It’s really not that difficult. They sell the main board and power supply board online. Grab a Phillips head screwdriver, take off the back, identify what needs to be replaced and replace it. Same thing as replacing a PC component.
I am learning to repair tvs and other electronics, and I'm working on a Hisense 75 inch. I'd like to thank you, this video was incredibly helpful! Keep up the great work friend.
Mine just recently did this but my red light doesn't flash 3, 4, or 8 times like everyone says. It stays solid red but blinks once when I push the power on button on the tv and the remote( but it doesn't turn on) I'm confused as to what may be causing it
My tv is a 43 inch hisense and is over 2 years old the standby light is on. I thought I turned the tv off by accident by bumping the remote. Then I tried to cut it back on and it just blinks like 6 times and stays red. Can some one help
I have a Hisense roku tv that blinks red three times and won’t turn on. I was told I should replace the power board. Where do you typically get your replacement parts from?
Zero voltage at the backlight connector. However, with voltage tester red lead to the connector and negative lead wire to the chassis ground there is 105 vdc. Unit is high sense 32 “. Can you help, thanks.
I have a 65 Hisense. It has red light blinking for many times and I can't find any bad capicitor or resistors in the power board. And the 12 volt voltage isn't fixed It goes up and down. Please help me I'm a repairman
I have the blinking stand by light on 40 inch 40H3E Hisense (will blink 3 times then stop). No picture. I can see it (picture) with a flashlight to the screen. Is this a bad LED backlight strip?
Hi francis sahuku, this is happening due to incorrect voltage supply from psu or main board. Please check the outgoing voltage supply and if required replace or repair it. Thanks for your keep in touch with our channel and share this helpful video & channel with your friends and social media for helping others.
If you still have the warranty call them to send a tech. If not and you can’t turn the TV on but the standby light is solid red, it’s probably the power supply board. Find the part online (it’s usually $160 or so) and un-screw the back and replace the defective part. I am having the same problem on my 65H6570F. I’m probably going to stick with LG in the future though.
I followed your direction. Red light is on when pushed it blinks 6 or 7 times. Replaced power supply board with 2 new ps boards and led doesnt turn on at all with one and blinks the 6 times. Switched to original ps and changed main board with 2 new ones and light stays on then blinks 6-7 times. Any help would be awesome.
hi...my hisense android tv wont turn on....i already check the PSU board....some of the parts got current when check it with multimeter....is that power board problem>???
Dear sir, thanks for reaching out here. There are various reasons to not turning on hisense tv. Kindly double check the mainboard and psu board. Also check power cable and outlet. Then you decide to replace the faulty board. Any difficulties please inform me. I will be happy to help you. If this information is helpful please like and share the video with your friends and subscribe to the channel for next tech video.
Where are you touching the negative lead when measuring the standby voltage? I used one of the screws that hold the board in place, and I'm measuring 25 volts!
I have a Hisense 65R6E. Turn it off last night. When I went to turn it ON this morning, nothing. The RED light is on but I cant get it to show a picture. Have unplugged the unit many times, tried the power switch on the unit as well as the remote but still nothing. Purchase date 4/4/2019 should I invest to repair or replace?
Hi curt riekhof, thanks for reaching out to me. Your tv won’t turn on. Kindly check your tv remote batteries. Hopefully the problem is from remote. Replace the batteries with new 🔋 . If persist the same problem then reply me. We will be happy to advice you again. If this information is helpful please hit the like and subscribe button. By the same reason please share this video with your friends and social media to help your friends.
Right now your tv is not turning on.?? You already applied unplugging method but no result. So in that position you required to send the tv to service center or repair the main board. If you have enough experience then try at home. And any difficulties please feel free to inform me. If the information is helpful please hit the like and subscribe button. And share this helpful video with your friends and social media to help your friends.
Same problem with my Hisense 60R5800E which I purchased in summer of 2019. I believe it's a Walmart exclusive model, but same line/family like your TV (...R6E). RED power light in ON solid but the TV won't turn on regardless what I do to it. According to forums and repair websites, most likely culprit is the mainboard. Luckily, I purchased the extended warranty so they issued a full refund and told me to keep/dispose of TV. Good thing, Ebay is full of replacement parts for Hisense TVs. Many parts are working pulls from brand new TVs with cracked screens. Mainboard for my particular model is $40 with free shipping. Power supply boards are pretty much in the same range. Since I am pretty good with electronics, I will open up the TV and test the power supply with my voltmeter, just like the video suggests. I figure it's a huge waste throwing away perfectly good TV because of 1 or 2 crappy parts. Shame on you Hisense. I'll keep you posted on my repair, if you are interested. P.S. You've got to love Ebay for all these odd ball parts.
