Dear sir, We are in pressures vessel industry where we make many miter bend, above videos shows how to make the elbow, but it doesn’t show the orientation of weld seams, for each part there will be a separate weld joint and each joint must be away from each other. It will be great help if You how to do it. Thanks a lot for your great helpful videos, I am learning a lot from it.
Thank you for your useful video. I had a question about how the inlet and outlet diameters of this channel would be designed if they were not the same and if the channel was made up of 5 pieces?
hello. I have been watching your videos for many days. they are really helpful, i have learnt many things. Now I request you to do some videos on how we can install easily "Power Surface" and "SolidCAM" on solid works. It will be very helpful if you do it. Thank you
Excellent. I have a job I'm bidding that will require exactly this. Now, how would you measure what the outside radius of the elbow is if you're trying to re-create an existing one? Same typical way you'd measure a corner radius on any given object? Or is there anything special when it comes to a segmented elbow like this?
when i do the shell part, the other face still in the part. what i mean is that one one face is removed untill the second face only. the second face still exist, how can i solve this problem.
Hello and thank you for the tutorial. The thing is when you pattern the elbow parts , you get 1874.54 as shown in your drawing. and when we make the perimeter calculation we get=3.1416 x 600=1884.96 How we can resolve this problem? Thank you.
Please give the details of transition piece Circle dia 4980 Rectangle dimensions 4398 and 4567 Length bw transition piece 2500 Please solve it and give a lecture
Sir cleane room furniture items vidios requirements like sheos lockers, staff lockers dust bin, crossover beanch, cabinet, all pharmacutical company required in solidworks tutorial please
Really grateful for the existance of such channel on TH-cam 👍👍
Learnt Sheet metal with the help of your channel in August 2023...I'm grateful always!
I appreciate all your teachings, and your generosity in sharing your knowledge. I suscribe
Dear sir,
We are in pressures vessel industry where we make many miter bend, above videos shows how to make the elbow, but it doesn’t show the orientation of weld seams, for each part there will be a separate weld joint and each joint must be away from each other. It will be great help if You how to do it. Thanks a lot for your great helpful videos, I am learning a lot from it.
Too Good, Thanks for the video. Learnt a few quick tricks in the process as well.
Excellent job sir, i am reqular viewer of yur channel and taken lots from you
Thanks! wonderful SOLIDWORKS instructing videos! 😎
Спасибо за видеоурок! Как всегда, все понятно и доходчиво. Успехов.
Excellent educator, Thank you
Great Job as usual..tks for thinking of the little guy for explanation...
Thank you very much your video helps me a lot, you make everything easy. God bless you
Thank you for your useful video. I had a question about how the inlet and outlet diameters of this channel would be designed if they were not the same and if the channel was made up of 5 pieces?
hello.
I have been watching your videos for many days. they are really helpful, i have learnt many things.
Now I request you to do some videos on how we can install easily "Power Surface" and "SolidCAM" on solid works. It will be very helpful if you do it. Thank you
Beautiful PROJECT sir
5 stars, excellent.
Good work.. But there will be a big problem. In actual life we avoid to make any.. Cross Weld.. So some parts must be mirrored
Thank for teaching us
Excellent. I have a job I'm bidding that will require exactly this. Now, how would you measure what the outside radius of the elbow is if you're trying to re-create an existing one? Same typical way you'd measure a corner radius on any given object? Or is there anything special when it comes to a segmented elbow like this?
Muy rápida la explicación 👍🏽👏🏽
amazing lesson
Very helpful video for beginners. Can you guide in drawing a duct which has one face circular and the other a square?
Thank you for this video man I really like it thanks
Good tutorial, well done.
Thank you sir
Thanks for the great video. How about a mitered reducing elbow? I'm having a hard time modeling it.
thank u , very helpful
İ like your video very much. thank you. But can we show both of suppressed and unsupressed models at the same drawing sheet?
i have a question, you have to consider that 1 mm when you delimit, right?
challenge for you ... can you flatten conical helix variable steps
Sir please make a video on volume of A cylinder cone and other shape 🙏
Thanks for your tutorial.
