Did you end up getting the win? I saw yours after I picked the el-camino and had Holley change it. Later when they released the winners, it was still the El-camino.
@@DEBOSSGARAGE Someone from the staff stopped me on the way out Sunday,they told me we won an award but the guys at the Holley Booth couldn't if it was true or where to pick it up
@@DEBOSSGARAGE after watching this video Cain is Super Motivated to work on the truck, rebuild the engine, finish the turbo, get a/c ,complete the ramp etc... Thanks again guys !!
Do a hot rod build collaboration with at least 10 YT builders, each person does a particular job on their own channel and sends it on to the next.. Get as many heavy hitter sponsors as you can get At the end of the year auction it off and give the proceeds to a worthwhile charity
It says experimental right on the side, totally a flyer. They are restricted in horsepower so only about twice the power of a stock 172. But, they get about 4 times the ground coverage per gallon.
I know Cain is gone get some help from someone out there! Great of you to show that interview with them and get them some time on camera! Big props to you Rich!
Please do more content with Cain and his dad. Maybe take a trip to visit them or bring them up to the shop for a visit or something. Would be great to see.
You, Derek and Al n Woody in colab would be an amazing build!! And the 3 of you build something against bad obsession.. no doubt impossible but I reckon would be the biggest vid series on YT ever! 🎉 (Imagine the brackets!! 😅)
Luv'd this build. Watched the vids with my 85yo parents...my mom had a '55 second series when i was a kid. She remembered it very fondly over these episodes. 👍👍
Man, what a killer truck...love it! And actually there are quite a few LS powered aircraft flying as conversion kits are available, although they are rated "experimental"
Rich love the content....always excited when a DebossGarage vid comes in! Did you say boats? I'd love to see a restoration of an old 70's/80's performance boat (deep V, tunnel or STV) with a nice big 2 stroke engine on it! They're a lot of fun and with a 2 stroke set up (instead of a stern drive V8), not as much to go wrong 😁
I always enjoyed the agriculturual and commercial vehicles, I found Deboss because I was looking up something about tractors actually. A cool project would be you fixing up the old forklift in the shop, maybe do a fun but practical swap in it while also painting it.
Fernando is one cool dad for keeping his son Cain involved with that truck! How about Rich, Flying Sparks and some other bigger TH-camrs work with them to finish that build (if he would accept the help)?
What I really like about your channel is the camaraderie and fun and problem solving you do. You share the real process and the high and lows and show that hard work can overcome all of that. I'll be here watching whatever you decide to build next.
Honestly, with the Chevy starters, I think everyone should use a fender mounted solenoid. Move the main wiring to the fender, use a short pigtail from the main terminal to the activation terminal on the starter. It’s what I did with my square body, and power only goes down near the block and exhaust while the fender solenoid is engaged.
You definitely can put an LS in an airplane and fly it. That “experimental” sticker and classification open up all kinds of crazy contraption possibilities
I would love to see you guys do somesort of charity event for guys like Fernando and Cain. It doesnt need to be huge, rather it to be something that they will remember for years to come.
Wow…truck turned out fantastic. I’m excited to see this build get all the finishing touches, as well as the F-tree kitty back at the shop. I’m sure it won’t disappoint. Next build…what about another old muscle car with a modern power plant and drive train? Honestly…whatever you choose will be educational and entertaining. Great content…keep the videos coming!
Build a drag and drive vehicle, A good reason to come to Florida in the winter. You could also build a burn-out vehicle and try your luck at one of Cleetus's event's. another option to get out of Canada during the winter. The next build needs to be something unique, but also useful. One other idea I have is, find an older car hauler trailer. Like the ones that deliver vehicles to dealerships. You could use it to haul all your vehicles around and share them with the world. A rolling car show. At some point you are going to have to venture into electric power. add electric motors to a vehicle, but not like a hybrid. Add some power to the front wheels of something, like the new Corvette has on some models. either for more performance or better yet increased traction in a winter environment. Add AWD with the flick of a switch. I could go on forever, I have more ideas than the ability to do the work myself any more. Health issues have shut me down for some time now. Keep making video's and I will keep watching and enjoying them. Thank you.
