When you put jumper cables over one battery in a two battery 24v system, you get 12v even though they are connected in series. The disadvantage is that the machine’s charging system will put exactly the same charge back into both batteries even if one battery is more discharged than the other. You can run a 12v component off one battery in a 24v machine, but eventually that one battery will be dead flat while the other battery will still be full. The way around that is to use a 24/12 converter (essentially a transformer) and run your 12v components off that.
Pro tip..I have watched all of Chri's videos for years at 1.5 speed. I have limited time so it helps get it all watched quicker, plus these machines flat hustle that way. Plus it helps those southern boys speak at a northern speed. lol
The sound of the D6 is why most equipment operators are hard of hearing, no matter how tough you are you will lose hearing, a little bit at a time, there's no escaping that. People think they're being clever with the exhaust pipes and mufflers, they are only permanently hurting the operator, hearing loss never get better over time, once you lose some you're never getting it back.
You are absolutely CORRECT, David. I worked in a newspaper press room and mail room for 16 years, played in dance bands, and had my own printing business for 21 years and I'm one of the fortunate ones . . . at 82 I can hear very well. What? Huh? Well, married men just don't listen well. I think that's what my wife said but . . .
WHAT??!!?? Seriously ... yes. Run a WWII era D7 cable dozer for 8 hours. Straight pipe and loose floor plates. My head rang for 16 hours after that. Bad exhaust pipes on their old 9U series D6 pony didn't do me any favors either. I loved being on switch engines that were working hard. Like riding thunder, and the fireworks show at night, while assisting a re-routed coal train up Independence Hill, was a treat. Bonus was seeing cars pulling over on the highway running parallel to the tracks, so they could watch. Paying for all that now, though I can't say I regret any of it. At least not yet.
@@dafyd242 when you're a school bus driver, and have to have things repeated two and three times in normal conversation, but you can hear, quite well, that second grader saying a naughty word, from 2/3 of the way into the back of the bus?
Although the tracks are worn ,he is not letting them spin up to much ,seen more cat videos where the operator let's the tracks spin like a ferris wheel ,and they had good cleats ,think you'll find this machine won't be used in muddy jobs or he has the new set of shoes stached away for that Rainey day
I had one that was equipped with "slicks." Small airport machine, they allowed you to cross the runway without tearing it up. Inconvenient, helpless on snow, ice or heavy frost, but it probably saved me a lot of transmission work.
Ear muffs are necessary, sweet sound of the Cat is awesome from a distance. This Cat didn't come to play. I would not last very long without A/C. It's like driving a Nascar race car for 500 miles in the heat and noise.
Badass Cat-a dad of a friend operates one of these, and he has always worn a headset to reduce noise and sits on an impact pad to reduce the effects of constant jarring; he is 70, healthy, able to do about anything, and still runs heavy equipment whenever he gets an opportunity (which these days is pretty constant given the operator shortage).
Gotta love a high drive. Lgp version will go anywhere. I think these set the mark for all other manufacturers.. Most dozers copy the same basics with running gear and shape nowadays. In 20 years time, this thing will still be running
@@projectturbocoupe4897 it’s a grading dozer. Not a high sprocket pushing dozer. It does just fine. Honestly Komatsu makes arguably better dozers than cat but I’m gonna say that quite because I don’t wanna rile up all the cat fans. I have a 750 John Deere dozer and it’s roughly equivalent to a d6 and it out pushes any d6 I’ve ran
I assume Chris's Komatsu is just fine for what he needs... How much would it cost him to haul a bigger one around to all his jobs? More than it would be worth, I'm guessing.
I am guessing; that the recent DPF issue on the Volvo Excavator is hurtful in $ terms and Chris is infilling You Tube content with extra content to keep up You Tube revenue stream to fix the Volvo. The Dozer came back to life with a sensor, cheap ( Question Mark). This is not intended to be a kicking, but perhaps Chris could use this issue as an opportunity to try ans explain why things are so expensive in running plant. So does he build in a % factor for breakdown and wear and tear. Explain to the unknowing what costs!!! You may then help people understand why it costs $? to hire a machine and operator. Still a good channel.
Is there a difference between a full root rake like that versus the pin on style on your Komatsu? Does the full root rake allow more dirt to filter out than the pin on style? I understand why you go with the pin style since you use your machine for more than just clearing, just curious if this was better?
