Bonito video, excelente herramiente para taladro de banco, lo unico es la prensa movible se levantaria en ocasiones por la fuerza, te sugeriria hacerles bisel y a la cuña q va abajo
Есть и за бугром рукастые ребята. МОЛОДЕЦ!!! Могу подсказать как сверлить круглые детали небольшого диаметра - привариваешь пластину квадратную к большому патрону. Зажимаешь кругляк в патрон ставишь на стол сверлильного станка и сверли на здоровье. Я себе такой сделал, главное угол 90 градусов между патроном и пластиной.
First , i say , you are very clever's, knowing woodworking's and metals works ! But.... One thing ' to say , you are two more steps to be professional 's !!! So !! Keep upgrading 's !!! Solid
Тиски получились хорошие. Но есть пара недоделок. Губки одна выше другой, планка на подвижной части ещё выше чем все остальные губки (10:19). Я бы выровнял. При зажатии детали прижимная губка перекашивается, ось расположена высоко надо бы её пониже сместить. The vise turned out good. But there are a couple of flaws. Sponges one above the other, the bar on the moving part is even higher than all the other sponges (10:19). I would level. When clamping parts clamping sponge is warped, the axis is located high it would be necessary to shift it lower.
NICE You could add a cross piece under the moving jaw to keep from lifting but then you would also need extra bars to lift it up so the cross bare runs free. I have a cheep clamp and replaced this part with harder steel because the original keep bending.
Two things: You are so good at making things. So grab an old tire and cut the tread to make the soles of a sturdy fair of work shoes that unless you unbelieveably clever you are going to need. scrounge leather from neighbors ox. Next time chuck your hole tap into your drill press. much straighter holes. make a wrench to turn drill chuck by hand, I know that would be a no brainer for you!! I will be watching!
Все OK но я сваркой все заварил,и не тратил столько болтов. Да и ещё вставкамкоторая соединяет винт прижимной и подвижную часть тисов,согнется от сильного усилия . Но все равно лайк. Красава
Video advice: if you film something, but don't use the audio (purely for example) like the part where you punched marks @ 0:58, don't bother recording the audio in the first place. You'll find that a decent chunk of the footage is going to be audio (depending on how it's recorded). So disable audio (most modern cameras, if not all, have that option) and save yourself transfer time, HDD space, editing time, hassles with encoding and so on.
Saludos excelente video muy pronto podre aserlo se ve facil pero sin las herramientas necesarias y con una lesion en el brazo no me es facil pero me servira de mucho para mis trabajos
For Dimension And More Information :- mistrymaketool.com/make-a-mini-metal-drill-press-vice/
G
Ū.
H nnnp
@@VitorFerreira-ih7bm 1swwwww
Make a glass of water with iron.
नमस्कार।इस विडियो के धन्यवाद्।बहुत बढ़िया तरीके से आपने यह वाइस बना कर बतलाइ है।स्वस्थ रहे सुरक्षित रहे सजग रहे,,,!
Proud to be a Tool maker🙂🙂🙂🙂
Молодец. Отличная самоделка. Лайк. Браво. 💥🤝🙏👍Пламенный привет с Татарстана
Awesome job bro.. All those DIY videos out there are not practical to make except yours.. Indian jugad jindabad..
You doing very good job 👍👍👍👍👍
Более всего порадовала сварка на полу в сланцах)))) Тисочки норм получились, зачёт!
Which language u can use
@@shivamyadav6370 русский!)))
👍👍👍t'es le meilleur !
I will be making a metal tool from this video. Try to develop more 👍👍👍
Very very good 👍 👍 👍
Of all the "vices" a person could have in their life, this is one of the best! ;)
to be honest as a mechanical engg student, Working with metals,tools is paradise
Super hero. Very nice
Good job.
The hand of the master is visible.
Cosa. Para. La. Casa
It is very good my friend
Very beautiful work
Gud job bhai bahut achhaaaa
Show irmão.. vou fazer uma amanhã cedo 😂👍
good job bro 😘
useful material, good workmanship, the result is very good
Great video bro i like it too much
Bonito video, excelente herramiente para taladro de banco, lo unico es la prensa movible se levantaria en ocasiones por la fuerza, te sugeriria hacerles bisel y a la cuña q va abajo
Great 👍 Very good job 👏
❤Good idea❤
Muy bueno, felicitaciones sr.
Классно получилось! Но я бы некоторые соединения обварил,вместо вкручивания болтов🤔
Да ну НАХ Серёга. А как же "трудности"? А как же воспитание характера в их преодолении?
Настоящие герои не ищут лёгких путей.=))))))
Clever! And fun to watch, but this is not for the typical homeowner.
Ustalarimiz harika isler cikarmislar kendilerine tesekur ederim super herkesin izlemesini tavsiye ederim
Lacking in resources but overflowing in imagination. My hat's of to you, sir.
Есть и за бугром рукастые ребята. МОЛОДЕЦ!!! Могу подсказать как сверлить круглые детали небольшого диаметра - привариваешь пластину квадратную к большому патрону. Зажимаешь кругляк в патрон ставишь на стол сверлильного станка и сверли на здоровье. Я себе такой сделал, главное угол 90 градусов между патроном и пластиной.
Зачётные тиски получились . То что искал . Пойду делать .
I'm very very proved pray for produce more more more nd more tools nd long life to the producer
Complimenti bel progetto, semplice e concreto, io ne ho fatta 1 riciclata... Stesso procedimento ma più grande. Di nuovo complimenti...