Rich, they just about everything in planes nowadays. Electric and diesel. Yes, plenty of LS’s and just about anything in a boxer configuration. It takes some safety and gearing alterations but they work well.
Im sure it would be a logistics nightmare but more of this type of series visiting other TH-cam channels to do work on the ride you are in or even just going roadtripping to help them with stuff they are working on. I have found several other channels I like from this one and that shop banter friendship is fun. Not that I want to see you struggle but it is inspiring to see quality workmanship from a floor jack under a pop-up tent with basic tools once in awhile. Keep up the great work.
Thank you for sharing this build process with us. I started following along from the first video at StanceWorks. Truly inspiring to this project come together.
There are quite a few planes using not only LS but other automotive engines. My favorite that I’ve seen was a Van’s RV6 painted like a P51 with an LS1 from a corvette, complete with the corvette beauty covers on the top…trippy to see a big CORVETTE under the cowling!
Love it, as I do all the deboss videos! One correction though, if you check google/TH-cam you'll find heaps of planes using the LS. Most are boosted in some fashion, but they do fly. Cars, boats, toys, planes... the list goes on my friend
So glad you were prepared for that fire and it wasn’t any worse, literally had my heart racing on that one, I feel vested in this project haha! Happy to hear there is Audi content coming, I would be up for another wild car build like that, maybe build an off-road version similar to what I did with my Neoru.
tbh best thing about deboss is watching you Rich, workout a way to do something you not done before.. I enjoyed the audi build so much cause you have a good brain for figuring stuff out but without building racecars being a thing you had done or just followed how others had done it, meant the car is full of quirky solutions to problems. So what do I want to see? Nothing in particular, just something you have always fancied but never done and see the mad creation emerge.
Great vid, Rich. ....In answer to you.... I'd like to see more of the tank truck. fixed, so it drives decently... better steering arrangement, working shifters, working transmissions so you're not limited to 8 mph...your creations, your artistry in solving form/function puzzles. That sort of thing. Cheers mate! :) Mitch
Nice work everyone, good collaboration build. I’d love to see more stuff like this, you could go help some of these guys with their builds. And do some events, use the stuff you built. And maybe some charity work for kids
I want to see you guys have a clear safe view ; get a new windshield. Very nice build, you should get some of that sound deadening material , * maybe some new door latches, pump fires ? 🔥💸 *Spray the whole thing with that flat black Eastwood 2x. , stop the rust. Nice build, Apache is a one of a kind.
Shit! Someone cuttin onions around here? Damn. Didn’t realize that last part would get me! 😊 Beautiful way to end this build (“end” 😅). Congrats on a sick ride and kudos on your voting choice. Class act all around. 🙌🏼
Love the build. Kit cars and shows. Maybe go around and help others with there builds. Some of us has problems we trying to figure out and we get stumped on.
If you've never done a CONCOURS restoration, you would be surprised at the learning curve required. I just finished my 67 GTA Mustang last year. Owned it as my first car since 1978
Rich, any project YOU decide (as long as its cool) would be alright with me. It's the process that keeps me coming back every video. Any car from the 1900s to 1999 would be an good choice.
I loved the Audi build, all the creative problem solving and fabrication. I’d love to see you build your version of a “locost” 7, probably needs a diesel or some other wild engine. Definitely does NOT need to be fast. the standard style chassis will need some mods to fit you but it’d be a fun long term project.