Lol reading the comments sounds like a bunch of whiny ass union operators, it’s a root rake tractor only. Damn boys get your asses on some old worn out machines and you’ll learn to appreciate your fancy company bought ones, maybe you’ll even become a real operator 🤷🏾♂️
In my personal experience ive never ran anything that could out push a cat...i love it when the muffler is missing sweet sweet music to my deaf ears lol
That one there had a little bit more ass behind it didn't it !! Man, it will take a pile and move it right on along .....lololol.... You was having way to much fun it that dozer Chris !! lolol... That was funny , when you told him , If you got to Hot, you was getting in the air one way or another !! lmao !! Great as always Man !! Have a Great Evening ..On too the Next !!
I went to school for heavy equipment and when I graduated I went to operating bulldozer for about 2 years so I have an appreciation for them I could watch these videos all day thanks for making this one
Jason Ramsey, that’s just what I told Chris you can’t beat those D6R’s The Best dozer that caterpillar ever built any of their R model dozers I’ve got thousands of hours on one the company that I work for owns two of them one of them is a 1999 model and the other is a 2002 model and I’m here to tell you you can flat ass clear some land, rake are push dirt with them if it’s dry.
Sure hate to see a fine piece of equipment ran into the ground! Glad Cris took the time to check the fluids and add what was needed. Might be the only love that cat has seen in awhile!
So many people focused on the sound and not a reasonable comment on the fact this is too big for many of Chris’ jobs. What if he gets a Komatsu like Dirt Boss. People like the sound of that machine and it’s smaller so more functional,,,,, it’s only Chris’ money,,,,, hahaha.
@@shitloveaduck oh I was just having fun bud. I realize Chris wouldn't want to have a machine like that. Transporting would be difficult and like you say his jobs don't require a D6.
Been a long time since I rode a D6. The last one I was on had no cab or air conditioner and had a straight pipe for a muffler. Real men have hearing loss...
From a practical standpoint I can see how the high sprocket has many advantages, but as a old operator of the 1960s I think the older models had more class.
I ran one of these d6s just last week for a couple days for a freind of mine that didn’t know how to use it looked just like this but with regular blade Chris
The first battery is 12v the second one is 24v. You must hook it to the positive and negative terminals on the first battery, if you ground it anywhere else you'll get 24v. I hook up my 963d every day to fill it.
Hey Chris those R model high track Dozers that cat come out with was the best dozers ever made you can flat ass cover some ground in a days time either clearing or raking with one if it’s dry but anyway brother a damn good video so you and John and yawls family stay safe and keep them coming and I know it was hot up in that baby without no AC.
That's awesome 😝 aways dreamed of a dozer the size of an oil tanker, ,,,, 🤔, bout let's say,,,, 280 million tons, couple o billion horsepower, ,,,you know, a real ground shaker from a mile away 🤠, just to play around on 😝✌️
Dig'n that D6R CAT with you driving.. Need to be playing Willie Nelson "On the Road Again", or whatever, in some ear muff''s while working that bad-boy. It seems to need slightly longer teeth on the bottom of the blade though so that more dirt will filter out while the brush is being pushed toward the pile. Just a thought. You always have such great videos.
She's still getting it done with 0% undercarriage, I don't think I've ever seen shoes that smooth before. You could probably even take it out on the highway without getting into. It definitely needed a new undercarriage about 10,000 hours ago, nothing some Jpaydirt maintenence wouldn't fix.
That’s Kitty Cat power son. She might leak a little oil and drink fuel vs sipping fuel. But she’s gonna get the job done. You can’t beat the power and torque or pre emission equipment. Buying new ain’t always best.
Must be lgp pads on those tracks "low ground penetrating!🤣could gather and push more debri with new grousers and drop it to second gear ,yaint movin material.unless its spillin over the mouldboard!
Who needs an excavator?! Just rig one of your buckets to the blade! It might be tricky getting the thumb to work and you might need a really big "shade tree"!! 🤣
![[UNCUT] “บอสณวัฒน์” ลากไส้!! ใครหนุนหลัง "แม่ตั๊ก ป๋าเบียร์" I คนดังนั่งเคลียร์ I 30 ก.ย. 67](http://i.ytimg.com/vi/QlD7mU2KKRk/mqdefault.jpg)
When you put jumper cables over one battery in a two battery 24v system, you get 12v even though they are connected in series. The disadvantage is that the machine’s charging system will put exactly the same charge back into both batteries even if one battery is more discharged than the other. You can run a 12v component off one battery in a 24v machine, but eventually that one battery will be dead flat while the other battery will still be full. The way around that is to use a 24/12 converter (essentially a transformer) and run your 12v components off that.
