I think everyone are happy with the solution they find. 🤔 But what is the root cause for the message"Windows cannot be installed to the disk...". What is the reason it shows that message. Any help..
@@electroskillschannel471 bro my HDD of 1TB formatted during Windows installation..now i have tried each and every recovery software but all vain...can you please help me how can i recover my data it was very important data.m
I was actually able to boot the USB device, make partitions on the SSD but there wasn’t really any way the SSD couldnt be installed a Windows OS on the Dell Inspiron Mini 1012 I’ve been working on. Thanks anyway!
After typing "create partition primary size" I get the message- Diskpart has encountered an error: the request could not be performed because of an I/O device error. What should I do?
This error implies acces to the device is interrupted so the operation system is unable to read or write to the drive due to a bad connection or an impacted drive latter. Try to change the drive latter. Then open CMD as administrator and type this command to check and repair the drive : chkdsk /f /r X: ==> Replace X with your drive latter
It seems you have a problm in you device, so you can the the disk by: type chkdsk E: /f /r /x (replace E with the drive letter for your device which contains I/O device error).
The disk is a GPT partition so you should convert it to MBR. In the same window command select the disk partion ( diskpart --> list partition --> select disk (your disk) ) and enter : convert mbr I hope that it will work fr u
I have problem I type format fs=NTFS.. error encounter.! I m installing win 8.1 how you get C: prompt ? How it happened bottom notification error ..I was trying to do wipe out hard drive in terminal, live boot Linux. Pl help.
It seems that you are trying to install windows on USB or an external hard drive. The first thing to do is fomat you USb/hard drive with NTFS format. Then download WinToUSB software and use it to boot your USB /external hard drive.
@@electroskillschannel471 means when everything is copied and we restart we should keep pendrive attached.....but after restart should we do anything or just let it start
Yes bro you should press the boot button of your computer (F2, F9, F10,or F12 depending on your computer )to continu booting. In the tutoriel I have just shown how to avoid the disk partition problem by creating new safe partition and copy all the data to it. You can check the booting process in another video in my Channel.
I followed the exact steps i have an nvme m.2 samsung evo970 500gb. My bios is set on legacy mode . My boot usb iso is set on mbr and yet it shows the same msg even after following your guide
@@electroskillschannel471 actually i did . The problem is that when i use legacy mode and mbr format . Sata mode on ahci . Sata controller enabled. The msg during installation says that windows cant boot from this hardware...etc. when i chose gpt mode with uefi and i disable csm. The m.2 nvmi cant be found at all
@@akshayraj4086 unfortunately i had to sell my 500 nvme ssd and buy an 1tb sata ssd with the same price. I found no solution. It has no point having an nvme ssd but not boot from it.
www.lapcare.com/download/ I found this official link of Lapcare. scroll down and choose : LAPCARE MOTHERBOARD G41 DRIVERS and download the drivers pack. Then, easily you can make the installation as any other software. The computer will restart to make the update. ⚠️ Don't power off your computer. I hope this solution work for you. Thanks for your trust
#farsanel It's just locked bro. You can unlock the it easily. just search on how to unlock or enable bios advenced setting according to you laptop model, and it will appear again in your bios setting.
Use this method may it work for you : -Pressing "A" key while entering BIOS setting after pressing your key to enter the BIOS setting (usually F1,F2,F10,F10, echap or DELETE) immediately press A one. And look around your manus and see if something is unlocked.
@@electroskillschannel471 i havent tried installing the OS in my laptop hdd to a different pc tho. should I try it or send it the professionals for 2/3rd opinion cuz I gave up. I've met many problems yet its one is persistent
Try this process : 1- open CMD command as administrator and enter this command chdsk /r d: Change the letter d with the letter of the drive path letter that is facing the problem. And CMD window 2- re- open CMD command prompt again as administrator. Enter this command : sfc /scannow It will take some time. If finished close the command window 3- go to device manger and select disk drivers and clique to update. Choose "brows ly computer for driver software" --> chose "let me pick from a list ..." --> and select disk driver and clique next. 4-Restart your computer.
"E" specifies the destination drive, in our case it's the E drive. "/h" to copy hidden and system files "/e" used to copy empty directories "/k" to keep read-only attribute "/c" used to continue copying, even if an error is encountered. That's all bro.
It didn't help me. Your last command of (xcopy C: E: .... Didn't work for me) it is saying " the system cannot find the file specified" and volume E didn't generate as well. I followed it as it is.
