How to Change Headlight Bulbs on 2011-2013 Kia Optima- QUICK N EASY!!!
ฝัง
- เผยแพร่เมื่อ 6 ก.ย. 2024
- Quick and easy how to video on how to Change Headlight Bulbs on 2011-2013 Kia Optima. The video and this method can be used on other KIA’s as well as be applied to later models that range from the 2011 - 2013. I am using the H11B low bean head light bulb to replace the headlight bulb on this 2013 kia optima.
A friend of mine did not want to goto the dealer and she knows I am very handy so I helped her out. Allot of friends with many different types of cars comes to me for help so I decided to record the experiences and post them here on youtube for you guys so you don't have to spend big bucks at the dealer just to change a headlight.
Best of luck!
QUICK LINK TO BUY THE BULBS FROM AMAZON WITH QUICK SHIPPING: amzn.to/3kBCwQh
***********
FOLLOW US ON INSTAGRAM! - / thejabbour
**********
This video is accurate and in most circumstances the bulb change should be as easy as he showed it to be... however, if you had the same luck I had--and from some of these comments I can see I certainly wasn't the only one who could NOT seem to get the bulb to unscrew no matter what I did. I was changing out the driver side low beam. I got the access cylinder lid off no problem in my case, but try as I might I could not get the bulb to turn to the left and come out--or budge at all for that matter. I tried leather gloves, heavy work gloves, and even steel mesh gloves, but despite giving it all my might, it would not give. I went through this for 2 evenings to no avail, only to end up with sore fingers. I tried using a pair of pliers but of course you're very limited as to what you can stick in there because of the angle it is, and the fact the that fuse box is in the way. All the pliers did though at first was break off the middle part of the plastic handle from the bulb so I knew I needed to not try that anymore or there wouldn't be anything left to grab a hold of. Finally I decided to fashion a crude homemade contraption of a tool by taping (one-time use) horizontally to my plier blades, 2 one inch pieces of steel from a cut carpentry nail. I taped both pieces of nail to my straight plier blades (t-shaped nail on plier blade) to where when I inserted the pliers and grabbed onto the plastic light bulb end, the force would be distributed equally by the steel pieces when trying to turn the bulb to the left with the pliers. Hard to explain, really, but with some effort the darn thing FINALLY gave and came right out. There were no screws holding it in which I was growing suspicious of, it was just tight! The new bulb went right in with no problem and I jumped for joy in the driveway for 10 mins afterwards celebrating lol. Well maybe not 10 minutes but I was elated as I was about the the point of figuring the only alternative was taking the whole light assembly out from the front which I was sure dreading. So just wanted to pass this along in case it might help someone else in the future. This was for my daughters car and you know as a dad I HAD to figure out a way!!
Had the same issue, got a flathead and lightly tapped it with a hammer, popped right out.
The damn plastic part broke before I could get it to come out… I guess I gotta take it to the dealership
@@johnyoung7523 Ugh. Stupidest design ever! That car ended up getting totaled shortly thereafter so I never had to worry about that again! 🤷🏻♂️😬
@@joshaneinthanks, I hope I can get mine out using this idea. I told my boyfriend he didn’t need to take his car to a dealership to get a headlight fixed and that I could do it and, of course, it’s not as easy as I hoped, lol. My bulb is very stuck but I’m gonna try using a flathead and hammer later 🙏🏼
@@johnyoung7523same here smh
Just wanted to drop this comment just in case it can help someone else out. I have a 2013 Kia Optima SXL turbo & there's two big differences in this video than the experience I had. First, the bulbs that were replaced previously in my vehicle, had to have likely been done by a dealership. I say this because there's a small Philips screw underneath the low beam headlight housing, that screws into the twist off cover. If you don't not take this out, the cover WILL NOT twist off. I found this out after doing some research on why the cover wasn't coming off. I'm sure no one who does work on their own car, would put this back on. It's way too much of a hassle and not needed.
Secondly, the SXL Turbo model doesn't use H11b bulbs for the low beam lights. It uses a more expensive D1S HID bulb. The installation of that bulb is way trickier than this type bulb.
Just a heads up for SXL Turbo model owners.
Thanks because I’m having that problem as we speak
This video just helped me replace my driver side low beam and save me about 80$ in labor. Bless you.
Whoever was gonna charge you $80 dollar is an asshxole lol
Simple and helpful. Thanks dude. This video prevented me turning it the wrong direction and snapping the connections with my above average strength.
