This is perfect for me! I've had a bandsaw for years now and made a hundred crap bandsaw boxes.. I've been wanting to practice carving sculptures with my dremel tool and this is the perfect project! You even included a basset! I can make a figure of my baby booooy.. He passed away 2 months ago and this can be therapeutic for me. Thanks!
In the shop we tend to get comfortable to a point I thought I could cheat the inevitable until my hand came too close to the blade while cutting a piece of wood, then ouch ! that hurt. I’ve learned short cuts are not worth losing a finger or a hand around power tools. Thanks for the vid.
The template does not fit correctly on an American 2x4. I had to shrink down the template to 80% for it to fit. Since you put the measurements in mm, I am assuming you are not in the States. The thickness of the 2x4 here is 1-1/2" and the template requires 1-7/8"
These are adorable and will be so useful in learning band saw skills. I’ve learned it’s so much different than the scroll saw. Thank you! I’ve subscribed and look forward to more videos.
sweet nicely done. The bandsaw is my favorite tool and can do just about anything I need cut. From wood to acrylic and all in between. The only down side if you can call it that is the dam blade changes. uggggggg
Not to sound like a creep, but where do you live? I have a ton of scrap 2x4 and plan to make a bunch of these, if you live in the US I can probably send you one... Or, if you live near a makerspace or workshop that offers classes, you can try to make your own! It's fun. I plan to make a bunch as practice to make one that looks like my pup who recently passed away. (In my picture) I'm sure I'll be giving away a hundred squirrels and dogs! lol
Thanks! Well I guess the squirrel and the dog do have top views, since you need to cut the ears off the dog and the waist for the squirrel. For the deer thers not much you gain from cutting it from the top I think. :)
So, i can see that i commented on this video 2 years ago. Finaly last week i tryed to make this. I made the squarle and had not waht the video again.... So taping the sides were not in my mind and hade to frehand all and it wnt terible.... :P Got som left of oak still left so new try this weekend :D
Fantastic video, my question is how do you determine where to do the first cuts. I am trying to understand how to create these impressive structures from a block of wood...thanks
The templates dont appear to be on your site anymore? I just got a bandsaw for christmas and havent used one in years. Super excited to make my own little doggies like these! - Subscribed in the meantime ;)
I really enjoyed watching this. Your bandsaw skills are awesome. I have a very basic bandsaw with a wide blade at the moment, I'm still learning to use it mainly to cut out a rough shape and the rest I do with carving tools etc.
I started with a different reindeer and then tried to make a fox. First one was horrible but helped me trouble shoot. I've heard start with the simplest side. Then do the more complicated one.
Thanks for video, I purchased your templates, problem I'm having is that the template for the deer is larger than a conventional 2x4, the dimensions on the downloads, I believe are in millimeters, and the thickness on the drawing is 48mm, when a conventional 2x4 is only 38mm, could you please let me know if I need to print in a smaller scale? Thanks Again
![CAMPปลิ้น | EP.82[1/2] แก๊ง 3 สาวเพื่อนซี้บุก CAMPปลิ้นครั้งนี้ห้ามเสียอาการ](http://i.ytimg.com/vi/_6WUjXHe1TM/mqdefault.jpg)
Darn.... Now i need to buy a band saw...
I vote fore the DOG! all day :D
Love this!
Eric Andresen you won’t regret it
just bought a 1/8" blade for my saw and cannot wait to get started. Love the deer but all are great, thank you for the instruction
This is perfect for me! I've had a bandsaw for years now and made a hundred crap bandsaw boxes.. I've been wanting to practice carving sculptures with my dremel tool and this is the perfect project! You even included a basset! I can make a figure of my baby booooy..
He passed away 2 months ago and this can be therapeutic for me.
Thanks!
Was it the therapy you needed?
Where do I get the patterns.
Great video, just a scary scene watching those cuts on the table saw though...
Was thinking the same
it's purple so you know when it's dry and what you smeared it on
aaah ok
Love the Doggy. I am thinking of making one, but what do I need to feed it on? Guessing a sawdust diet.