Running the fuel transfer pump for a few minutes is not a problem
@@chuckjames1943 And if you alternate batteries it's even less of a problem.
The other option is to run a split charge system with a battery equalizer. I use that system on my tow truck to run the recovery winch.
That D6 looks like it could use new shoes, not much left on the cleats.
Literally nothing
I never noticed it slipping.
You can sure tell it's been used
These are drifting shoes.
@@nitetrane98 Very heavy cat.
Pro tip..I have watched all of Chri's videos for years at 1.5 speed. I have limited time so it helps get it all watched quicker, plus these machines flat hustle that way. Plus it helps those southern boys speak at a northern speed. lol
I do the same!! 1.5 speed for sure!!
I do the same lol. Way behind and trying to catch up that way
Old pre emission dozer making the money. Chris's tier 4 final dozer parked with emissions problem. 😐
there ya go! the true definition of money changing hands!
= PRICELESS !!!!
There's nothing like an old CAT. If it stops it's out of fuel no shit electronics.
Sounds good too.
Its a C9 heui engine. Not as much electronics as a new one but has an ecm and etc. Rebuilt one last year.
Finally a bulldozer that can push stuff....
Yes and a CAT to.. :-)
D6 and up is a bad m......
You know why BECAUSE IT'S A PUSH OVER
Someone still needs to weld new bars on the trackpads. Thing has hardly any bite left on its feet.
@UCboTo9T_tep_t7mt6q3CX6g shut yo mouth 😂👌🏽
My equipment has the same safety feature a few minutes of belt squeal so everyone has a heads up the equipment is running.
I always thought it was the warmup alarm. Who would've thought the belt squeal was a multifunction warning device.
man, there aint nothing like the sound of a CAT diesel
Agreed! I grew up around Cat dozers, scrapers,... love the sound!
I agree with you on that one...
...when the turbo kicks in.
i was saying the same thing diesel and turbo sound
Yep, love the sound also!
Didn't realize they could actually move as quickly as that one does. Also, bet you sure felt it when that stump stopped the dozer in its tracks.
I dang near fell out of my chair when that stump showed up.seat belt time ,me thinks
In this video Chris works as the new guy for 12 bucks an hour.....
😁😁😁😁
😁😁😁😁
Shoot I bet Chris minimum pay for helping on jobs like this is no less than 50 an hr lol
I actually charged him to come help me
@@catbuildinginc And put up with him lol
@@catbuildinginc I waiting on my check to come in the mail
The sound of the D6 is why most equipment operators are hard of hearing, no matter how tough you are you will lose hearing, a little bit at a time, there's no escaping that. People think they're being clever with the exhaust pipes and mufflers, they are only permanently hurting the operator, hearing loss never get better over time, once you lose some you're never getting it back.
You are absolutely CORRECT, David. I worked in a newspaper press room and mail room for 16 years, played in dance bands, and had my own printing business for 21 years and I'm one of the fortunate ones . . . at 82 I can hear very well. What? Huh? Well, married men just don't listen well. I think that's what my wife said but . . .
@@nemo227 my dad always called that, selective hearing loss ;-)
Huh? What’d you say? 🤣
WHAT??!!??
Seriously ... yes. Run a WWII era D7 cable dozer for 8 hours. Straight pipe and loose floor plates. My head rang for 16 hours after that. Bad exhaust pipes on their old 9U series D6 pony didn't do me any favors either.
I loved being on switch engines that were working hard. Like riding thunder, and the fireworks show at night, while assisting a re-routed coal train up Independence Hill, was a treat. Bonus was seeing cars pulling over on the highway running parallel to the tracks, so they could watch. Paying for all that now, though I can't say I regret any of it. At least not yet.
@@dafyd242 when you're a school bus driver, and have to have things repeated two and three times in normal conversation, but you can hear, quite well, that second grader saying a naughty word, from 2/3 of the way into the back of the bus?
Now that dozer sounds like he’s got some balls
Squeaky belt at startup, did Cat do a collaboration with 1990s Dodge?
🤣🤣🤣🤣 Did'nt noticed if the starter goes Meow meow meow ! If so, yep, Dodge parts.
I thought it was a Diesel Creek video for a second 😄😅
As long as you connect to one battery it will be 12 volts.... if you connect to the very last battery pos and neg then it will be 24 volts.