When you activate the partition, the next step is to assign a letter. In the video i just let system do it. But if you want specify a specific letter you can simply enter this command : assign letter = name P.S : replace name by the letter you want
Thanks very much bro. Too good you are. Much love from PNG. Kimbe stret✌️
Happy to help bro
I have tried so many options and non didn't work. I am so grateful for this help 🤩
Happy to hear that 💪 thanks for your support bro
I think everyone are happy with the solution they find. 🤔
But what is the root cause for the message"Windows cannot be installed to the disk...". What is the reason it shows that message.
Any help..
U got a sub and It workd
thank u cuz noone else had a good tutorial. U disurv 500000000000000000000009000000000000000000000000 subs
😍 thaaanks brooo 💪💪
Bro it says the system cannot find the drive specified i hope you reply fast
amazingg thanks Man you save me, after following your tutorial and finallyyyy did work welll greating from Indonesia👍😎😎
Happy to help bro 💪
Thanks for taking the time to do this as it worked for me 🙂I was on the brink of throwing desktop away.
Happy to help brother 💪
wooooooooooooooow bro ur the best i dont know how to thank u i wish u the best in ur life bro😢😢😢😢❤❤❤❤❤❤❤
Thaaanks so much Bro for ur support 💪💪❤️
Works perfectly. September 2022. Thanks very much. Perfect! ⭐️⭐️⭐️⭐️⭐️
Happy to help broo
I have never commented on a TH-cam video.... You are the best... I wan to buy you a coffee ☕
@Collins Smith thanks so much for your support 💪.
it's my pleasure 💙, this is my Paypal : paypal.me/ElectroSkills
Thanks for sharing your knowledge! It finally works!
Happy to help 💪
Thanks man you have earned yourself a subscriber...
Thanks bro for your support 💪
@@electroskillschannel471 bro my HDD of 1TB formatted during Windows installation..now i have tried each and every recovery software but all vain...can you please help me how can i recover my data it was very important data.m
There is good software, but they are licenced bro
Thank you so so much for this video! I wacth always your video
Thank you so much 💪.
I really appreciate your support 💙
amazing, it works..saved me a lot of time, thank you so much!
Happy to help 💪
ILY BRO YOU'RE THE BEST FINALLY THANKSSSSS
At the part I create partition, it says the request could not be performed because of an I/O device error
THANK YOU SO MUCH BRO! YOU ARE A LIFE SAVER
Happy to help you bro 💪
Im trying to create the partition but its showing me data error (cyclic redundance check) PLEASE HELPP
I have the same error. Did you find the solution?
Thanks man, its works , you're the best
💙
Thanks 💪
Subscribed 💕 Keep It Up 💕
Thanks 💪❤️
You Deserve more likes 👍👍👍👍👍👍👍👍👍👍
Thanks for your support 💙👍💪
Thank you so much.. you've saved my pc life, i almost throw it out 😆
Thanks bro yes it works thank You so much
You are so welcome bro 💪
It works for me
Thanks bro 👊
Happy to help you bro 💪
It worked. I'm grateful.
You just got a new subscriber 🤗
Thanks bro 💪
Best tutorial huhu you save me!!!!!!!!!!
Happy to hear that bro 💪
Thank you so much it works
Hi bro, I did all this but was not successful in installing the Windows SSD, HP 6570b
sem problem Sir
Ty for your tutorial 🙏
I tried this procedure correctly and ejected my USB bootable device (Windows 10 installer) and restarted but it says "Operating System not Found"
The problem is on the USB bootable device because the system didn't find any OS in ur USB device .
You can boot the USB again and retry.
I was actually able to boot the USB device, make partitions on the SSD but there wasn’t really any way the SSD couldnt be installed a Windows OS on the Dell Inspiron Mini 1012 I’ve been working on. Thanks anyway!
@@RobinRoyceYap Same issue with my Dell Inspiron Mini 1012. Same results. Alas
big thanks man it works
After typing "create partition primary size" I get the message- Diskpart has encountered an error: the request could not be performed because of an I/O device error. What should I do?
This error implies acces to the device is interrupted so the operation system is unable to read or write to the drive due to a bad connection or an impacted drive latter.
