I had the same problem and I just stored the phone 1 knight in the freezer. took it out, cleaned the phone and put it on the loader. the phone started with a loading battery (0%power) and after 5 minutes I could start the phone.
If someone has skills, all you need to do is desolder the small PM IC on the left side, this little plate and that's it, the phone comes alive like a newborn, as you can say it can also be done, but that doesn't solve the problem and the phone will freeze. If you do as I wrote, you can turn it on and off whenever you want.
The deadboot issue is still happening at this time 😢, If you ever opened your phone (POCOM3) , do not shut it down by holding the power key or update or even make it to 10%. This will make your POCOM3 dead. When a deadboot happens to your POCOM3 i recommend you to force reboot(Holding the power key to 8 secs). Do it 4 times a day, it will just miraculously open. If you force reboot and it vibrates, it means your battery is drain(0%). if this happens charge it, never unplug it in this process. Do the fast boot by pressing the power key and volume button down by 8 secs. This will show a fastboot logo. Just hold the volume down and power key until it reboots. If this works do not power off your POCOM3 ever again. If not just unplug it and give it to a technician.
If someone has the skills, he only needs to desolder the small PM IC on the left side and that's it, the phone comes alive like a newborn, as you say it can also be done, but that does not solve the problem.
@@arturnn3754 i know, but not every people know how to open this phone. I just recommended the most desperate way to solve it without using any tools😢. Since people keep searching some ways to solve this issue.
I.had a problem with Poco m3 Phone. Accidently I reboot the phone after that phone did not turn on again I gave to repair shop they told me that they cant repair there is any solution for turn on please. Do u have any repair shop please tell me
Sir Yung Poco m3 ko namn renestart ko lang tapos Hindi na nag open tapos pinakita ko sa technician Pina initan lang ayaw parin mag open at mag charge trinay niya na eh charge kung makikita b na mag chacharge ayaw talaga mag charge boss...Sabi Niya baka board na daw Ang nasira boss...Tama kaya xia boss..Sana matulungan niyo Ako..salamat boss
I have a solution I hope you can solve the problem because I am the one who accidentally rebooted the phone and it won't turn on I did all the ways I was desperate for a week sent to the repair shop the phone technician said it can't be fixed I'm very sorry and so I leave my phone for 1 week, don't charge the battery. I repeat, don't leave it for 1 week. After 1 week, if you are sure that your phone battery is absolutely dead, try plugging in the charger. If the battery percentage goes up, your device is back to normal, good luck. Don't despair, believe me because I'm more desperate than you and more desperate than many people, but I was able to get through it.
If someone has skills, all you need to do is desolder the small PM IC on the left side, this little plate and that's it, the phone comes alive like a newborn, as you can say it can also be done, but that doesn't solve the problem and the phone will freeze. If you do as I wrote, you can turn it on and off whenever you want
same problem and when i pluge in my charger my battery percentage goes up ana i press to my power key to switch on but unable to switch on and battery pc also not showing again
I can't turn on my Poco M3. After fully discharging and connecting the charger, it starts to charge and takes about 2A. After charging to 10%, for example, when I try to turn it on and press the switch, the current drops to about 0.100A and it does not turn on. A black screen remains, I do not show anything, not even the state of charge battery, but uses about 0.100A all the time. I disconnect the power and when it is completely discharged, I connect the charger and it charges 2A again, after pressing the switch it drops to about 0.100A again, and so on and on, which may be the reason.
The battery is good, I measured with a multimeter. When fully discharged it is charged to 100%. But the phone cannot be turned on. One time it fired for me, it worked until my daughter discharged it completely. After discharging it, I can not start it again and the symptoms are as I wrote.
![[FINALE] 💸ที่แท้พ่อเป็นผู้ถือหุ้นบริษัทพันล้าน เขากลับใจตอนนี้ก็สายไปแล้ว🙇🏻♂️#ละครคุณธรรม #short](http://i.ytimg.com/vi/yFwgjTFISUI/mqdefault.jpg)
This is not just the repair, this is work of art. Great job, you put so much effort.
what device you used for battery testing?
I had the same problem and I just stored the phone 1 knight in the freezer. took it out, cleaned the phone and put it on the loader. the phone started with a loading battery (0%power) and after 5 minutes I could start the phone.
its truth ?
If someone has skills, all you need to do is desolder the small PM IC on the left side, this little plate and that's it, the phone comes alive like a newborn, as you can say it can also be done, but that doesn't solve the problem and the phone will freeze. If you do as I wrote, you can turn it on and off whenever you want.
It worked for me. Thank you!
Very powerful 👍 work 💪 brother
أشكرك
Great job sir 👌👌
Always new problem solve
Sir anung tawag sa tinap mo dun sa battery outlet
boss wat use mo stencil plate
The deadboot issue is still happening at this time 😢, If you ever opened your phone (POCOM3) , do not shut it down by holding the power key or update or even make it to 10%. This will make your POCOM3 dead. When a deadboot happens to your POCOM3 i recommend you to force reboot(Holding the power key to 8 secs). Do it 4 times a day, it will just miraculously open. If you force reboot and it vibrates, it means your battery is drain(0%). if this happens charge it, never unplug it in this process. Do the fast boot by pressing the power key and volume button down by 8 secs. This will show a fastboot logo. Just hold the volume down and power key until it reboots. If this works do not power off your POCOM3 ever again. If not just unplug it and give it to a technician.
