S4E4: 2005 Gen 2 Toyota Tacoma Bucket Seat Swap From Bench - No Drilling!

แชร์
ฝัง
  • เผยแพร่เมื่อ 18 ม.ค. 2025

ความคิดเห็น • 40

  • @AustinChandler-h2f
    @AustinChandler-h2f 2 หลายเดือนก่อน

    You saved my life in Engineering school, now you are a life saver for Tacoma mods! Didn’t know you liked imports too. Huge help. Thank you very much. I bought 2014 4Runner seats and I’ll be trying to wire the electric seat movement

  • @charleshollis6630
    @charleshollis6630 7 หลายเดือนก่อน +4

    Thank You!!!!!! I will be attempting this on my 2008 Tacoma , I got buckets from a 2014 Tacoma.

    • @cody_whitt
      @cody_whitt 3 หลายเดือนก่อน

      Did it work ? Got a 07 Tacoma and want to try it with 2011 seats

    • @redneck1737
      @redneck1737 2 วันที่ผ่านมา

      @@cody_whittthey should all work for each other, they didn’t change the seat design

  • @igp808
    @igp808 2 หลายเดือนก่อน +1

    I got a set of bucket seats from a 2010 X-Runner and installed them in my 2005 regular cab Tacoma, replacing the bench seat. The X-Runner seat mounts aligned perfectly with the bolt receivers in the Tacoma. The driver seat belt wire harness connected with the Tacoma’s harness, however there weren’t any harness in the passenger seat that matched the Tacoma’s passenger side wire harness. Due to this issue, the airbag dash indicator stays on. Since the bench seat was discarded before seeing this video, I now have to find one to take the seat sensor and install it in the X-Runner’s passenger seat. This seems to be the solution to resolve the airbag indicator on my dash.

  • @FestusHaggen-e5u
    @FestusHaggen-e5u 9 หลายเดือนก่อน +1

    Thank you for posting this video. This is exactly what I want to do to my 2005 Tacoma.

    • @PaulGrishko
      @PaulGrishko 8 หลายเดือนก่อน

      how did it turn out?

  • @BummMuncher
    @BummMuncher 4 หลายเดือนก่อน

    exactly the video I was looking for. my man

  • @rogerlukas2481
    @rogerlukas2481 ปีที่แล้ว +1

    Great video!! I’ve been looking for this video for a long time. But I need to see more details. What else on wiring and seatbelt buckles. Thanks and Happy new year!

  • @8465000
    @8465000 ปีที่แล้ว

    been waiting for this video for ever!

  • @papolo1966
    @papolo1966 9 หลายเดือนก่อน

    Fenomenal video. I'm fishing to do the same thing on my truck thanks to this video. the bench seat feels like a park bench to me, I'm done with the bench.

  • @danstoisor4563
    @danstoisor4563 6 หลายเดือนก่อน +1

    I want to do this but in reverse! I want bench seats instead of buckets in my 07 tacoma 4s at
    any leads for finding a video tutorial?

  • @1234jhanson
    @1234jhanson 9 หลายเดือนก่อน

    Yep

  • @Lou_X2
    @Lou_X2 หลายเดือนก่อน

    Do you think those would fit in the 95 Tacoma? What’s the width measurement?

  • @MrMegabird
    @MrMegabird 9 หลายเดือนก่อน +1

    So correct me if i’m wrong but what exact electronic connections are made in the swap? Both seat weight sensors? Is there a center one and if so what is done for that? I have a set of 2006 bucket seats i found at a scrap yard, both manual w/o airbag.

    • @1234jhanson
      @1234jhanson 9 หลายเดือนก่อน +1

      Only weight sensor is the passenger seat on the bench. If you pull you harness off the bench, the only connections you will make is the two seatbelts.easy peasy!

    • @MrMegabird
      @MrMegabird 9 หลายเดือนก่อน +1

      @@1234jhanson i assume those seatbelt connections are self explanatory, and i have to reuse the floor mount seatbelt female holsters while discarding the seat mounted ones from the 4runner seats.

  • @caltonsalzman2149
    @caltonsalzman2149 9 หลายเดือนก่อน +1

    Did you ever figure out the wiring for the seat heater? Picking up a pair of seats this weekend

    • @1234jhanson
      @1234jhanson 9 หลายเดือนก่อน

      Not yet but I haven’t had a chance to experiment yet. Let me know if you figure it out

  • @MrMegabird
    @MrMegabird 9 หลายเดือนก่อน +1

    For the center console, did you find bold or screw holes existing under the carpet or did you drill your own?

  • @satchelcasalini7874
    @satchelcasalini7874 9 หลายเดือนก่อน +2

    I have fully completed swap let me know if you have questions.

    • @PaulGrishko
      @PaulGrishko 8 หลายเดือนก่อน +1

      do tacoma bucket seats fit?

  • @3headsprod
    @3headsprod 11 หลายเดือนก่อน +1

    Hello there, my bench seat is very painful, I have a pair of seats I could get but they are out of a 2005 4 Runner, do you think they would work? Your answer is greatly appreciated! Thanks Philip.

    • @1234jhanson
      @1234jhanson 11 หลายเดือนก่อน

      4th Gen 4 runners are 2003-2009. They should all have the same bolt pattern on the floor. I don’t see why they wouldn’t fit perfectly. Good luck!

    • @satchelcasalini7874
      @satchelcasalini7874 9 หลายเดือนก่อน

      Ever do the swap

    • @3headsprod
      @3headsprod 9 หลายเดือนก่อน

      @@satchelcasalini7874 I did swap the seats out,however I bought some bucket seats from the same year tacoma. Could not figure out the airbag wiring. So I left everything intact under the seat. I will have to to do something about it before my inspection sticker is due. I used 4 bolts that attached the back of the bench seat to bolt down the buckets. What a difference these have made!

  • @sbarsenault
    @sbarsenault ปีที่แล้ว +1

    Great video. I’m 6’3” tall does this seat create more or less headroom?

    • @engineeredchannel5649
      @engineeredchannel5649  ปีที่แล้ว

      I’m about the same height. No problem for me. Maybe very slightly higher. Of course I was sitting in a hole in the old bench seat so….zero regrets so far!

  • @PaulGrishko
    @PaulGrishko 8 หลายเดือนก่อน +1

    will the tacoma bucket seats work?

    • @engineeredchannel5649
      @engineeredchannel5649  8 หลายเดือนก่อน +2

      I’m sure they will. If the thick backed 4 runner seats work, those Tacoma seats should as well. The seat bolt pattern should be exactly the same.

    • @PaulGrishko
      @PaulGrishko 8 หลายเดือนก่อน

      @@engineeredchannel5649 thank you.

  • @MrMegabird
    @MrMegabird 9 หลายเดือนก่อน

    how did you do the brackets/install on the xterra console?

  • @papolo1966
    @papolo1966 9 หลายเดือนก่อน

    Did you reused the entire wiring harnnet from the bench, seat to be use with 4runner seats? is the same size connectors?

    • @1234jhanson
      @1234jhanson 9 หลายเดือนก่อน +1

      Yes, reused the entire harness. Plugs are the same

  • @Eduinox20
    @Eduinox20 10 หลายเดือนก่อน

    Hi me friend what car model exactly is this new seats

  • @nathans5506
    @nathans5506 10 หลายเดือนก่อน

    Hi, do you know if these would work on a 2014 tacoma?

    • @1234jhanson
      @1234jhanson 10 หลายเดือนก่อน +1

      Don’t see why not. Exact same cab

  • @korobuildschannel597
    @korobuildschannel597 ปีที่แล้ว

    Great vid! Thanks.