The only thing that stopped the D6 was a tree stump, briefly lol
Chucky W omly due to the wornout tracks LOL
@@willemstreutgers1154 ...revenge was quickly delivered!!
This seems like the type of thing they would do at my job. "We got a master at operating excavators. Hmm, put him on the dozer."
Tgis way you end up with operators versatile on everything
Wear out a set of tracks. Lol
0:11 LOL OMG!!! I think this is the first time I've ever seen a dozer with bald tires. This thing was rode hard and put away wet.
The tracks are smooth so you don't tear up the ground. LOL
@@petenolte4192 There's more grip on an Oreo cookie
@@IR-nq4qvI think the Oreo has more
Although the tracks are worn ,he is not letting them spin up to much ,seen more cat videos where the operator let's the tracks spin like a ferris wheel ,and they had good cleats ,think you'll find this machine won't be used in muddy jobs or he has the new set of shoes stached away for that Rainey day
I had one that was equipped with "slicks." Small airport machine, they allowed you to cross the runway without tearing it up. Inconvenient, helpless on snow, ice or heavy frost, but it probably saved me a lot of transmission work.
Ear muffs are necessary, sweet sound of the Cat is awesome from a distance. This Cat didn't come to play. I would not last very long without A/C. It's like driving a Nascar race car for 500 miles in the heat and noise.
Simple solution, wear hearing protection.
Badass Cat-a dad of a friend operates one of these, and he has always worn a headset to reduce noise and sits on an impact pad to reduce the effects of constant jarring; he is 70, healthy, able to do about anything, and still runs heavy equipment whenever he gets an opportunity (which these days is pretty constant given the operator shortage).
It’s them older guys with years of experience, like the guy you mentioned, that I would trust the most.
How do you make Chris happy???..Give him a different tractor to drive
Man, the size of the rake & the noise of the D6. That’s a dozer that can actually push something. Earmuffs sure required.🎧Take care & cheers from 🐨🦘🥰
Gotta love a high drive. Lgp version will go anywhere. I think these set the mark for all other manufacturers.. Most dozers copy the same basics with running gear and shape nowadays. In 20 years time, this thing will still be running
I wonder pretty often if there's any buyers remorse over the Komatsu? It's the perfect size to be practical, just seems to be way down on power.
Definitely diff machines but the komatsu is still a good piece of equipment
@@paulriversred738 I agree. It does get the job done. Eventually.
@@projectturbocoupe4897 it’s a grading dozer. Not a high sprocket pushing dozer. It does just fine. Honestly Komatsu makes arguably better dozers than cat but I’m gonna say that quite because I don’t wanna rile up all the cat fans. I have a 750 John Deere dozer and it’s roughly equivalent to a d6 and it out pushes any d6 I’ve ran
@@Brandon_093 I hear ya. Komatsu makes great equipment. Seems to me the particular one Chris bought is just a little weak, but I'm not an operator.
I assume Chris's Komatsu is just fine for what he needs... How much would it cost him to haul a bigger one around to all his jobs? More than it would be worth, I'm guessing.
Belt squeaks and it doesn’t have AC…….but it also doesn’t have DEF or an EGR……..and it currently runs. No right answer to this one- haha
That dozer is ready for some tracks
I was just going to say the same. New tracks and some mid rollers.
Agreed
I can just picture Jeff with a big grin seeing you on a Cat bro. Great video by the way. Safe travels
I loved the look on his face when he thought you might be leaving in the beginning.
Now that sounds like a Dozer only problem is the door and window open.No Ac??
Typical for most elderly Cats!
Can't wait till your excavator's fixed. Love watching you work that.
Glad you are all getting along.
I am guessing; that the recent DPF issue on the Volvo Excavator is hurtful in $ terms and Chris is infilling You Tube content with extra content to keep up You Tube revenue stream to fix the Volvo. The Dozer came back to life with a sensor, cheap ( Question Mark). This is not intended to be a kicking, but perhaps Chris could use this issue as an opportunity to try ans explain why things are so expensive in running plant. So does he build in a % factor for breakdown and wear and tear. Explain to the unknowing what costs!!! You may then help people understand why it costs $? to hire a machine and operator. Still a good channel.
50,000 lbs of squealing fury. 🤘😎
Getting the job well done too🤷♂️😁
No AC, I would die.
If the AC breaks down it’s a major break down, we stop immediately & fix it
@@dirtfarmer7472 Rename AC to homicide prevention system.
No AC on the open station I use.