Thank you Ryan, after four years, this video is still useful.
I just changed my bulb in the Walmart parking lot literally 5 minutes- thank you so much!!!! Very simple indeed
So helpful, thank you very much! I just want to point out that there are three little indentions on the base of the bulb (1 is larger than the other 2), make sure they are lined up when you insert the new bulb, then when you twist it to the right those prongs on side of the bulb automatically slip into the rubber plug mechanism. It can only go in one way. Thank you for the awesome video!
I know this video is a few years old, but it is PERFECT timing for me! Thank you so very much.
It was so easy for you to do, I'm gonna give it a try tomorrow morning, I bought the bulbs but two separate guys at two different Autozone's couldn't get it in there 🤷🏻♀️.
Was you able to get it in I’m gonna try to do my 2015 Kia Optima
Did it work
Thanks! My driver bulb just went out. I only brought the one replacement, but I'm going to go buy another one to replace the passenger side as you suggested.
Very good straight forward video. The only thing I will say is certain models like mine (2013 SX Turbo), has factory installed D1S HID bulbs not H11B for low beam.
Will the h11b fit on it still or na
@@chrisstrohman4131, no it doesn't. I learned that after I bought the darn H11B bulbs and opened the package.
This was very helpful. I was able to do it myself. Thanks for sharing.
You’re welcome!
Excellent video... I really like the tip on how to install the bulb and showing it from the out side before doing it in the chamber.
This is my experience as of today, February 26, 2024. I have a 2012 Optima SX-Turbo.
It is NOT a piece of cake, as described here. It requires a Sylvania D1S, same as in most BMW's. It's $220/pr. The cover that seals the bulb in, is not just a screw in or ¼ turn. It is held in by a very small Phillips screw at the bottom. PITA just to rotate this screw. In addition, you MUST remove the coolant reservoir just to manipulate said screw on the passenger side. Same on the driver's side, EXCEPT that you must remove the battery to get the previously described.
Thank you! Simple and straight to the point!
One side was easy, other side, very tight. First, I used a needle nose plier... bad choice. Broke off a piece of plastic. Then I used a small adjustable wrench... Bingo!
Ty for the video.
Awesome glad it helped!
Thank you very much for sharing your knowledge with the rest of us. May you be blessed.
Its quick and easy if your hands are the size of a 3 year old. My hands can't even fit a quarter of the way in there.
Wow this was the MOST straight forward video I’ve even seen ... wish you would’ve posted this earlier, paid a $111 traffic ticket.. because I didn’t know how to change my headlight LMAO 😂
Omg thank you sooo much 💕
Thanks Lisa! Happy it helped!
Lol next time go to an auto parts store preferably Oreilly and ask them to change it for ya, most of the time they will do it if it's not too hard or time consuming
“This is quick, this is easy, this is simple” my ass!! my bulb is lodged in there deeper than the Mariana Trench
Same with mine!! Did you ever end up getting it?
@@witherxsoul2462 nope. I had to take it into the dealership, they couldn’t get it out either and had to take the bumper off to replace it. Best $110 I ever spent cuz I woulda lost my shit trying to do it myself
5 years ago i didn’t have a car. Got my first car a 2012 kia Optima in 2021. Was always waiting for the day I will have to change a light bulb.
Well today is that day.
Although I think I messed up a bit here.
I was quick on buying the bulbs but turns out I got the Halogen H11s, watched the video then, I got out the bulbs.😅. Turns out they are H11B.
I’m trying to figure out if the H11s go in. Or if I have to go get the H11B.
Anyways I wanted to say thank you. So much for the video.😃
unbelievably helpful. thank you
Awesome! You’re welcome.
My car light went out 😭 I hope I can successfully do this. Wish me luck.. .
How did you do? Success?
Lol
Did it work?
Of course it's "easy". They make everything look easy on TH-cam 😂😂😂
actually was easy ash
I love this video straight forward. I’m just having a hard time taking apart the weather cover thingy. It’s really on there good.
Thank you I appreciate that! You just really have to turn it with some force, it will pop off!
I have a 2015 and I bought the h11b just like it was meantion on their computer. I was completely wrong, H7 was the go to.
Thanks for the input :)
@@rosesuperior I just bought 2 bulbs for my 2015
Simple process thats simply done simply.
noting even close to mine.. mine on my 2013 Kia Optima is a box I have to remove. The light buld does not look like a H1 or an H11. Wish it did.
