How to activate Real view graphics in Solidworks 2024

[@AngeloCarolloSolidWorks]

I have solidWorks 2024 and Nvidia rtx 4090...I just followed your step and it works....first time.....incredible !! 🙂

[@qittfthegame6128]

It doesn't work for me. How?

[@enzosangio5582]

@@qittfthegame6128 Remember also to activate "Enhanced graphics performance" under Settings/Performance tab

[@ivobouwman8114]

To my supprise this actually worked. Great video!

[@DavidCook-w1y]

Thank you !!!!! SO MUCH!! I have a Lenovo 7i Legion with NVIDIA GTX4060 and I just bought Solidworks 2024 and now RealView works !

[@metronoming]

Just followed your steps and now I have RealView too! Thank you!!

[@strikereureka2618]

Thank you! It worked!
31408 worked for my RTX 4070 in my legion Slim 5

[@andrewzhang1290]

"you must enable "Enhanced graphics performance(requires SolidWorks restart)" and "Hardware accelerated silhouette edge" under the performance tab in the settings and scroll to the bottom" - after also doing what was described in the video, and it worked. using nvidia RTX 4050 laptop GPU, SolidWorks 2024

[@jeromeforonda2752]

Shoutout you man! Followed the vid and I was able to get real view graphics! Forever a legend in my book.

[@PiyasKheyal]

great it works. By the way who have AMD graphics card create the new key in RV420 instead of NV40.

[@dgrigor1602]

thanks for comment it solved my problem

[@Isoldi.]

Gracias me sirvió , Radeon RX 570 Series , 32408

[@jadecaer7590]

Thx, you save me! AMD Radeon RX 7800 XT with 30008

[@al3xmusic671]

@@Isoldi. MIL GRACIAS!

[@АлексейГрищенко-д5и]

THANK YOU!!! Worked first time with Solidworks 2024 and an AMD Radeon

[@derKameramann]

Thank you very much, its working like a charm. NV 1080 here.

[@anbuithien6345]

Wow!! It actually works. Thank you so so so much sir, you have made my day!

[@seancleary3223]

Awesome, worked on my 2080 Super, was worried it was too old but this did the trick. Make sure to rename the file "Workarounds" not "Workaround", once I identified my error it worked like a charm!

[@ChristianLonneker]

I have solidWorks 2024 (for makers) with an NVidia RTX 3080Ti and its works, thanks!

[@fork3393]

THANK YOU SO MUCH MAN!!!!! super helpful

[@stephanbuth8195]

Dhanyavaad Sir! Works perfectly with the RTX 3060!

[@alexiben6871]

My guy, you are him. Much thanks.

[@MatthewMattson-lq2hd]

Thank you so much, i just recently upgraded from 2022 to 2024 with a 3050 and i could not figure this out, i tried this and it worked so thank you so much.

[@matthewmccord]

I did not have to do this with SolidWorks 2023, the realview graphics just worked by default with my RTX 4080 Super. But when I upgraded to SolidWorks 2024 on the same computer with the same GPU, realview graphics was gone. This trick worked perfectly to bring it back, thank you so much!

[@BillyKruger-i4r]

Best video. Right first time round. Thanks.

[@slengineeringstudy5015]

Working successfully, l have enabled real view graphics in SolidWorks, my graphic card is NVIDIA GeForce

[@nadeem8111]

I have new issue I can see the realview option but it has no effect on the view it same as before

[@numanistanbullu788]

@@nadeem8111 me too =(

[@G_lions]

Thanks, very welle explained. It worked first time!

[@dointh4198]

My god, it was a pain, but it works! Thank you so much!

[@amirreza7133]

Worked for rtx 4070 solidworks 2024 Thank you very much ❤

[@gerhardspitz9520]

It worked straight away. Thank you very much! Thumbs up!

[@RocketkidDesigns]

This worked 4090 on Solidworks 2024. Thank You!

[@EmmaAxtell-gh2fk]

Thank you!!!! after hours of researching graphics cards this is what did it! Thanks!