Hey Rich go on do it build a Kit Car . There are many many kit car companies around . No idea how many there are here in the uk let alone in the USA / Canada. Love the look and the Stance of the 55 Apache . I for one would love to own something like that 100% . Regards Martin from the uk
Hey Rich, that was a really good series. How about doing a road trip with a 73 to 77 Pontiac LeMans or Chevelle from the same Era. A Ford Torino or early 70s LTD 4 door would also be cool. Maybe try putting a 5.7 Hemi into a large Chrysler. I like the big block boats and I have been wondering if a stock built modern engine LS or Hemi swap would give a big boat better mileage. Anyway whatever you choose I'll be glad to watch.
I have enjoyed this build very much. You have had a lot of problems but ultimately you worked them out. I just have one thing you need to change and that is those pair of shorts you had on. If you need to wear shorts try cut off jeans. Those suckers came from the 60's I know I had a pair. Love the programming. Keep it up.
My favorite part of this channel is the more heavy duty and ridiculous stuff, like the F350. A bota like you menioned could be cool, but anything with some ridiculous swap that shouldn't fit will be fun
Seems to me that those Holley electronics are a real pain in the butt. Dan at DD's speed shop finally took all the Holley Sniper stuff off of his '55 Nomad and put a pair of quadrajets on it. No more problems (or at least fewer ones). He couldn't get his car to learn or idle either.
One vacuum leak will do that. It usually is something mechanical stopping the electronics. Once I hooked up the catch can to the intake, it ran better. Even did autocross with it. The blue cap on the intake wasn't sealing 100%
Would love to see someone build up one of the old 2.2 turbo Chrysler platforms. See what can be done by chucking all the 80’s electronics and run it with modern ecu and efi.
There are quite a few flying LS airplanes. The weight just needs to be balanced front to back CG; the weight is fine for many mid sized 2 and 4 seat aircraft. The LS is very popular in WWII scale aircraft like the Mustang.They go really fast.
Rich love the finished truck ,we used to do a cheap guard flair in my teens 50years ago😢 put a block of wood on the tyre side wall and get a mate to slowly drive forward and as the wood block forces between the tyre and guard it flairs the guard out ,not pretty but as a teen on apprentice wages and wanting to put wide tyres on my old ford who could afford a panel shop flair job ,Love your channel How about building a myer manx beach buggy in Canada and drive it to California 😮😮 Cheers Kym Adelaide
You most certainly can put an LS in a plane that flies! There are lots and lots of experimental planes with LS engines, small block Chevy's, mine has a Ford V6 automotive engine in it! I'm not sure if there are more or less rules about doing that in Canada or not.
![Putting our Truck to the Ultimate Test… #ApacheStroker [EP14]](http://i.ytimg.com/vi/dRlHLtZlEFU/mqdefault.jpg)
![Putting our Truck to the Ultimate Test… #ApacheStroker [EP14]](/img/tr.png)
![Built a Truck in 15 Days to Drive 4000 Miles | #ApacheStroker [EP15]](http://i.ytimg.com/vi/ZUU3WHxrJAI/mqdefault.jpg)
What do you want to see us build next?
Cleetus N Cars burnout car or whatever. Ken Block tribute? Would be killer
1.9 Volkswagen tdi swap be nice
7.3 idi in a ferrari
One of the BIG SUV's, Suburban or Excursion maybe? :) With a engine swap of course ;) Or maybe something european?
I would like to see some kind of tractor build but that might be more for the HD channel.
Thanks for picking my Truck guys!! and for the interview,We hope to see You in another event and line up Our Apaches 🤘😎🏁🏁🏁
Did you end up getting the win? I saw yours after I picked the el-camino and had Holley change it. Later when they released the winners, it was still the El-camino.
@@DEBOSSGARAGE Someone from the staff stopped me on the way out Sunday,they told me we won an award but the guys at the Holley Booth couldn't if it was true or where to pick it up
@@DEBOSSGARAGE after watching this video Cain is Super Motivated to work on the truck, rebuild the engine, finish the turbo, get a/c ,complete the ramp etc... Thanks again guys !!
