PETSFANG BULLSEYE TIME LAPSE ENDER 3
ฝัง
- เผยแพร่เมื่อ 14 ก.ย. 2018
- This is the 2nd Petsfang 3d print. I learned alot from my first print, so now for the best print.... take two. I printed this at 0.2 layer heights with 50% infill, all supports over hang 70%, build speed 60, supports only from build plate, as per the PDF off of thingiverse.
thanks for watching.
www.thingiverse.com/thing:275... - แนวปฏิบัติและการใช้ชีวิต
im about to try to print one