Dude thank you so much 👌👌💯💯I appreciate it God bless you
Thank you. Very helpful. It was very hard to twist but I managed. I would recommend that if it's very tough to apply some WD40. Take out the battery for extra room. Use a small flathead and hammer and hitting the small ridged counter clockwise to loosen.
Thanks for this comment. I had thought of this but was hesitant due to potentially breaking the bulb, but it worked like a charm. After putting on the WD40, put a flat head screwdriver at close to horizontal as could get it, and did a few quick taps with hammer so as to not break the bulb, and it moved. Then came out super easy like the video. New one went in just as easy with no damage caused from the weird removal.
Thank you for the tip about WD-40. After trying by hand for an hour, gave up and tried again with a bunch of tools that couldn't fit in the tiny space, finally tried with WD-40 and it turned so easily. THANK YOU!
In advance, Thank you for your video, but I cannot remove the bulbs.
Mine has screws in it and my fingers are literally cut and bleeding because I couldn't get the bulb out. How do I remove the screws? Is there a tool or a video showing how to remove them?
Yup, I’m in the same boat. Any fix???
I know this won't get a reply but I have kia optima 2012 and the low beam won't twist out on passenger side
I always have trouble changing that bulb due to it being so close to the coolant. I unscrewed some of the attachments for the coolant to move it that way I could access the bulb area better. Hope you figured it out, if not maybe give that a try!
"Turn the cover to the right."
Does the top go to the right (counterclockwise) or the bottom (clockwise)?
Those are crazy expensive. Had to replace two in one year. I havr to use the HID special for my Kia Optima SX .. they are $100
Some models have a screw at the 6 o'clock position. This is what I came upon when I tried to change my friends for her. What a pain in the ass cause you can't see it without researching dust covers.
Great input and thanks for adding!
THANK YOU!!! My fingers are literally cut and bleeding because I couldn't get the bulb out. I looked at it with my camera phone and noticed the screws. How do I remove the screws?
Mine was far from routine or anything like I've changed before and the bulb was over 100$ for 1 bulb.mine had a screw before u can unscrew cap and a clip over top the bulb itself that I can't figure out how to remove. Rediciculous
I can't fit my hands in the bulb slot. I can get one finger on the damn thing but I cannot twist it. I don't understand how you got a grip on that bulb.
The bulb actually twists to the right in order to remove, not the left.
Thanks. Loosening battery helped.
This was really helpful. Thanks
You’re welcome!
My headlight bulb seems to have screws, any ideas?
Theres 2 screws at the top of headlight assembly that lets you just remove the entire light 99× easier
Yes, he seems to have missed that major part. Much easier to get to the bulbs
Oops, i accidentally dropped the bulb inside the light bulb well. Any idea how to fish it out 😢
Does anybody know what's the orange light calls? The one on the right side
exactly what i needed, thanks!
I had a question my 2015 optima passenger side is an h11 h 7 on driver side and won’t come out
Very helpful except I can't turn the old lamp to get it out. Either I am not strong enough or it's stuck🥺
I hope you added LED white bulbs after 2 yrs you did this video, those yellow light are horrible looking and dangerous to drive at night. I got a 2013 Kia Optima that I bought brand new and I have LED’S super nice and bright white color.
Thanks for this!
You’re very welcome! Glad it helped!
This is actually very hopefully omg thank you
Change the right side because it is alot harder to get in too on 2012
You just saved me! Thanks!
Thanks bro. Very helpful
Will this work with 2014?
Hey man! My Kia Optima 2015 drivers side headlight is out. High beams both work and I’m getting no power to that headlight for some reason. Changed the bulb and still no power or light. What do you think I should do?
2012 Nissan versa
Would a 2015 Kia Optima headlight fit a 2012 Kia Optima
The Auto Makers do this on purpose... It should be easily accessible....It's a FRICKEN bulb change.
It wasn't that bad.
Be thankful its not like the 2008-2012 malibu the entire front bumper cover has to come off!!!
May have forgot to mention - DO NOT TOUCH BULB GLASS - else hand oils it might burn bulb out sooner.
Good vid. By the way, I just saw that my 'amber' light by the headlight (upper side of the headlight) went out Any vids on changing the bilb on that?
Hello... I have the same amber lite out also. Any ideas yet how to change this bulb? Some say the bumper has to be removed. I hope not.