Informatives Video.Danke
Circle radius is equal so don't dimension twice
Sir,
Very nice.Thank you
I did like your instruction but it noticed that: "fail to save file", can you tell me the reason, thank you!
I am in SolidWorks 2019 and I can't use the edge of the cut in the middle of the pipe to make a bend, what should I do?
hi sir Iwant to know how can print this flattern with a simple printer and a4 paper in real size for cutting with hand tools .thanks
Instead of using shell command in the beginning, can we use Thin Feature while using Swept Bose command? How is this different?
Sir tell me how to measure radius in autocad which according we can marking on sheet
Thanks for the video.
sir got question do you think you can measure 656.89 on an a sheet metal? or do you have to round it to 657.9?
Good Job
Please make a video on how to convert solid work to AutoCAD with exact dimensions for any drawing
Bro before my forming tools were small in size now its extra big how to adjust size of forming tools
when i do the shell part, the other face still in the part. what i mean is that one one face is removed untill the second face only. the second face still exist, how can i solve this problem.
Thanks !
Thank you sir.....
Is there any way to have alignment tabs to keep the elbow pieces at the correct orientation?
Thanks for your sharing.
Can you make same tutorial but in Inventor ?
What type of mouse or controller do you use for Solidworks?
Hello and thank you for the tutorial.
The thing is when you pattern the elbow parts , you get 1874.54 as shown in your drawing.
and when we make the perimeter calculation we get=3.1416 x 600=1884.96
How we can resolve this problem?
Thank you.
When you convert to sheetmetal, ensure the K factor is set to 0.5
Can this be done with a cone?
good job
Thanks from my hart
I am looking for a similar elbow but the one I need is square not rounded, do you think you can help me?
Make a square sketch as your sweep.
Video is unclear, Could you show the section and interferring parts at end of the video?
excellent.
I cannot select insert bend on edges..it's showing 'this edge cannot be selected'.. could you please help me with this?
I recommend you to choose the hole face, and then convert entities, then trim additional lines and keep the edge you want to choose.
Sir can you it on cone at 120 degree
What type of elbow is 1R,1·5R,2R..there must be some standard dimension.
Please give the details of transition piece
Circle dia 4980
Rectangle dimensions 4398 and 4567
Length bw transition piece 2500
Please solve it and give a lecture
Hai Good evening
how create bill of material sir
Sir...weldment ke upr koi video bna do.
HOW TO MAKE SHEET METAL EXHAUST DUCT WITH DIFFERENT CROSS SECTION ON BOTH END. ONE SIDE RECTANGLE AND OTHER SIDE CIRCLE
I would use a loft with two sections, one rectangle and the another circle and a path, then divide as the video.
would you help me with a link for solidwork software and the crack
perfect
Structure system ka use kese kare?
What is the reason to give a insert bends
Dalvadi Gaurang without bend insert cant be flatten the pipe sheet, we need flatten face for cutting.
Sir cleane room furniture items vidios requirements like sheos lockers, staff lockers dust bin, crossover beanch, cabinet, all pharmacutical company required in solidworks tutorial please
Thanks
Great ...
Hello, greetings
is it his original or pirated solidwork ??
This is the fastest way to do this
please how make a cantileaver steel bridge a video
Why There isn't a button for repeating this process insted of wasting time doing it all again?
You can make a macro to do that I believe.
Explain 60 degree elbow
What if the elbow is less than 90 degrees?
Just make the degree measurement in the beginning. Instead of a quarter circle. I just did one at 72°
And how do you do a conic curve? With different diameters...
nyc
my insert bend option not showing !!
hai airtel > goto search command bar type as "Bends" r goto Insert>Sheetmetal>Bends.. i hope u it will work....
Are bhai hindi mein bhi bataya kro yar 😊
Do you have any institution
not yet have future plan,
c'est beau
😮
Ok
Your tutorial is fine but video do not clear
hocam bu çizim çok kolay bir çizim
madep
yyy
Very poor soluctiion
thanks
excellent.