These are going to be great as wing additions to one of the heavier tables. I always seem to have a part hanging off the edge that needs good support, but not enough to justify a huge table.
Love it Jason man I was watching you put the one leg on regularly without a square I don’t have that triple square one yet almost got one at fabtech but I’ve been using the fireball squares for about 5 years now and I was thinking the same as you probably man this would be a heck of a lot faster with a fireball square lol they are literally life savers and time savers and better yet your work is more accurate. Love the video and table 👍
You should design and print some half round TPU knee bumpers that attach to the recessed shelf frame. Just in case you accidentally slide forward too enthusiastically.
The nut should be on the bottom of the foot. If it is on the top, those tack welds are supporting the whole weight of the table and whatever is on it, and if you're hammering, all that force as well. Very likely that over time they will break loose if your welds aren't great. With the nuts on the bottom all the racks are doing is holding the nut from rotating when you're twisting the foot to level the table.
![[Carpenter's Nightmare] Asked to fix a DIY balcony deck, so the carpenter rebuilt it from scratch!](/img/n.gif)
This is the table I have been waiting for! Precise, but also within my small budget.
Same here! Also, I don't have a lot of space.
These are my favorite infomercials
This is almost exactly a design I drew in fusion and planned to sell. Glad to see someone is. I even used a similar leveling system
Such a brilliant, yet simple design.
The Bob Ross of table building…”this is your table, you build it anyway you want.”
This is a fantastic kit and design!
Awesome table! And thanks for sharing the assembly tips!👍
These are going to be great as wing additions to one of the heavier tables. I always seem to have a part hanging off the edge that needs good support, but not enough to justify a huge table.
Just got my mini (6") mega squares and I LOVE them.
This one ROCKS, JASON!👍👍
PROPER! ⭐️⭐️⭐️⭐️⭐️
You have great ideas. Love your content.
Love it Jason man I was watching you put the one leg on regularly without a square I don’t have that triple square one yet almost got one at fabtech but I’ve been using the fireball squares for about 5 years now and I was thinking the same as you probably man this would be a heck of a lot faster with a fireball square lol they are literally life savers and time savers and better yet your work is more accurate. Love the video and table 👍
You should design and print some half round TPU knee bumpers that attach to the recessed shelf frame. Just in case you accidentally slide forward too enthusiastically.
10:54 I didn't realize you'd removed the fasteners from the plate. I was briefly scared for your back!
I'm into it.
Awesome!👍
Dang sold out of the one with the kit100
OUTSTANDING ; o .....
So cool!!!
The nut should be on the bottom of the foot. If it is on the top, those tack welds are supporting the whole weight of the table and whatever is on it, and if you're hammering, all that force as well. Very likely that over time they will break loose if your welds aren't great. With the nuts on the bottom all the racks are doing is holding the nut from rotating when you're twisting the foot to level the table.
Nice.
do these ship to Canada? :D
Do the Dragon Wagon accessories fit this table as well?
whats the cleaning mixture ratio. thanks
what is that black welding pliers called ?
They appear to be CH Hanson brand locking c clamp, it doesn't appear they make them black anymore.
⭐🙂👍