That is awesome.
No matter if you got an award or not you’re truly the winner
That was awesome spending time with Cain and Fernando at their rig, bravo sir, bravo.
🙏😎🏁🏁
That was what made me stop the video to hit the like button..
I don't understand why this build series doesn't have more views.
This is an awesome build.
Do a hot rod build collaboration with at least 10 YT builders, each person does a particular job on their own channel and sends it on to the next.. Get as many heavy hitter sponsors as you can get At the end of the year auction it off and give the proceeds to a worthwhile charity
THIS. 100%. Love when TH-camrs do charity. Restores my faith in humanity a little bit.
Yea I hope this is the winning what’s next!
Love that idea!
No. Definitely not interested in that. The build with skid factory was the limit.
38:00 if the plane is an experimental plane you can put an LS in it. You can do all sorts of crazy stuff under a experimental type
I second this, experimental is a wild catagory. Source: My pilots license and A&P license
It says experimental right on the side, totally a flyer. They are restricted in horsepower so only about twice the power of a stock 172. But, they get about 4 times the ground coverage per gallon.
I know Cain is gone get some help from someone out there! Great of you to show that interview with them and get them some time on camera! Big props to you Rich!
🙏😎🏁🏁
Please do more content with Cain and his dad. Maybe take a trip to visit them or bring them up to the shop for a visit or something. Would be great to see.
🙏😎🏁🏁🏁
You, Derek and Al n Woody in colab would be an amazing build!!
And the 3 of you build something against bad obsession.. no doubt impossible but I reckon would be the biggest vid series on YT ever! 🎉
(Imagine the brackets!! 😅)
Luv'd this build.
Watched the vids with my 85yo parents...my mom had a '55 second series when i was a kid.
She remembered it very fondly over these episodes.
👍👍
Man, what a killer truck...love it! And actually there are quite a few LS powered aircraft flying as conversion kits are available, although they are rated "experimental"
Rich love the content....always excited when a DebossGarage vid comes in! Did you say boats? I'd love to see a restoration of an old 70's/80's performance boat (deep V, tunnel or STV) with a nice big 2 stroke engine on it! They're a lot of fun and with a 2 stroke set up (instead of a stern drive V8), not as much to go wrong 😁
I always enjoyed the agriculturual and commercial vehicles, I found Deboss because I was looking up something about tractors actually.
A cool project would be you fixing up the old forklift in the shop, maybe do a fun but practical swap in it while also painting it.
Fernando is one cool dad for keeping his son Cain involved with that truck! How about Rich, Flying Sparks and some other bigger TH-camrs work with them to finish that build (if he would accept the help)?
🙏🙏😎🏁🏁
Good to see you rolling, Great to see the Father & Son truck!!!!!!!
Come on out to Australia and do something with the skid factory. That would be mint
What I really like about your channel is the camaraderie and fun and problem solving you do. You share the real process and the high and lows and show that hard work can overcome all of that. I'll be here watching whatever you decide to build next.
Honestly, with the Chevy starters, I think everyone should use a fender mounted solenoid. Move the main wiring to the fender, use a short pigtail from the main terminal to the activation terminal on the starter. It’s what I did with my square body, and power only goes down near the block and exhaust while the fender solenoid is engaged.
Man, you are building a very impressive collection, that truck is sick!
You definitely can put an LS in an airplane and fly it. That “experimental” sticker and classification open up all kinds of crazy contraption possibilities
I would love to see you guys do somesort of charity event for guys like Fernando and Cain. It doesnt need to be huge, rather it to be something that they will remember for years to come.
🙏😎🏁🏁
You think people remember with the three thousand projects on TH-cam?
@@Low760 I sure hope the people that have been affected by these charity events do rember it.
Wow…truck turned out fantastic. I’m excited to see this build get all the finishing touches, as well as the F-tree kitty back at the shop. I’m sure it won’t disappoint. Next build…what about another old muscle car with a modern power plant and drive train? Honestly…whatever you choose will be educational and entertaining. Great content…keep the videos coming!