[@SuperHddf]

Thank you! Worked for my RTX 2070S with the newest SW version. You have a typo in the video description: "Rename it as Workaround, keep remember capital W you have to use." BUT it needs to be renamed to "Workarounds" with an s at the end. Cheers!

[@EngineeringBpfilters]

now it's works with RTX 4070 Super, excellent!! Thank You 😁

[@erickjaves3439]

I just followed your steps. All good my friend, thank you.

[@amirnasr22]

thanks. worked for gtx 960m

[@ВячеславА-л8в]

Great! Rtx 2080 works! Thank you for tutorial! Good luck!

[@andygrant7710]

THANK YOU Worked first time !!!

[@blaster3729]

it worked thanks dude.

[@jasiumodrzynski861]

works for 3080, thank you!

[@vic_]

It worked!!!!!!!!!!!! thanks very much

[@mikebuenafe5987]

works for me in 1 try! Sw 2023 rtx 3080 ti

[@KhayrulIslamKhalid]

Thanks a lot maan..You deserve more subs

[@David-gn2mh]

Con Solidworks 2024 me funcionó con el valor 31408. Buen vídeo, muchas gracias.

[@miltontorresfilho2568]

Amazing! Thank you!

[@luisadrianlompax]

Thanks a lot it works !!!

[@fachrizalfebriansyah4582]

thank you sir its working🔥

[@НикитаНасыпайко-с3ы]

Bro you are AMAZING

[@qbert4325]

Working perfectly.

[@Frank-mj6qv]

Perfect, thank you very much!😊

[@Mr.JCopeland]

Fantastic, Thank you!

[@cadcaetutorial2039]

Very nice sir

[@danielandresmarin2926]

Thanks a lot! It worked first time

[@slybesker]

Thanks Man, huge help!

[@marcinpaluch4352]

it doesn't work with the card Intel(R) UHD Graphics
is there a way to make it work?

[@Nicole90017]

I have the same issue!

[@DDKolt]

have you tried it in the "other" folder? that worked for me. SolidWorks>Allowlist>G12Shaders>Others | and here you need to make the key and name it with your graphics card

[@cheizaguirre5494]

Mines is an intel UHD graphics card ?

[@jeroen-fionahofland9879]

Great video! Thanks.

[@emanmukherjee9787]

Thanks a lot man,
It works with Nvidia rtx 4050

[@lianghaili5026]

It works well with my RTX4080super card, thanks a lot!

[@PolyProject3D]

SW2024 with Geforce RTX 4070 Works, Thank you!

[@MasHenric]

works in my sw24,
Thank you bro

[@gagestamper2382]

what is the music?

[@chriscastro8237]

Worked for me sworks 2024 student

[@mechmanomi17]

Thanls sir, it worked for me on SW2024

[@RLTx]

Fully works also with 30008 and 30408 (NVidia GForce RTX 4060). but (it's not a problem) the scene reflected is only showed after saving the part and for me, it is different.🙌

[@earielflare2203]

It works, thanks!

[@patelpankajhiralal9547]

I just applied in solidworks 2024 and it's working

[@jg1233e]

Worked perfectly first trial 😎

[@RoboNerds]

Amazing! This Works!

[@NerosInferior]

In addition to adding the workaround key, you must enable "Enhanced graphics performance(requires SolidWorks restart)" and "Hardware accelerated silhouette edge" under the performance tab in the settings and scroll to the bottom.

[@kitewinds663]

These steps was what fixing Realview for me. Thank you!
I had to do this in two steps, with restart of Solidworks in between. First "Enhanced graphics performance" (this was the only one showing then), and after restart I could see the "Hardware accelerated silhouette edge" check-button, activated it, restarted, and it works.

[@kitewinds663]

Using a 3090, Windows 10, Solidworks 2024 SP4.

[@roronisetiawan]

It works!! thx

[@rellik136]

Didnt work with SW pro 2024 and a 4070 Super

[@cadcaetutorial2039]

So weldon sir

[@brandonbeta6572]

Thank you works perfectly

[@HeroZone69]

ThankYou I had AMD Radeon Graphics Card

[@siisayako]

please help. the realview graphics has been enabled but there is no actual render effect on the 3D Model. If I use 31408, the model is grayed out. If I use 30008 or 30408, nothing is happening. My software is solidworks 2024 student edition. graphics card, NVIDIA GeForce GTX 1650 Ti/PCIe/SSE2. thanks for your help.