In the shop we tend to get comfortable to a point I thought I could cheat the inevitable until my hand came too close to the blade while cutting a piece of wood, then ouch ! that hurt. I’ve learned short cuts are not worth losing a finger or a hand around power tools. Thanks for the vid.
The template does not fit correctly on an American 2x4. I had to shrink down the template to 80% for it to fit. Since you put the measurements in mm, I am assuming you are not in the States. The thickness of the 2x4 here is 1-1/2" and the template requires 1-7/8"
These are adorable and will be so useful in learning band saw skills. I’ve learned it’s so much different than the scroll saw. Thank you! I’ve subscribed and look forward to more videos.
"I made half an arm _using only a bandsaw_ "
Looks really great. I think with some more sanding and oiling it up, you would get a really beautiful finish on those.
This is a Great Video. I am a Sri Lankan, how can I download this type of printable template?
Just found your channel, great! You have a new subscriber! I like to make toys etc myself! These animals are great!
@Tyler SpindlerThanks!
Thanks! I would like to have a copy of the patterns. How do I get them?
sweet nicely done. The bandsaw is my favorite tool and can do just about anything I need cut. From wood to acrylic and all in between. The only down side if you can call it that is the dam blade changes. uggggggg
What type of wood are you using?
10:07 Reminds me of Jar Jar Binks.
omg can I have them? Squirel is my favourite :P
🐿🤓
Not to sound like a creep, but where do you live? I have a ton of scrap 2x4 and plan to make a bunch of these, if you live in the US I can probably send you one...
Or, if you live near a makerspace or workshop that offers classes, you can try to make your own! It's fun.
I plan to make a bunch as practice to make one that looks like my pup who recently passed away. (In my picture) I'm sure I'll be giving away a hundred squirrels and dogs! lol
Awesome
Salute from Turkey 🖐️
Those are cool! Enjoyed the video! And the dog is my favorite.
Thanks man :) i really like the dog to 🐕
So cute! I like the deer the best.
Where can I have the figure in peper?
I like how he put on the same music that Mark Rober uses a lot while making the squirrel! :)
You had me thinking it would be a classic Mark Rober Blue Wednesday track... Not familiar with the track playing and I Mark Rober all day erryday =P
Where do you get the templates from?
how do you make your paper tenplate
awesome project, im curious to see what happens if you would add a top view to these drawings.
Thanks! Well I guess the squirrel and the dog do have top views, since you need to cut the ears off the dog and the waist for the squirrel. For the deer thers not much you gain from cutting it from the top I think. :)
I purchased the template and it went to a zip file but won’t open. Any advice?
Were you able to get the files?
How do you get the templates?
template which was made can you guide how to make it
patter should be front view and side view or side view and back view
The template? Where can I have
So, i can see that i commented on this video 2 years ago. Finaly last week i tryed to make this. I made the squarle and had not waht the video again....
So taping the sides were not in my mind and hade to frehand all and it wnt terible.... :P
Got som left of oak still left so new try this weekend :D
Your webshop doesn't indicate a currency ...I assume USD ?
The gluestick is purple because a white/clear gluestick is a LOT harder to see on white paper....
I would NEVER be able to do this with my cheap little bandsaw. 😢 I’d really like to though. Bummer.
HOW MUCH BANDSAW COST? EXHIBIT YOUR INTELLIGENCE USING MANUAL TOOLS.
Love the deer. It's awesome. Thanks for sharing your video.
Fantastic video, my question is how do you determine where to do the first cuts. I am trying to understand how to create these impressive structures from a block of wood...thanks
Thank you for such a fantastic presentation. My daughter and I will be putting these templates into action!
Can I do these on a scroll saw?
Thank you so much for your tutorial!! I like me that Jobs. I hope to have a similar machine 😁😁. Congratulacions!!
Awesome work. What is the dimensions your saw blade? Or type?
The templates dont appear to be on your site anymore? I just got a bandsaw for christmas and havent used one in years. Super excited to make my own little doggies like these! - Subscribed in the meantime ;)
The deer is my favorite. I'm just learning, so your video helped me a lot.
I would say the person you talking about Rain Deer is Alex Snodgrass , this guy will teach anyone on bandsaw cutting
Very clever Alex. I bought your animals. Just waiting for them to arrive.
great video
I would love to have a pattern of a buffalo. let me know if it can be done and how much
thanks
Did you put the top guide so high for camera or is it for better flexibility with the blade for the curves?