Cain and Fernando FTW! You guys are a credit to Canada! Love the idea of a collab with an auction at the end for a worthy cause.
Thank You 🙏🙏😎🏁🏁🏁
Its summer tyme! SOME KINDA OF BOAT BUILD!
(excuse to be by water on hot summer days)
Build a drag and drive vehicle, A good reason to come to Florida in the winter. You could also build a burn-out vehicle and try your luck at one of Cleetus's event's. another option to get out of Canada during the winter. The next build needs to be something unique, but also useful. One other idea I have is, find an older car hauler trailer. Like the ones that deliver vehicles to dealerships. You could use it to haul all your vehicles around and share them with the world. A rolling car show. At some point you are going to have to venture into electric power. add electric motors to a vehicle, but not like a hybrid. Add some power to the front wheels of something, like the new Corvette has on some models. either for more performance or better yet increased traction in a winter environment. Add AWD with the flick of a switch. I could go on forever, I have more ideas than the ability to do the work myself any more. Health issues have shut me down for some time now. Keep making video's and I will keep watching and enjoying them. Thank you.
Rich, they just about everything in planes nowadays. Electric and diesel. Yes, plenty of LS’s and just about anything in a boxer configuration. It takes some safety and gearing alterations but they work well.
Im sure it would be a logistics nightmare but more of this type of series visiting other TH-cam channels to do work on the ride you are in or even just going roadtripping to help them with stuff they are working on. I have found several other channels I like from this one and that shop banter friendship is fun. Not that I want to see you struggle but it is inspiring to see quality workmanship from a floor jack under a pop-up tent with basic tools once in awhile. Keep up the great work.
Thank you for sharing this build process with us. I started following along from the first video at StanceWorks. Truly inspiring to this project come together.
Rich and team have some of the best content on TH-cam. I would like to see your town and contry next. Great sleeper potential!
All of the build’s are amazing! I think it it’s awesome how much scrap metal and used parts they use/re-purpose.
There are quite a few planes using not only LS but other automotive engines. My favorite that I’ve seen was a Van’s RV6 painted like a P51 with an LS1 from a corvette, complete with the corvette beauty covers on the top…trippy to see a big CORVETTE under the cowling!
Looks great - beach shots were a great idea. Well done all
Love it, as I do all the deboss videos! One correction though, if you check google/TH-cam you'll find heaps of planes using the LS. Most are boosted in some fashion, but they do fly. Cars, boats, toys, planes... the list goes on my friend
So glad you were prepared for that fire and it wasn’t any worse, literally had my heart racing on that one, I feel vested in this project haha! Happy to hear there is Audi content coming, I would be up for another wild car build like that, maybe build an off-road version similar to what I did with my Neoru.
If you don’t have at least one fire is it really a build?
tbh best thing about deboss is watching you Rich, workout a way to do something you not done before.. I enjoyed the audi build so much cause you have a good brain for figuring stuff out but without building racecars being a thing you had done or just followed how others had done it, meant the car is full of quirky solutions to problems.
So what do I want to see? Nothing in particular, just something you have always fancied but never done and see the mad creation emerge.
So much cool in one build Rich. Love this truck!👍
LOL Talk about jury rigging! You guys are great.
Next project was right behind you. The Half 911 is cool AF
Great vid, Rich. ....In answer to you.... I'd like to see more of the tank truck. fixed, so it drives decently... better steering arrangement, working shifters, working transmissions so you're not limited to 8 mph...your creations, your artistry in solving form/function puzzles. That sort of thing. Cheers mate! :)
Mitch
Nice work everyone, good collaboration build. I’d love to see more stuff like this, you could go help some of these guys with their builds. And do some events, use the stuff you built. And maybe some charity work for kids
We are and have been involved with Truth for Teens since the channel started.
