Hello - my John Deere 329D engaged the parking break suddenly during operation and will not start again. It continuously says “cycle lap bar” any idea how to fix this issue ? Thanks !
Mine is not a John Deere but it does have same duetz connectors …my question is, do these run on straight 12 volts or 12v and then drop voltages to hold typically?
My 329e tracked skid stopped suddenly while pushing dirt but only the left side. I changed the left side wheel speed sensor but still a no go. As that and the right side sensors where throwing codes. Any ideas?
Hi I just got him to my John Deere 329d and it’s telling me my right hand joystick is out of center I just replace this May of last year it’s worked fine ever cents but now it’s back to Tel Aviv my right hand joystick is out of center any ideas or did you make any videos on this I really hate to spend another $1500 thank you for any help
I have a problem, my John Deere 310J. The engine starts normally, the steering wheel is normal, but I can't stop parking.
Check your solenoid
Where did you get those awesome gloves
From the local parts stores, and shop supply stores.
They come in Green as well
Hello - my John Deere 329D engaged the parking break suddenly during operation and will not start again. It continuously says “cycle lap bar” any idea how to fix this issue ? Thanks !
Check the lap bar sensor, and the Wires to it
Mine is not a John Deere but it does have same duetz connectors …my question is, do these run on straight 12 volts or 12v and then drop voltages to hold typically?
Depends on the setup. Usually is just 12 volts
My 329e tracked skid stopped suddenly while pushing dirt but only the left side. I changed the left side wheel speed sensor but still a no go. As that and the right side sensors where throwing codes. Any ideas?
Some of those skid steers were notorious for the drive motors going.
how did it work out mine just did the same thing on the left side 329d right works loader works left side is dead
Hi I just got him to my John Deere 329d and it’s telling me my right hand joystick is out of center I just replace this May of last year it’s worked fine ever cents but now it’s back to Tel Aviv my right hand joystick is out of center any ideas or did you make any videos on this I really hate to spend another $1500 thank you for any help
Hopefully a recalibration will fix that, but it's usually a joystick issue.
There might be a warranty on it?
hello my John Deere has a fault that turns on but does not remove the parke
What does the code say?
Hey. I have a 326D and I'm not having this code, but the wires look good. What next?
What is your code?
My John Deere is doing the same thing but I checked all Thoes wires and they are good. What else can I check?
The solenoid itself, if you can, swap out the solenoid with another to see if that works!
Or if you have an Ohm meter, check for continuity
Hi my john dear machine is engaging gears but not moving...wat could be the problem checked solenoid ok
Tires or tracks?