I am installing my ALG in my FM-AK47-11 tomorrow. Watched the ALG video which was helpful, but your video was great. The close up camera work was super and I feel real comfortable in making the install myself. Have done a lot of work on ARs and this will be my first work on the AK. Thanks for the excellent video.
Trigger went in perfect. Did have to use the safety roll pin to work with Krebs VII safety. No issues with trigger reset using the ALG High Energy spring on the FIME Molot Vepr.
Trigger is super crisp compared to the Arsenal style trigger that came with the gun. I was concerned the weight was going to be a little light, but that is not the case. I like the profile on the Lightning Bow trigger; same as I have on my Tavor. I'm not sure I could have asked for a better trigger for $60.
Amazing video guys! Also the intro was funny, and so you know some of us do care. Trigger installed on my FIME Molot VEPR in about 10 minutes with help from your video. No modifications at all... just straight drop in. Thank you Ken and Scott for the amazing job you did presenting this in an easy, and concise manner. Wish you guys all the best!
Just picked up the ALG recoil spring for my Circle 11 1969 parts kit. Im pretty sure thats the OG spring from 69. Next is a KNS has piston. My shells are getting launched into the next zip code. 😂
Great video but complete and total understatement about how much of a PITA it is to compress the ALG recoil spring and get it back together, lol. Thanks for the video though, it was very helpful! Also, if anyone is in the same boat I was, I had a 1970 Izhmash parts kit build and the carrier was jumping the rails if charged too slowly...this recoil spring fixed the issue and it now cycles reliably even if you ride the bolt back too slowly.
my recoil spring just pull spring bake and pull down on roll piece and slide it out to the side. just has a slot in it. id get rid of that find one easier to take spring off and on. the E clipsb never seen those on a ak those seem about the hardest pin retainers to usemine had original spring type got rid of that first thing went to the plate type
I heard you can use the cap from the cleaning kit or a 12 gauge shell to contain the spring instead of tying it. I haven't tried it yet,though. I just try to be careful,have been bit a few times though!
Nice video guys! I have the ALG trigger , ALG Power Spring , Krebbs fcg retainer, and the Power Custom extended axis pins installed in my Arsenal slr107, what a nice rifle it is to shoot! (extended axis pins) 😎
Great video on the install. Very good close camera work. When I installed the ALG ak trigger with the high energy main spring with and without the auxiliary trigger spring the trigger would not reset while holding the trigger back. It would reset on its on if I let go of the trigger and charged the bolt. I reinstalled the stock braided spring and it functioned fine. I did not shoot the gun with the high energy spring installed. It seemed that the hammer was stuck under the hook of the disconnector. It instead of the hook on the trigger. You could ease the trigger foreword with the side of you trigger finger to let the trigger reset. This did this even after I lubed the indicated areas on the directions. Any thoughts or suggestions? I'm definitely pleased with the trigger and trigger pull. Just confused about the high energy mainspring. Thanks
Great video , sweet gun but should've just added wood or hogue grip . lol .. putting ALG trigger in my vepr fm47-11 😉 this week as it's already been ordered to finish it off already added zoukuf folder stock and did all plastic od green , hogue grip , krink break , 3x prism red Dot on utg pro mount 👍👍😀😀 built like a tank
Thanks for all of the detailed close up views, as well as, the tips and tricks along the way.
You are welcome, thanks for watching!
I am installing my ALG in my FM-AK47-11 tomorrow. Watched the ALG video which was helpful, but your video was great. The close up camera work was super and I feel real comfortable in making the install myself. Have done a lot of work on ARs and this will be my first work on the AK. Thanks for the excellent video.
Trigger went in perfect. Did have to use the safety roll pin to work with Krebs VII safety. No issues with trigger reset using the ALG High Energy spring on the FIME Molot Vepr.
Awesome glad our video helped you out, what do you think about the feel of the trigger?
Trigger is super crisp compared to the Arsenal style trigger that came with the gun. I was concerned the weight was going to be a little light, but that is not the case. I like the profile on the Lightning Bow trigger; same as I have on my Tavor. I'm not sure I could have asked for a better trigger for $60.