Try to change the drive latter. Then open CMD as administrator and type this command to check and repair the drive : chkdsk /f /r X:
==> Replace X with your drive latter
I can't able to create partition primary size=204800, it shows : the request could not be performed because of I/O device error, please help me
It seems you have a problm in you device, so you can the the disk by: type chkdsk E: /f /r /x (replace E with the drive letter for your device which contains I/O device error).
Didn’t work for me did all this and got stuck with “this partitions is of GFB style” won’t let me format either.
The disk is a GPT partition so you should convert it to MBR.
In the same window command select the disk partion ( diskpart --> list partition --> select disk (your disk) ) and enter : convert mbr
I hope that it will work fr u
very helpful video thanks much
Thanks for watching bro. Please subscribe for more helpful videos.
I have problem I type format fs=NTFS.. error encounter.! I m installing win 8.1 how you get C: prompt ? How it happened bottom notification error ..I was trying to do wipe out hard drive in terminal, live boot Linux. Pl help.
At the language selection stage, press shift+F10 in order to display the window command as administrator
Yo bro you saved my litel cousins pc bro
got access denied error while copying files
PLEASE HELP
I think the probelem is due to the administrator privileges
Bro please tell me whether it will erase my data or not?
Thanks
Works perfectly. jun 2024 im from indonesia
You saved me bro 😎
Happy to help 💪💙
windows cannot be installed to this disk. setup does not support configuration usb or ieee 1394 port.. i am getting this error message.. pls. help
It seems that you are trying to install windows on USB or an external hard drive.
The first thing to do is fomat you USb/hard drive with NTFS format. Then download WinToUSB software and use it to boot your USB /external hard drive.
Hey there when entered the “copy C: E:/e/h/k” it says the system cannot find the disk specified. A little help?
Hey bro,
You should change the letter E with letter assigned for the new partition that you have just created.
@@electroskillschannel471 thanks for the reply! But unfortunately it is still saying the same thing. Do I need to change the “h” or the “k”?
Bro, The command is " xcopy C: E:/ e/h/k"
And not "copy C: E:/e/h/k "
@@electroskillschannel471 oops didn’t notice, but now I have an Invalid drive specification. Sorry if I’m asking for too much
No prblm bro we are here to help you.
Try now to add "/c" ,like that :
xcpoy C: E: /e /h /k /c
the best!!!!
Thanks alot man
Bro what we write in command
thanks
You're the best❤️😇.. I was worried after seeing that error but thanks to you for your video 🙏🌹
Thanks bro
Happy to help bro
Thanks man, its works 😎
I followed all your procedures but sad to say it doesn't work on my laptop, the problem is still exist
Sad to know that bro, I hope you fix it later.
Maybe the problem cames from your hard drive.
After Diskpart command it shows nothing
Did it give you an error ?
The system cannot find the drive specified 😢
Bruh u saves my life
Please help l want to create a partition primary but it say diskpart has encountered en error.... What should l do please ?
Did you have the message "access denied " or "I/O device error" ?
If you have access denied, it means that ur hard drive is considered unauthorized or blocked. So I suggest to run the CMD as administrator
it works! I can finally go to sleep! Thanks!
U are so welcome bro 🌹
Tanks working
Does it support windows ,8.1?
Hii bro, sorry for my late reply.
I test it with windows 10, so it should work also with windows 8 or 8.1
It says invalid drive specification 0 File(s) copied how do I fix it
Did you specify the right path ? Because you have just a problm in the path you already specified.
Example ::
cd C:
xcopy C: E:/e/h/k
After assigning it is not showing c it shows e
Ye E is the new partition created where all the C files will copied
thanks man
merci beaucoup tu es le meilleur 👊🏼
Thanks bro
Happy to help 💪
you got 1 more like and subs bro KUTGW
Thanks bro and welcome to electroskills Channel family 💪
No partition appears excited c partition, pls i can't fix it.
Did you have just one partition in your hard drive ?
Really big thanks . You saved my day
Welcome bro 💪
bro after copying successfully and restart should we remove bootable pendrive or keep it ????
Yes bro you should keep it if you want to boot your computer after restarting.
If not, you can remove it.
@@electroskillschannel471 means when everything is copied and we restart we should keep pendrive attached.....but after restart should we do anything or just let it start
Yes bro you should press the boot button of your computer (F2, F9, F10,or F12 depending on your computer )to continu booting.
In the tutoriel I have just shown how to avoid the disk partition problem by creating new safe partition and copy all the data to it. You can check the booting process in another video in my Channel.
