I have this machine.... I think my machine needs a bit of oiling because if I press down on the foot then it gets stuck ...the machine is on but it doesn't want to move... until I turn the balance wheel then it starts sewing.... It happens a lot. & No where in my town is a shop that sells sewing supplies ...& I can't get out of town whenever I want to go buy sewing machine oil...
Remember the owners manual is only showing you the most basic maintenance instructions, with how far you took your machine apart everything that moves needs to be oiled, for instance you only oiled the upper sleeve bearing for the needle bar there is one lower on the shaft as well just where the shaft or needle bar goes up into the machine.
This tutorial is great, step by step and makes machine maintenance feel easy
Happy to hear that, thank you for the feedback, much appreciated.
I have an old Empisal machine, it was my mom's. Thanks so much for this tutorial!
Thank you very much. Found thread in bobbin casing. All cleaned out and oiled, side cover all cleaned too. Problem solved. ❤
Thankyou so much, your video was very helpful
Helpful 💯
Thank you 🌺
This was helpful thanks, mine the handwheel is stuck, please help
Quite detailed...
I have this machine.... I think my machine needs a bit of oiling because if I press down on the foot then it gets stuck ...the machine is on but it doesn't want to move... until I turn the balance wheel then it starts sewing.... It happens a lot.
& No where in my town is a shop that sells sewing supplies ...& I can't get out of town whenever I want to go buy sewing machine oil...
How to set the screw next to bobbin.
Remember the owners manual is only showing you the most basic maintenance instructions, with how far you took your machine apart everything that moves needs to be oiled, for instance you only oiled the upper sleeve bearing for the needle bar there is one lower on the shaft as well just where the shaft or needle bar goes up into the machine.
Thank you, l will definitely oil the parts l left out. Much appreciated
I asked to oil the machine and not how t build it