@@DEBOSSGARAGE that’s awesome!
Great looking truck, love the stance, awesome Job done , good to have mates that love to help with your build , 👍🇭🇲
The Audi track car, k-100/ trailer/ tank are going to be awesome. I vote for some more adventures with Kevin. You guys make a hilarious pair. 😂
I want to see you guys have a clear safe view ; get a new windshield. Very nice build, you should get some of that sound deadening material , * maybe some new door latches, pump fires ? 🔥💸
*Spray the whole thing with that flat black Eastwood 2x. , stop the rust. Nice build, Apache is a one of a kind.
Road trips! Love this series!
@Turbo Cain. Your truck is pretty sweet.
Shit! Someone cuttin onions around here? Damn. Didn’t realize that last part would get me! 😊
Beautiful way to end this build (“end” 😅). Congrats on a sick ride and kudos on your voting choice. Class act all around.
🙌🏼
Awesome ride ! Ever thought of building an old slammed firetruck ? 40-50's vintage diesel beast Reo Speed Wagon would be cool !
Very KOOL Rich God Bless that Gentleman and his Son
🙏🙏😎🏁🏁
*this is the best job in the world* 🔥🔥🔥🔥
To be honest, I'm just impressed you had a fire extinguisher. 🤣 Man I'm loving this build. 👍
I would love to see your Take on a (Bandit) Style Trans Am I think that would be an awesome build
Love the build. Kit cars and shows. Maybe go around and help others with there builds. Some of us has problems we trying to figure out and we get stumped on.
If you've never done a CONCOURS restoration, you would be surprised at the learning curve required.
I just finished my 67 GTA Mustang last year. Owned it as my first car since 1978
You guys should definitely do a full build on a cheap deck boat or ski boat…of course with an LS swap
Love your channel. My son and I are looking for 65+ Corvair to restore and would love to see you do one first.
Rich, any project YOU decide (as long as its cool) would be alright with me. It's the process that keeps me coming back every video. Any car from the 1900s to 1999 would be an good choice.
That brings back memories seeing pismo beach. Used to ride there every summer
Kit car! Love to see you guys do a Factory Five or other kit maker and have it on the show!
Picked up my 03 rcsb it was intended to be swap into 50s chevy :). Sick build awesome thanks keep great builds coming
Builds, take a break, tour your Apache, promote your channel , enjoy the scenery ...
Love all of it keep on giving it Rich
Do something with Cain and his Dad. Great to see the Apache rolling and on its way north!
That is a great idea 🙏😎🏁🏁
Lookup Ray Watson's Bull Moose with the LS3, It was featured in kitplanes magazine a couple years back.
The Apache dad is top notch.
An old 50s to mid 70s station wagon would be a fun build and also great for long haul rides like power tour
I loved the Audi build, all the creative problem solving and fabrication.
I’d love to see you build your version of a “locost” 7, probably needs a diesel or some other wild engine. Definitely does NOT need to be fast. the standard style chassis will need some mods to fit you but it’d be a fun long term project.
Kit car sounds sweet road trip to events would be cool to see too
Excellent video. Keep up the good work. My idea for your new project is a deuce and a ½ just a thought.
Cat swap was probably my favorite build
I like the collaborations and crossover episodes. How about a land speed record vehicle, like Burt Munroe? Something out of left field.
Would be really awesome to see you build a Factory5 kit and add the Deboss flair to it
Hey Rich go on do it build a Kit Car .
There are many many kit car companies around .
No idea how many there are here in the uk let alone in the USA / Canada.
Love the look and the Stance of the 55 Apache .
I for one would love to own something like that 100% .
Regards Martin from the uk
This was a awesome build I’m a huge fan of the technical more rare stuff maybe a air cooled Duetz in a fairlane but always love a LS swap
It was awesome watching this series, I would like to see you do some towing with the Kitty F350. Love your videos keep it going.