I followed the exact steps i have an nvme m.2 samsung evo970 500gb. My bios is set on legacy mode . My boot usb iso is set on mbr and yet it shows the same msg even after following your guide
Did you try yo use GPT partition !
@@electroskillschannel471 actually i did . The problem is that when i use legacy mode and mbr format . Sata mode on ahci . Sata controller enabled. The msg during installation says that windows cant boot from this hardware...etc. when i chose gpt mode with uefi and i disable csm. The m.2 nvmi cant be found at all
@@aminehadjela I have same problem. Did you fix it?
@@akshayraj4086 unfortunately i had to sell my 500 nvme ssd and buy an 1tb sata ssd with the same price. I found no solution. It has no point having an nvme ssd but not boot from it.
@@akshayraj4086 Hii, I have the same problem, did you fix it??
Thank you, you beautiful beautiful person.
I'm to happy to help ❤️
Im stuck at this D:sources\installed.esd
After xcopy
it dose not work please help me
Bro I don't have AHCI mode in bios there is only ide what I do plz help
Hello bro
This problm can be sometimes be fixed by updating the BIOS
@@electroskillschannel471 but I don't know how to update BIOS and where to download bios file (my motherboard is lapcare LMB G41)
www.lapcare.com/download/
I found this official link of Lapcare. scroll down and choose : LAPCARE MOTHERBOARD G41 DRIVERS and download the drivers pack.
Then, easily you can make the installation as any other software. The computer will restart to make the update.
⚠️ Don't power off your computer.
I hope this solution work for you. Thanks for your trust
create partition primary size=204800
error show korce.
Try to change the volume of the partition. Less than 204800 Mbytes
by this method, the whole partition will be formate. is there any other option by securing data in other partitions like disk D and E?
Check if you have SATA CONFIGURATION in your ADVANCED BIOS OPTION !
if yes we will jump to the next step
@@electroskillschannel471 how can I do this if my laptop doesn't accept advanced options in bios?
#farsanel
It's just locked bro.
You can unlock the it easily. just search on how to unlock or enable bios advenced setting according to you laptop model, and it will appear again in your bios setting.
Use this method may it work for you :
-Pressing "A" key while entering BIOS setting
after pressing your key to enter the BIOS setting (usually F1,F2,F10,F10, echap or DELETE) immediately press A one.
And look around your manus and see if something is unlocked.
@@electroskillschannel471 i tried that too but it doesn't work
Merci, je reussi ici.
i followed every step yet the problem is still there why?
It shows you the same prblm or a problm in disk partition (GPT or MBR)?
@@electroskillschannel471 it shows me the same problem. i tried converting it to GPT yet still it shows the same problem
it's weird bro 🤔.it seems that there is a prblm in the hard disk
@@electroskillschannel471 i havent tried installing the OS in my laptop hdd to a different pc tho. should I try it or send it the professionals for 2/3rd opinion cuz I gave up. I've met many problems yet its one is persistent
Yes bro , may be you should send it to a professional repairer
Will it wipe my data?
No bro, all of your data will be preserved
It doesn't work
The problm is still persistent ?
Can you specify the error message
Not sopport
It says it encountered an error: the request could not be performed because of an I/O device error.how to solve
This problem is due to a connection error between your PC and your Hard drive, USB ...
Try this process :
1- open CMD command as administrator and enter this command
chdsk /r d:
Change the letter d with the letter of the drive path letter that is facing the problem. And CMD window
2- re- open CMD command prompt again as administrator. Enter this command :
sfc /scannow
It will take some time. If finished close the command window
3- go to device manger and select disk drivers and clique to update. Choose "brows ly computer for driver software" --> chose "let me pick from a list ..." --> and select disk driver and clique next.
4-Restart your computer.
What is meaning of e/h/k
"E" specifies the destination drive, in our case it's the E drive.
"/h" to copy hidden and system files
"/e" used to copy empty directories
"/k" to keep read-only attribute
"/c" used to continue copying, even if an error is encountered.
That's all bro.
It didn't help me.
Your last command of (xcopy C: E: .... Didn't work for me) it is saying " the system cannot find the file specified" and volume E didn't generate as well. I followed it as it is.
E is the disk part you just create in the previous command
How to create drive letter
When you activate the partition, the next step is to assign a letter. In the video i just let system do it.
But if you want specify a specific letter you can simply enter this command :
assign letter = name
P.S : replace name by the letter you want
Thank you so much bro🥹