From the Field: Calibrate Grain Drill for Cover Crops and Polycrop Blends
ฝัง
- เผยแพร่เมื่อ 29 ก.ย. 2024
- Join Keegan Miller, Alberta territory manager, as he explains how to calibrate your grain drill to achieve the proper seeding rate for your multi-species cover crops.
If you have any questions, feel free to contact Keegan at 780-545-8098 or keegan@coversandco.ca
🌱To get to the calculator🌱
www.coversandc...
___________________________________________________________
🌱Find your local Covers & Co. dealer:🌱
www.coversandc...
🌱Stay connected with us:🌱
Facebook: / covercropcompany
Twitter: / covers_co
Instagram: / covercropcompany
Tik-Tok: / covercropcompanyl
On my 15 ft 1590. It takes 36 revolutions of the jacked up drive wheel to go 1/10 of an acre
Do the math from there
I fill the drill right full. To
Make sure head pressure isn’t a factor
Good point! Wonder how much difference that would make.
Can you make a video when your seeding your cover crops with the no till.
Absolutely!
That would be great. I use a Haybuster 107. Pretty common small no till. I would think that the calibration is very similar.