Already towing the Audi around. Stay tuned
Great build!
Kit car would be great, Would love to see more of the audi too. Maybe do a cool swap in Saturn Sky or something
Hey Rich, that was a really good series. How about doing a road trip with a 73 to 77 Pontiac LeMans or Chevelle from the same Era. A Ford Torino or early 70s LTD 4 door would also be cool. Maybe try putting a 5.7 Hemi into a large Chrysler. I like the big block boats and I have been wondering if a stock built modern engine LS or Hemi swap would give a big boat better mileage. Anyway whatever you choose I'll be glad to watch.
I have enjoyed this build very much. You have had a lot of problems but ultimately you worked them out. I just have one thing you need to change and that is those pair of shorts you had on. If you need to wear shorts try cut off jeans. Those suckers came from the 60's I know I had a pair. Love the programming. Keep it up.
My favorite part of this channel is the more heavy duty and ridiculous stuff, like the F350.
A bota like you menioned could be cool, but anything with some ridiculous swap that shouldn't fit will be fun
You need to do an old station wagon! Great content!
Brilliant!
Next build do a Daytona Coupe kit car hill climber :)
I just found your site and so far have to say that I love your videos
Great truck! Would be awesome to see your take on a kit car! Would be insane I am sure!
Seems to me that those Holley electronics are a real pain in the butt. Dan at DD's speed shop finally took all the Holley Sniper stuff off of his '55 Nomad and put a pair of quadrajets on it. No more problems (or at least fewer ones). He couldn't get his car to learn or idle either.
One vacuum leak will do that. It usually is something mechanical stopping the electronics. Once I hooked up the catch can to the intake, it ran better. Even did autocross with it. The blue cap on the intake wasn't sealing 100%
Rich, the LS-3 is certified for aviation use in certain applications. Some Cessna and I belive Lancair, and Bull moose aircraft use them
Thanks! I saw a post about that about a week after making the video lol
Would love to see someone build up one of the old 2.2 turbo Chrysler platforms. See what can be done by chucking all the 80’s electronics and run it with modern ecu and efi.
Truck came out great, as far as next build, how about a Cummins powered fishing boat to go behind one of the pickups.
If you put an LS into a little 2 seater jet boat, that would be pretty crazy fun.
There are quite a few flying LS airplanes. The weight just needs to be balanced front to back CG; the weight is fine for many mid sized 2 and 4 seat aircraft. The LS is very popular in WWII scale aircraft like the Mustang.They go really fast.
Rich love the finished truck ,we used to do a cheap guard flair in my teens 50years ago😢 put a block of wood on the tyre side wall and get a mate to slowly drive forward and as the wood block forces between the tyre and guard it flairs the guard out ,not pretty but as a teen on apprentice wages and wanting to put wide tyres on my old ford who could afford a panel shop flair job ,Love your channel How about building a myer manx beach buggy in Canada and drive it to California 😮😮
Cheers Kym
Adelaide
You most certainly can put an LS in a plane that flies! There are lots and lots of experimental planes with LS engines, small block Chevy's, mine has a Ford V6 automotive engine in it! I'm not sure if there are more or less rules about doing that in Canada or not.
You have a pretty good Chevy line up already, just a couple more and you’ll have all the best model years, do a 67-72 4x4!
That truck is truly a work of art. Absolutely gorgeous, great work! PLEASE PLEASE PLEASE...DO NOT PAINT IT!! lol
Love the Vermont plates!
I chuckle every time I see rich in shorts. I didn’t think Canadians knew what shorts was lol great work to all
I vote for the Apache with the ramp for the young man.
Do a diy side by side that competes with razors and such. Go LS!
kit car awesome video. love the builds
The plaid shorts with the red check doeskin jacket😊
Rich, the epitome of Canadian redneck... Flannel shirt, Flip Flops, and shorts... Welding...