Tips on gettinfg to the other side?
I just paid almost $160 for a bulb and had to take it to a shop to put it in. They ordered a different color Than the bulb it was🤦♀️ I had the bright LED bulbs & this one is a lot dimmer & more yellow. Ugh
Do you have any experience with the H11B LED bulbs? I have an '11 Kia Optima and am TRYING to overcome the stupid (defective) projector lights in a friend's car. She does not have the $$ to replace the headlight housings. I have ordered 3 different sets OF LED H11Bs and while they look right the LEDs are larger in diameter at the base where they go into the housings. The LEDs will NOT go in. Any thoughts?
Helps a lot! Just not if you got big hands. Lol
The weather cap is seized in place and the finger grip tabs broke off. I have tiny girly hands and I still can’t get my hand around it in there. I bet the engineer that designed this headlight assembly rides a bike to work.
Thank you!!!!
Ours is on passenger side and I can’t get to it because of Coolant container.. any tips please?
Hi Jennifer, yes I believe you just need to remove the one screw on the side of the coolant reservoir and move it to the side! Hope it helps let me know!
Remove the two screws holding the reservoir in place.
Thank Jim Hardin for the input
'12' means 'fog'
Thanks for the vid
Mine doesn't have Hb11 mine is a 2013 and has H1U headlights
did you get it fixeD?
Thanks bruh ! 😉🤝
Left facing the car?
Did you have a screw in the dust cover?
Do they make LEDs for this
Why does the auto shop say the whole bumper needs to be removed for a headlight and it will be $215
Because the space is so small in there. I notice this video doesn’t show him replacing the bulb. It is not simple, easy or quick. The connector for the bulb is fixed. You need really small hands to replace without breaking the bulb. I will try again tomorrow. Smh
Thanks bro
Yeah well mine is not so easy to turn and take out. Did you loosen the bulb before making the video?
You should be able to twist it off with a little force. Depending on the condition of your vehicle it might be harder to take off.
Omar must be drunk
hahahaha
Mine has like a metal bar blocking it and doesn't look like that at all
Same here..... Going to try with some pliers.
Thank you 🙏
Mine is out on the other side and it's impossible for me to get enough leverage to turn the bulb and get it out 😂 had to take the whole headlight off.
How about the passenger side
Is 2015 Optima the same?
Clockwise and counterclockwise. Not left and right
Seems simple enough, until you discover that the outer cover that seals the light bulb from moisture is all but WELDED on. 😐
Please help!!!
Bleh mine was not the H11B...Mine is a smaller bulb
which way is left bruh cmon clockwise or wat
Yo I hate how this bulb has the plugs like that. It's so annoying
Easier said than done 😣
Where are you having the issue?
@@ryan9701 its legit impossible to reach the back part of the light . The car has that bar in place that makes it difficult. I'm a savvy female but this is tricky.. and it doesn't turn as easily. I don't wanna spend $205 lol.
It will turn just use some force. You have to use your fingers or you can even use a bar or flat head screw driver and put it in one of the grooves in the cover and knock it loose
@@ryan9701 my car doesn't even have all that space you have in your hood and my hands are much smaller than a man's. Mines has a electric and gas engine, it's a very tight reach on the driver side, which is the light thats out on mines. But I'll try with a tool and see if that works for me. Thanks guys.
BULLSHIT how do u detach lightbulb from socket
SOLAR just turn it, takes a little force... I know you can do it lol
Man I take my shit off and it don’t even look like that for me
today i went to kia my low beam bulb went out i look online i will i have learn my lesson into buying anything from the dealer since i cant return in back . Anyways here you go low beam bulb 277.00 plus tax 302.05 online amazon less then $50 bucks . i will add something more radiator dodge charger 1000 at the dear 500 eles where . the dealer ships just as 1 movie i saw they just f@#$ you in the drive thru . i will add 2015 replace the light is tuff to get off lucky i have good friend do all the work witch took hr ...... Im JUST SO PISS iVE GOT JACK ASS PRINT ON ME.
This freaking bulb is not trying to come out!! 😡.
How the fuck does any human person fit their hand in this spot? I'm standing in a parking lot about to have a fucking conniption because I can't get enough of my hand in there to twist this stupid fucking thing.
😂😂😂
THIS IS NOT FOR A 2012.
Quit saying it's easy. It's not, because of the stuff obstructiing the access
Thanks. Loosening battery helped.
Thank you 🙏 ❤