@@thinksmart7587 it's used single impeller, can you make animation like this www.google.com/search?q=double+suction+impeller&sxsrf=ALeKk00XykP4qnflyxWY1Gwv7qDgUeU67g:1625758033161&source=lnms&tbm=isch&sa=X&ved=2ahUKEwirjbrQ5NPxAhVGbSsKHTXlCP0Q_AUoAXoECAIQAw&biw=1280&bih=577#imgrc=cCvxF40tZNdpxM impeller
@@thinksmart7587 From all the engineering structure book I have read , it all says that dynamic machinery like a centrifugal pump needs at least 3 to 5 times the weight ratio of the group motor pump for the foundation to absorb vibration???
HIU FUNG the pump must then be attached to a concrete slab. I'm not a construction engineer but I know vibrations occur during operation. See this video: th-cam.com/video/_OeSj3aaZVc/w-d-xo.html
@@thinksmart7587Hi!!! I saw the video , but I don't think the concrete in the video is the slab... That's the foundation I was talking about . it goes deep underground , it does not need a slab if the soil is good for the installation . I think... Can someone correct me .
Baraka Minja I think that in your case a vertical pump is recommended... Watch here: th-cam.com/video/L6NHwB8B9xs/w-d-xo.html th-cam.com/video/JRC8fF0KHBI/w-d-xo.html
Thanks for the good information
Very nice 👌👍🥰
may I Request how that single impeller change with double impeller, tks
It’s double because water enters in the rotor on both sides
@@thinksmart7587 it's used single impeller, can you make animation like this www.google.com/search?q=double+suction+impeller&sxsrf=ALeKk00XykP4qnflyxWY1Gwv7qDgUeU67g:1625758033161&source=lnms&tbm=isch&sa=X&ved=2ahUKEwirjbrQ5NPxAhVGbSsKHTXlCP0Q_AUoAXoECAIQAw&biw=1280&bih=577#imgrc=cCvxF40tZNdpxM impeller
so you change thats impeller with it, tks
Really super ,thank you
wow, that's just a great work. it's awesome.
amazing! what is the software used?
Thank you! Solidworks...
very nice animation, Thanks
abdurasheed ummathur thanks! 😊
Pregunto que tipo de bomba tipo tamaño cómo se clasifica esta bomba
Hello friend. Good one where can I find this.
Is it possible to have a 10000kg foundation for this kind of pump? Let say 2 to 1 weight ratio ???is really not enough ?
HIU FUNG you don’t need a foundation like that .
@@thinksmart7587 What kind of foundation do you need ??? Can you explain plz
@@thinksmart7587 From all the engineering structure book I have read , it all says that dynamic machinery like a centrifugal pump needs at least 3 to 5 times the weight ratio of the group motor pump for the foundation to absorb vibration???
HIU FUNG the pump must then be attached to a concrete slab. I'm not a construction engineer but I know vibrations occur during operation. See this video:
th-cam.com/video/_OeSj3aaZVc/w-d-xo.html
@@thinksmart7587Hi!!! I saw the video , but I don't think the concrete in the video is the slab... That's the foundation I was talking about . it goes deep underground , it does not need a slab if the soil is good for the installation . I think... Can someone correct me .
Hello Sir, this impeller is forward curved or it is just for illustration purpose?
Raphael Meireles ahh, i put it wrong :(
Waah Dost. Kya observation tha aapka ???
Can this pump be installed vertically for abstraction from a wet well?
Baraka Minja from what depth do you want to pump the water?
Baraka Minja I think that in your case a vertical pump is recommended...
Watch here:
th-cam.com/video/L6NHwB8B9xs/w-d-xo.html
th-cam.com/video/JRC8fF0KHBI/w-d-xo.html
The impeller is in the wrong direction?
Handel Francisco i know! It was too late to change and made all renders and videos
I see. I do appreciate your hard work on this. Great work!
impeller blades pointing incorrectly
Sergei Paramonov i know! I noticed too late
@@thinksmart7587 It happens when you work a lot. Great graphics! only the video is too long.
Amazing work and simulation, would you share the solidworks files to learn. Thanks
Grosvin Hdz thanks! I don’t work there anymore! I do not have files!
please correcting impeller rotating direction your rotating not correct
Hii 😁
Charlas Nadar hi!
Also something is not right in your design .... The base plate for the pump and motor should be in one piece.
I know very well now! It was my first split case pump! I make this video in haste.
HIU FUNG it is easy to see the mistakes and harder the work of a single man, who is also a beginner in pumps production.
@@thinksmart7587 Oh no sir , you did a good job , I'm impress by your design
@@thinksmart7587 excuse me Why Is this call Double suction Pump? The liquid flows in just one direction from the suction to the discharge
I want pump ,waw