If someone has the skills, he only needs to desolder the small PM IC on the left side and that's it, the phone comes alive like a newborn, as you say it can also be done, but that does not solve the problem.
@@arturnn3754 i know, but not every people know how to open this phone. I just recommended the most desperate way to solve it without using any tools😢. Since people keep searching some ways to solve this issue.
Hello sir! What is the size of the BGA stencil?
Simply NOT executable at home by an ordinary person.
Which Hot Gun & Which Stencil Use In Your Pcb work Please Reply 🙏
www.aliexpress.com/item/32583722337.html
why you already suspected the power ic instead of cpu?
Sir branch solluga yan phone ipatithan irrukku PW ic problem sir pls
What it's cost?
Emmc power problem solve karne k bad dubara masla karti h ya thek rehti h
it's up to you, if you try, if you do a back job then rework the CPU
After doing this , It will happen again?
Try to rework the CPU
This is the permanent solution or temporary after doing this this will happened or not
Xiaomi Poco M3 Won't Turn On | Botched Repair Rescue | Tech Tomer
th-cam.com/video/Wr09F8p6J2U/w-d-xo.html
sal, g job, its working
One of the worst mobile I ever owned
IT TAKES MUCH HEAT, OF course, IT OPENS THE PROBLEM IS NOT THE CHARGING....
I.had a problem with Poco m3 Phone. Accidently I reboot the phone after that phone did not turn on again I gave to repair shop they told me that they cant repair there is any solution for turn on please. Do u have any repair shop please tell me
Xiaomi Poco M3 Won't Turn On | Botched Repair Rescue | Tech Tomer
th-cam.com/video/Wr09F8p6J2U/w-d-xo.html
Salamat sa share idol
Welcome to 😉
Sir my phone 38% charged how much time to draining
I broke my power button in this phone.. How can I turn phone with out it?
I'm sorry but you can't turn on the phone without the power button or power switch
@@techtomer thanks anyway!
Sir Yung Poco m3 ko namn renestart ko lang tapos Hindi na nag open tapos pinakita ko sa technician Pina initan lang ayaw parin mag open at mag charge trinay niya na eh charge kung makikita b na mag chacharge ayaw talaga mag charge boss...Sabi Niya baka board na daw Ang nasira boss...Tama kaya xia boss..Sana matulungan niyo Ako..salamat boss
Ganyan po talaga ang common issue ng mga poco m3
@@techtomer maayos pa b kaya Yung Poco m3 ko boss
@@romelpercil8666 yes po maayos pa yan hanap ka lang ng marunong gumawa
@@techtomer ok poh salamat
@@romelpercil8666 no problem po
I have a solution I hope you can solve the problem because I am the one who accidentally rebooted the phone and it won't turn on I did all the ways I was desperate for a week sent to the repair shop the phone technician said it can't be fixed I'm very sorry and so I leave my phone for 1 week, don't charge the battery. I repeat, don't leave it for 1 week. After 1 week, if you are sure that your phone battery is absolutely dead, try plugging in the charger. If the battery percentage goes up, your device is back to normal, good luck. Don't despair, believe me because I'm more desperate than you and more desperate than many people, but I was able to get through it.
ive been waiting for it to drain for nearly 4 months
If someone has skills, all you need to do is desolder the small PM IC on the left side, this little plate and that's it, the phone comes alive like a newborn, as you can say it can also be done, but that doesn't solve the problem and the phone will freeze. If you do as I wrote, you can turn it on and off whenever you want
same problem and when i pluge in my charger my battery percentage goes up ana i press to my power key to switch on but unable to switch on and battery pc also not showing again
nag back job sakin pag karaan i off cp .reahit ku nlng ulit buhay ulit cp
Xiaomi Poco M3 Won't Turn On | Botched Repair Rescue | Tech Tomer
th-cam.com/video/Wr09F8p6J2U/w-d-xo.html
i just realized only expert can fix this problem....
fxxxing xiaomi.....
Good solution
I can't turn on my Poco M3. After fully discharging and connecting the charger, it starts to charge and takes about 2A. After charging to 10%, for example, when I try to turn it on and press the switch, the current drops to about 0.100A and it does not turn on. A black screen remains, I do not show anything, not even the state of charge battery, but uses about 0.100A all the time. I disconnect the power and when it is completely discharged, I connect the charger and it charges 2A again, after pressing the switch it drops to about 0.100A again, and so on and on, which may be the reason.
Replace the battey first
The battery is good, I measured with a multimeter. When fully discharged it is charged to 100%. But the phone cannot be turned on. One time it fired for me, it worked until my daughter discharged it completely. After discharging it, I can not start it again and the symptoms are as I wrote.
@@arturnn3754 Try the solution on my video
I found a solution, but not with you, you need to desolder a small PM IC and that's it.
Power ic no pls
where are you from
I am from philippines sir.
wtf is this job even worth it for the costumer?
please help my poco wont turn on but it sometimes show the battery when charging
same problem facing by me