Chris, your air conditioned dozer is cool, but there is something about a big Cat doin it's thing that can't be beat....
how about a big cat doin it's thing.... with working air con?
@@AustinSlacker 7
d6 is not a big cat
@@sasquatch... It's bigger than a D3... LOL
Those tracks looking a little worn lol
summer slicks lol
The D6R is impressively speedy! Like my mom when we were late for church. Let’s go!
Chris Why do you stop short of the pile instead of pushing it into the pile?
Too much dirt the excavator will sift through it.
To allow some of the dirt to drop to ground and then you can 'roll' the debris with the rake. Reduces amount of dirt that gets into the pile.
Oh that sound!! If you had to describe the sound of “construction”, that would be it !!
Is there a difference between a full root rake like that versus the pin on style on your Komatsu? Does the full root rake allow more dirt to filter out than the pin on style? I understand why you go with the pin style since you use your machine for more than just clearing, just curious if this was better?
Lol reading the comments sounds like a bunch of whiny ass union operators, it’s a root rake tractor only. Damn boys get your asses on some old worn out machines and you’ll learn to appreciate your fancy company bought ones, maybe you’ll even become a real operator 🤷🏾♂️
That Bad Boy would be Dangerous on any Job. NO Air Conditioning in the Bulldozer. Not Good.👎
Ya got a nice touch on that tractor,mate
I do admire his skill however you are courting trouble working in timber in higher than low gear. "Been there" cheers from Aust.
So Chris.... what do you do in your SPARE time? 🤔😊
Work
Oooooooohhh Weeeeee! Dat bad cat eats through that stuff like a Louisiana fat boy in a boudin shop!....
Awesome that's the kind of jobs I like to run a dozer on
That 6R looks like it’d spin the tracks on dry pavement 😂
In my personal experience ive never ran anything that could out push a cat...i love it when the muffler is missing sweet sweet music to my deaf ears lol
It can RAKE! and doesn't sound like a drum full of hammers either!
That one there had a little bit more ass behind it didn't it !! Man, it will take a pile and move it right on along .....lololol.... You was having way to much fun it that dozer Chris !! lolol... That was funny , when you told him , If you got to Hot, you was getting in the air one way or another !! lmao !! Great as always Man !! Have a Great Evening ..On too the Next !!
It will take more than a few twigs to slow that bad boy down!
Chris, did the fuel pump work ok with the way he did it ? Thanks. Thumbs up.
I went to school for heavy equipment and when I graduated I went to operating bulldozer for about 2 years so I have an appreciation for them I could watch these videos all day thanks for making this one
The d6r in my opinion is the best dozer ever made.
Jason Ramsey, that’s just what I told Chris you can’t beat those D6R’s The Best dozer that caterpillar ever built any of their R model dozers I’ve got thousands of hours on one the company that I work for owns two of them one of them is a 1999 model and the other is a 2002 model and I’m here to tell you you can flat ass clear some land, rake are push dirt with them if it’s dry.
Can't beat a CAT dozer, even with wore out tracks, lol.
Hey Chris you wear ear buds or ear plugs with that D6 with NO AC ?
I'm pretty sure I've saw him always wearing hearing protection whenever running anything
He never wears hearing protection
No A/C, squealing belts on start, and droopy tracks. It need some let’s dig TLC…😏
Driving it like he stole it...way to put it through it’s paces.
Sure hate to see a fine piece of equipment ran into the ground! Glad Cris took the time to check the fluids and add what was needed. Might be the only love that cat has seen in awhile!
It seems the root rake on that doubles as a stump rake
You put it in high gear just to get the breeze to blow through didn't you??? LOL
Careful Chris... you run them Cats for long, you'll be trading up for a different shade of yellow ;)
I had to double check, I thought I was on fast-play. That machine can move.
Wondering how many hours on those track pads 🤔
I like the sounds coming from this D6. You've got to get one Chris. It's better for the CHANNEL.
So many people focused on the sound and not a reasonable comment on the fact this is too big for many of Chris’ jobs. What if he gets a Komatsu like Dirt Boss. People like the sound of that machine and it’s smaller so more functional,,,,, it’s only Chris’ money,,,,, hahaha.
@@shitloveaduck oh I was just having fun bud. I realize Chris wouldn't want to have a machine like that. Transporting would be difficult and like you say his jobs don't require a D6.
@@josephpegram1 - true, true. Sometimes I take things too literally!! Hahaha. Hope your evening goes well.