[@abreuo.gabriel]

I have the same problem. Did you manage to solve it ?

[@abreuo.gabriel]

I tried using 32408 but nothing happened

[@NerosInferior]

I initially had this problem. You must enable "Enhanced graphics performance(requires SolidWorks restart)" as well as "Hardware accelerated silhouette edge" under the performance tab in the settings and scroll to the bottom.

[@abreuo.gabriel]

@@NerosInferior Thanks. It is now active !!

[@abreuo.gabriel]

@@NerosInferior It's not getting active all the time. I activate the option, restart my program and have realview. When you exit again, it comes back deactivated. Do you know how to solve it?

[@yatinshrivastava2060]

For me, I had to create an additional key by my graphics card name in the Nvidia corporation folder as well and the hexadecimal values were 70008 for the NV40 folder and 4000000 for Nvidia corporation folder. commenting in hope to help someone.

[@yatinshrivastava2060]

The above info worked for Solidworks 2019 with Nvidia RTX 4060 graphics card.

[@PavolZajac-cy5xp]

Thank you, it works.

[@vezlevez80]

You're a Boss thanks a lot !!!

[@akib.07theboss14]

my graphics card is mx 450 but allowlist can't be found in registry ... how to solve it?

[@benhoudm]

thank you, Fruitfull video .

[@ryanclingman9053]

I followed the instructions, and the RealView Graphics option is now enabled in the menus, but turning it on or off does not actually change what is displaying. For example, a chrome sphere with RealView Graphics turned on still just looks matte and gray instead of mirroring the environment. Is this because the memory value used was not right for my graphics card?

[@ryanclingman9053]

Found the issue, also needed to add a key under NVIDIA Corporation to get it working

[@nadeem8111]

Please help me I have the same issue with Nvidia card

[@numanistanbullu788]

@@ryanclingman9053 How did you do ?

[@QwertyCanada]

@@ryanclingman9053 You are a saint; had the exact same issue; now it works.

[@abreuo.gabriel]

​@@ryanclingman9053 How did you do ? The RealView are enable but not show me beatiful graphics.

[@soersdam]

Thanks, that worked fine! 👏

[@nikolozkapanadze671]

Thanks, very helpful.

[@xBlackThoughts]

I have SW 2024 and a RTX 2080 and it doesn't work for me. 😞

[@xBlackThoughts]

It STILL doesn't work for me.......btw......in the title is SW 2024 mentioned. But in the Video you're talking about an other Version! You should correct this!!

[@icanbarely]

thanks helped a lot!

[@sherzaminabdurasulov5668]

It worked. thank you

[@ulgok1]

Thanks! it works !

[@jonathanrossel7082]

A lot of thanks Bro...

[@Felenari]

Worked great with amd xtx.

[@jimarez6302]

Excelent!

[@shreyashbara3425]

not working in my 2018 version

[@elliottnova730]

Thank You Man

[@972-u6t]

Thank you so much!

[@AdrienNabot]

thanks you saved me !!

[@AlexandervonProuss]

doesnt work :( its greyed out, and i tried all numbers

[@Константин-ш6ч3ь]

Спасибо. В SolidWorks 2024 тоже помогло.

[@shubhamrajput49]

thanks it worked

[@848_fayis2]

Does it work with rtx 2050

[@joshn.9949]

To AMD Radeon graphics doesn't work. Thanks

[@mrnomore]

only worked 3 times. then it stopped again :(

[@vuongvietthang2258]

Thanks so much I did the same thing . I get ok

[@divyeshdodiya7853]

Done done thank you thank you

[@ameyvikramsudarshan7356]

64 bit d word kyu nahi le sakte

[@frankthetank7817]

Thank you Sir

[@leonardoico9113]

Thanks prabhuji