I'm sure you can find awesome woodworking plans on woodprix
good morning, i would like to know how i can get the copies of the drawings for clipping?
Were can you get template
Great video! I enjoyed your presentation and explanation, thanks for sharing 👍
I getting my first band saw for Christmas. I talked her into letting me use it now to make some decorations.
what cutting saw do you use for cutting? 6mm 4mm ?
Im not finding the templates on your site, are they still available?
BEFORE YOU START BOSSING YOURSELF PROVIDE THE COST OF YOUR TOOLS TO THE VIEWERS.
Bravo majstore odličan rad. Pozdrav iz Srbije.
"...using only a bandsaw" ... 1:45 use table saw 🙄😀
Ali Salih 🤫😅
Great projects. I have always wanted to make some of these
Buenas felicitaciones maestro donde puedo descargar los planos o moldes que tipo de madera y de cuántos centímetros se usa gracias
Great video, do you have a link for the templates?
No chisels, no dremel tool, just a bandsaw. Amazingly simple and useful for other projects!
2:10
the glue dries clear
the purple is just an indicator to tell you that it's still wet
👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻
The. Dog is the best
Can I do this on my bench top bandsaw I just bought ?
I really enjoyed watching this. Your bandsaw skills are awesome. I have a very basic bandsaw with a wide blade at the moment, I'm still learning to use it mainly to cut out a rough shape and the rest I do with carving tools etc.
@1:49.....You're gonna lose a fingertip my guy....
Hi sir, how can I download animal patterns?
Show de bola
Bonjour video très sympa peu tu me dire ou je trouve les animals pattern thank you
Ciao...mi sono appena iscritto al canale....👍👍👍
Just found this channel. it looks good so far.
Deer!
A voice-over would have improved this video.
Where can I download templates?
I remember back in the 70s watching Shopsmith demonstrations where the guy would do the same, I was always amazed.
Çvcçx
Could I do these on a scroll saw?
th-cam.com/video/x58-rOOw54I/w-d-xo.html
Where is the link to download the templates?
estupendo gracias por los videos apenas comienso y veo marabillas 2020
Can you please send me the link for the plans. Thank you great video.
Regards Steve
The link is in the description you just have to find the plans in his website
I tried this with a hand saw, boy was I dissapointed
Great work and a 1/16" blade may make it even easier.
Going into my joiners shop and have a go.
Great, now i want a band saw :/ :)
asztapaszta9 haha! As good of an excuse as any i guess :P although you can probably make the deer just fine with a coping saw ;)
Hi my name is Rene and I like the wooden reindeer
Pretty 😎 cool thanks
Hi Alexandre! If you don't mind, I've a question: what kind of wood are you using to make them?
Sprucewood as you can see
Great video and an awesome idea using the templates. Thanks
Finally, more than a reindeer!
super to zrobiłeś, bardzo ładnie
Where can I get the templates???
Puoi mandare i disegni.grazie
The dog is my favorite
I got the templates thank you
Can we use zig saw like this?
i used to make those deers in highschool, i am 44 now.
Don't worry; I'm sure you'll graduate soon.
Great job, well-done. Is there a rule of which side to start with? and how to create a template for something new? thanks alot.
I started with a different reindeer and then tried to make a fox. First one was horrible but helped me trouble shoot. I've heard start with the simplest side. Then do the more complicated one.
The deer and the dog 😊
Thanks for video, I purchased your templates, problem I'm having is that the template for the deer is larger than a conventional 2x4, the dimensions on the downloads, I believe are in millimeters, and the thickness on the drawing is 48mm, when a conventional 2x4 is only 38mm, could you please let me know if I need to print in a smaller scale?
Thanks Again
2x4 is 2inches / 50,8mm) by 4icnhes / 101.6mm, so if your 2x4s measures 38mm thickness it is not really conventional ;)
@@CorporalClegg77 Elden is correct… in Canada, a conventional 2x4 is actually 1 1/2” ( 38.1 mm) x 3 1/2” ( 88.9 mm) !!!
Marv Janzen