Been a long time since I rode a D6. The last one I was on had no cab or air conditioner and had a straight pipe for a muffler. Real men have hearing loss...
From a practical standpoint I can see how the high sprocket has many advantages, but as a old operator of the 1960s I think the older models had more class.
Major advantage of high track ease of service on final drives and transmission.
I see that dozer is equipped with the optional Goodyear racing slick pads. Optimal traction on the drag strip.
its using the the bolts as grouser lol
Cat D6R sounds a bit sweeter than Baby Dozer. Sorry Chris. :)
I ran one of these d6s just last week for a couple days for a freind of mine that didn’t know how to use it looked just like this but with regular blade Chris
Not the same without your commentary as you work
The first battery is 12v the second one is 24v. You must hook it to the positive and negative terminals on the first battery, if you ground it anywhere else you'll get 24v.
I hook up my 963d every day to fill it.
i was going to write the very same but you explained it well ran the fridge in my trucks for years that way never buggered a battery as there saying
Get some new pads that have actually have some grousers on them and it will sure enough push
Those tracks are defining worn but I didn't see traction being an issue at all.
Gooood evening from central Florida! Hope everyone has a great night!
Driving it like you stole it from a rental company 🤣! Where's the chrome stack?
I see that D6 has racing slicks on it. I bet that baby has great traction.
I was just thinking the same thing!
Hey Chris those R model high track Dozers that cat come out with was the best dozers ever made you can flat ass cover some ground in a days time either clearing or raking with one if it’s dry but anyway brother a damn good video so you and John and yawls family stay safe and keep them coming and I know it was hot up in that baby without no AC.
Hell Yeah Diesel Lots Power! That's Why I Bought Diesel Truck!💪🏻🤘🏻🔥
That looks like a letsdig18 burn pile
O D6 só precisa arrumar a esteira, maquina boa. Agora o operador kkkkkkkkkkkk, tem de ser demitido urgente. Só alisa e faz barulho.
I like that Kobelco 💪🏼💯💪🏼
YYEEAAHHHHH!!!
set of rippers to balance it would look better
Always a good job Chris! Thanks for sharing brother! 👌🏻👍🏻👍🏻
I've got to get a root rake for my old Terex dozer. Thanks for showing us what one can do, move a LOT of brush in a hurry and make a neat area happen.
great job buddy and great video as always buddy that dozers pipe sounds amazing 😎👊🏻👍🏻
Wow, that thing definitely needs some WD-40!🤔
That's awesome 😝 aways dreamed of a dozer the size of an oil tanker, ,,,, 🤔, bout let's say,,,, 280 million tons, couple o billion horsepower, ,,,you know, a real ground shaker from a mile away 🤠, just to play around on 😝✌️
Dig'n that D6R CAT with you driving.. Need to be playing Willie Nelson "On the Road Again", or whatever, in some ear muff''s while working that bad-boy. It seems to need slightly longer teeth on the bottom of the blade though so that more dirt will filter out while the brush is being pushed toward the pile. Just a thought. You always have such great videos.
Imagine if she has some new pads
Those track are basically slicks. You're riding on the bolts...tracks were wore out two years ago.
She's still getting it done with 0% undercarriage, I don't think I've ever seen shoes that smooth before. You could probably even take it out on the highway without getting into. It definitely needed a new undercarriage about 10,000 hours ago, nothing some Jpaydirt maintenence wouldn't fix.
That’s Kitty Cat power son. She might leak a little oil and drink fuel vs sipping fuel. But she’s gonna get the job done. You can’t beat the power and torque or pre emission equipment. Buying new ain’t always best.
Now thats a rake! Shame about the noise and rattles from it.
Do the CATS have DEF problems too?? If not I'd be shit canning those Volvos like yesterday!!
Just think of what you could do with a D9 or D10! You could rake everything up in one pass and make the Earth spin in the opposite direction! 😆 🤣 😂
Now we're talking! Really nice machines working. 😁
Must be lgp pads on those tracks "low ground penetrating!🤣could gather and push more debri with new grousers and drop it to second gear ,yaint movin material.unless its spillin over the mouldboard!
Having a big heavy high horse power dozer is like the women’s pet and men’s regret 😂
Who needs an excavator?! Just rig one of your buckets to the blade! It might be tricky getting the thumb to work and you might need a really big "shade tree"!! 🤣
With all of the land clearing being completed, why not get a large chipper/grinder to mulch it up for faster decay/disposition???