I agree. The detail explanations was great help.
You earned my Subscription with the detail you gave in this video. Thank you much.
Amazing video guys! Also the intro was funny, and so you know some of us do care.
Trigger installed on my FIME Molot VEPR in about 10 minutes with help from your video. No modifications at all... just straight drop in. Thank you Ken and Scott for the amazing job you did presenting this in an easy, and concise manner. Wish you guys all the best!
Glad we could help, Thanks for watching!
Best trigger install tutorial. You guys really made it east, thanks!
Just picked up the ALG recoil spring for my Circle 11 1969 parts kit. Im pretty sure thats the OG spring from 69. Next is a KNS has piston. My shells are getting launched into the next zip code. 😂
Great video but complete and total understatement about how much of a PITA it is to compress the ALG recoil spring and get it back together, lol. Thanks for the video though, it was very helpful! Also, if anyone is in the same boat I was, I had a 1970 Izhmash parts kit build and the carrier was jumping the rails if charged too slowly...this recoil spring fixed the issue and it now cycles reliably even if you ride the bolt back too slowly.
No joke, a real pain in the a$$
Can't stress enough on being careful untying the hammer springs. Took one across my thumbnail and it was like smashing it with a real hammer!
+David Hodo Dude We know the feeling and it sux!!!
Yep, I been bitten with those nasty fangs as well. It do smart.
my recoil spring just pull spring bake and pull down on roll piece and slide it out to the side. just has a slot in it. id get rid of that find one easier to take spring off and on. the E clipsb never seen those on a ak those seem about the hardest pin retainers to usemine had original spring type got rid of that first thing went to the plate type
Your video is better than ALG. Thanks
Thank you
Thank you very much, gentlemen! I appreciate the guidance.
I heard you can use the cap from the cleaning kit or a 12 gauge shell to contain the spring instead of tying it. I haven't tried it yet,though. I just try to be careful,have been bit a few times though!
I think your on to something with the shot gun shell will have to give it a try.
Nice video guys! I have the ALG trigger , ALG Power Spring , Krebbs fcg retainer, and the Power Custom extended axis pins installed in my Arsenal slr107, what a nice rifle it is to shoot! (extended axis pins) 😎
Sounds like you got a wicked setup brother.
the grip is from yugo m70
Best alg trigger video, better then geiselle's one IMO. 👍
Thank you!!!
Great presentation and explanation.
Great video guys
Thank you
Prob should of shown how hard it was on tape for the spring. Hard as hell
I noticed one end of the recoil spring is longer than the other. Which way does it go?
My aktel mad aktul triggers from alg have 0 over travel what kind did you buy for $50?
The original Alg when it first came out.
Want to test a new new drop in ak trigger? Thank Tom
Was that a Maadi?
Lighting bow is the way to go....
Great video on the install. Very good close camera work. When I installed the ALG ak trigger with the high energy main spring with and without the auxiliary trigger spring the trigger would not reset while holding the trigger back. It would reset on its on if I let go of the trigger and charged the bolt. I reinstalled the stock braided spring and it functioned fine. I did not shoot the gun with the high energy spring installed. It seemed that the hammer was stuck under the hook of the disconnector. It instead of the hook on the trigger. You could ease the trigger foreword with the side of you trigger finger to let the trigger reset. This did this even after I lubed the indicated areas on the directions. Any thoughts or suggestions? I'm definitely pleased with the trigger and trigger pull. Just confused about the high energy mainspring. Thanks
I will look at ours this week and get back to you
I like the wood 10 times better
Great video , sweet gun but should've just added wood or hogue grip . lol .. putting ALG trigger in my vepr fm47-11 😉 this week as it's already been ordered to finish it off already added zoukuf folder stock and did all plastic od green , hogue grip , krink break , 3x prism red Dot on utg pro mount 👍👍😀😀 built like a tank
great video
+Michael X Thank you
I Care Guys Great Vid.
Thank you
Great tutorial, The weapon sucks though. Keep working on upgrades.
Agreed