here?
Thank you for your vids! Can you make a video how to program each unit?
What do you mean by that?
Thanks very much bro
Just subscribed nice video bud
Thank you
Hi I love you tutorial videos very educational and informative. I am looking to get mitsubishi electric service checker software is there anyway i can download it online? Thanks.
Go to www.mylinkdrive.com
What version of windows are you running? Couldn’t get my windows 11 to connect to this older style maintenance tool but newer one worked
I had a similar problem with trying to use the newer tool with older version of windows ,, windows 8 on this computer!
I tried with VPN did work, any Idea how much conventer will cost?thank you
About 400$ US
TB3 for VRF OR M1 WHITE &M2 RED conector?
Please can you explain how to adress indoor units and how to check adress of indoors.thanks
By the rotary dial switches
Thanks for sharing it, great video! Where did the leak occurred?
Inside outdoor unit
@@D2DNYAC those condensers notorious for leaking
@ryan Malin thanks for stopping by
Obviously it was cold out, why didn't you hook up to the indoor unit?
Once you're connected to M-net you're connected, go inside where it's warm!
@Zen 😂 great idea, there’s only one problems the unit serves multiple residential apartments and getting into an apartment is very political 😂
M net isn’t on ma stats my guy so not always and branch boxes have m net but who wants to stand on a ladder with a laptop
Hey do you have any idea where I can get a short cut to learn building automation software on the fly
No
Great video, thank you for sharing!! i can't find the link for the software download. Can you provide one?
Go to www.mylinkdrive.com and select your country, then click on software and scroll to the bottom of the page there you will find the maintenance tool software
@@D2DNYAC It seems I can't acces the link from outside the U.S.A. I'll keep trying and let you know. Thanks
Hey D2D will this tool work on M & P series equipment?
This tool works on any mitsubishi city multi that has the M-Net communication ie if you have a system using 3 wire communication and power /line voltage combination ( mini splits) it won't work unless it's a P series and you install the Mnet adapter on the outdoor unit
Thanks for stopping by
Alright thanks man and thank you for the quick reply. Im working on mostly M series so I guess its just going to be the remote control error recall then. @@D2DNYAC
How do you code out faulty vrf unit(slave) please?
Oooh 😎 interesting question ! I will find out, don’t even know if that’s even possible
Hi, please , HOw i Can Get software, MANTENCE TOOL?
Get it here Www.mylinkdrive.com
Hi, Can you buy this converter & software? Or is it restricted to approved installers?
The software is free and accessible to all via the internet and for converter you have to be a hvac contractor for most venders however you can find some who will sell to non hvac contractors
Could you get connected inside the building?
Sure you can!
Hello! I'm from Brazil, where i can buy this converter??
Online or at an hvac supply house
Great thank you but software link shows error.
Go to www.mylinkdrive.com and select your country then click software to get it
What's the link to the maintenance for this?
Www.mylinkdrive.com
how can i get the software please? bought for hundreds of dollars but i found no software in the box. tryed my link but couldn/t work
What country are in?
@@D2DNYAC malta
LinkDrive@hvac.mea.com send email here and ask for it
Under operation IC what’s transmit? And where to get the software? Thanks
That is to send or transmit the changes you have made in the maintenance tool software from your computer to the system
Go to www.mylinkdrive.com
Look under controls/ software
Where can I find that cms-mng box ?
Not quite sure 🤔 however if you are in the US it’s Trane hvac supplies
The laptop on the edge of the wall gives me anxiety 🤣
Lol🤣
Sir how do you configure your ports I can’t get passed that
Hello friend that should be an automatic process on a windows pc!! All you need to know is what com port number windows assigned to the maintenance tool
Go to device manager on your computer you will find the answer there
@@D2DNYAC thank you sir
Thanks for watching
You have Lg software?
yes
Hi, there
Could you please share where can I get this maintenance software?
Go to www.mylinkdrive.com and look under software
Hi Bro, link is not working. I would greatly grateful to you if you could PM me the file? Thank you in advance.
What country are you in?
@@D2DNYAC
In Singapore. I have checked they don't have it in Singapore.
LinkDrive@hvac.mea.com send email here for assistance
Como puefo contartame con ustedes
No habla Español
The Maintenance tool works on MacBook ..??
Hello go here www.mylinkdrive.com to find out
No, it doesn’t. Only for Windows.
How to fix 1302 error?
It looks like a system operating pressures related error! What model are you working on?
Why you killing yourself bro. You could have just hooked up to one of the branch boxes or one of the many other units inside the building and stay warm and still done the same job
😆😆😆😂 dude come on I wish
That was an apartment building with people either not home or don't want to be intruded upon
@@D2DNYAC LOL I guess I'm a rude servicetec cuz I want to say guess what knock knock I'm coming in you want it fixed
@@D2DNYAC the struggle is real. The only time I have to be cold is when I'm working in an industrial freezer other than that there's no reason for it. We are gentlemen they treat us like animals
Can you bless me with your cheat sheet?
😆 🤣
I will do another video in the future explaining readings and acronyms on the maintenance tool