Very nice 👍
Me gusta mucho estos inventos .muchas gracias
First , i say , you are very clever's, knowing woodworking's and metals works ! But.... One thing ' to say , you are two more steps to be professional 's !!! So !! Keep upgrading 's !!! Solid
U r wrt sir
There r so many steps
Good job👍👍😁😁
мне понравилось! 👌👍👍
Esta bonito este proyecto. Maestro una pregunta se puede hacer todas las piezas soldadas, ya que no tengo cómo hacer los tornillos.
Hola mistry bendiciones quisiera una mesa cordinada sin soldadura bendiciones. Eres el mejor
Спасибо за видео очень доходчего
Классно! Автору спасибо!
I like it very much. Great job. Thanks for share.
You made metal vice from wooden vice..sounds interesting buddy
Make a glass of water with iron.
Artist👍👌💪💪
Qeik z zjFmcruif
Отличные тиски!!! Нужная вещь!!! Лайк!
Very good idea, I do DIY work, I like DIY work.
Perfect skill👌👌👌avesome poetry in motion
superb !!! i will make one thank s lot bro thanks a lot... it saves lot of money
esta página me gusta por que aprendo a hacer herramientas caseras muy buenas y a bajo costo gracias soy de puebla pue.
Great idea sir
Good job 👍👍
Hi! Congratulation! Your ideas are very nice and perfect. Tks a lot! Lourenço Brazil..
GOOD AND EASY JOB ....BRAVO !!!
good tools and great idea
Very good nice technical
You really are an artist.
Хорошая работа 👍
Mantaaap simpel 👍
Nice vise. Great little project for my kids to help make. I can get them to use my powerarc welder. They've always wanted to learn how to weld.
Тиски получились хорошие. Но есть пара недоделок. Губки одна выше другой, планка на подвижной части ещё выше чем все остальные губки (10:19). Я бы выровнял. При зажатии детали прижимная губка перекашивается, ось расположена высоко надо бы её пониже сместить.
The vise turned out good. But there are a couple of flaws. Sponges one above the other, the bar on the moving part is even higher than all the other sponges (10:19). I would level. When clamping parts clamping sponge is warped, the axis is located high it would be necessary to shift it lower.
Buenísimo el video, muy bien explicado y perfecto el trabajo hecho
Gracias
Very good Drill Vise!
Great job
Bravo çok güzel yaptınız tebrikler iyi ustasınız
Muy buena , lo felicito . siempre veo sus videos son muy buenos . Cuando puedas tiene que hacer una lijadora de banda , saludos desde argentina
Always finish it with a coat of paint and make it look professional. Good build.
Hola Mistry Make Tool, excelente video, mínimo uso de herramientas y resultado sorpendente, felicidades, saludos desde México
Make a glass of water with iron.
NICE You could add a cross piece under the moving jaw to keep from lifting but then you would also need extra bars to lift it up so the cross bare runs free.
I have a cheep clamp and replaced this part with harder steel because the original keep bending.
The one i built i made it with an angle so it cant lift instead of a cross piece. Still works and keeps it nice and flat
Beautifull video
Tengo poco de suscribirme la verdad son buenos tus trabajos felicidades y gracias por lo que aportas
Bravo majstori.
Felicitaciones por su creativa artesania
Its cool buddy
Good job!
great share :)
Very nice done.
nice idea and work,well done.
Good work, good idea!
Nice job i like it
My only question is why did you use both alen and slotted screws and why wouldn't you weld instead of bolting down?
You are very creative ... I like watching your videos👍👍
Very nice build, you made it look easy for the average person to do. I’m going to make 2 of them. Thank you!!!
Sar mathrel che mape sang a😭
Молодец успехов тебя
Mais um bom video ! i like..
Two things: You are so good at making things. So grab an old tire and cut the tread to make the soles of a sturdy fair of work shoes that unless you unbelieveably clever you are going to need. scrounge leather from neighbors ox.
Next time chuck your hole tap into your drill press. much straighter holes. make a wrench to turn drill chuck by hand, I know that would be a no brainer for you!! I will be watching!
El virginiano
Saludos desde Cali Colombia, gracias por su video
Good 👍
Just the Vise I need for my drill press - oh! Love the wooden vise too !
Все OK но я сваркой все заварил,и не тратил столько болтов. Да и ещё вставкамкоторая соединяет винт прижимной и подвижную часть тисов,согнется от сильного усилия . Но все равно лайк. Красава
Can you please suggest me the name of that tool you used to make the hole for nut or can you plz send me the link from where I can buy this
Bom dia parabens pelo projeto da morsa gostei
I really love these metal works
Great work, bravo.
Se podrá soldar en vez de ponerlo con tornillos?
Зачем все эти заморочки с болтами, если есть сварочный аппарат?
Дороже выглядит
Он варить не умеет.
Ему босоногий раб варит
@@aysik-bab Гайку же приварил.
при сварке выгинает пластину.
Video advice: if you film something, but don't use the audio (purely for example) like the part where you punched marks @ 0:58, don't bother recording the audio in the first place. You'll find that a decent chunk of the footage is going to be audio (depending on how it's recorded). So disable audio (most modern cameras, if not all, have that option) and save yourself transfer time, HDD space, editing time, hassles with encoding and so on.
Nice job
Very good system
Saludos excelente video muy pronto podre aserlo se ve facil pero sin las herramientas necesarias y con una lesion en el brazo no me es facil pero me servira de mucho para mis trabajos