Hopefully you still replying to this thread. So i have multiple questions about two TVs. The first is my Hisense 43 inch when you turn it on the red light flashes once then nothing. The light stays on red, doesn't flash or anything. Everything seems to be ok on the inside so my question. Is there anything other then bad board that will make the light flash red a single time then stay solid red? While the TV stays black i don't even see the backlight turn on.
Hi i have a 2018 55inch Hisense tv. It suddenly stopped working and went to a black screen with no sound. Ive tried all the re-sets and nothing. But when i hold a flashlight up to it i can see the logo flashing. I think one of my circuit boards went out but not sure which one? And yes, i have checked the batteries in the remote and still nothing.
I have a roku hisense 58 inch. And just yesterday it started to turn on and off by it self. It repeatedly does it. And once it turns on, I try pressing a button on the controller and in a second the tv turns right back off. Is it the power board? I really have no knowledge of replacing a powerboard or anything.
I have a Hisense 50CU6000 with no pic or sound . . . when i push the power button the red standby light blinks 5 times then goes out . . . any advice would be appreciated . . . Thanks
Do you have any Idea how to fix a Hisense LED tech TV Model 392N2174. It's stuck in red light. when i plug it it turns blue then red. remotes and power on button on tv does not work. Hoping for your help. Thanks
Hi Robert please check your remote is 👌 or not. If you’r remote is ok then it is happening due to incorrect voltage support from the power supply board or main board. Please need to find the faulty capacitor on the psu board. And replace the faulty board. Or repair the capacitor. Any difficulties please let us inform and subscribe the channel. Please share this helpful video with your friends and social media for helping others.
My Hisense 65# tv has the red light on, but when I press the ON button the backlight turns on the red light blinks 4 times but no picture, do you know what is the problem is?
During the thunderstorm make sure to unplug anything of value. My mother in law had two tvs destroyed because of thunderstorms. My tvs are about $1500+ a piece so I unplug them when I not using them
Hi 👋 friend, thanks a lot for your great advice. You are the best. Any troubleshooting support needs please let us inform and subscribe the channel. Please share this helpful video with your friends and social media for helping others.
got a hisense TV .. Thats has black screen.. But when shining light to screen! . You can see the HISENSE ROKU ... so its just figuring out ..how to proceed with seeing the LOGO
I have a Hisense 65AE7000FTUK and it's sitting in standby with a solid red light but when i press and hold the power button it it flashes. Looking at the video at the 5.53 mark it has Problem & Tip: 01 saying it's the power board. This is an oldish video, but is it the same concept with the newish tv's? I don't have a voltage meter reader and before I go buying a power board I'd like to make sure that it will definitely be the problem, or if anyone has had the same problem with maybe the same TV and replaced the power board successfully and that was the problem. Cheers.
My hisense tv turns off, its raining that time when the thunder strikes. We try to unplug then plug it again to try if it will turn on, but nothing at all... How can I fix it? Pls help.
My hisense 32 smart tv has the red indicator on but no picture and sound i try ur advice to unplugged and press the main button for 30 seconds and plug it again but still the same...kindly help me
I just bought a Hisense 32 inches tv,I tried to put it on on getting home,but it's Only showing AV and will go off leaving the red light in the power button.i insert a flash drive but it was saying no sim.please what should I do?
The problem I'm not happy with my house and Roku TV is that if the red light blinks and the screen Roku TV and then blink off and then the lighter blink and then do the same thing display hives and TV then blink off how do I fix this please
I got my 50inch smart hisense tv motherboard replacement after it was burnt due to excessive power, now I can't connect to internet, wifi screen mirror. Please assist
Second question is about my Dynex 55 inch and it's a bit complicating. So the TV works.... Sometimes, what happens is it will either just work until it shuts off or goes into sleep or it will go to problem 1 or 2. Which is this problem 1 is where my TV goes completely distorted almost like it is overheating the picture basically scrambles or it will just go to the backlighting with no sound which is problem 2. So when either problem occurs i have to unplug the TV for several hours if not and entire day then turn it on the next and hope for the best. But when it's on it starts good the whole time. Until someone thinks their doing me a favor by shutting it off or i get the"oh its running good and had been on for almost a week i think it's ok to shut it off". Please help with either TV please i have already showed others to type channel. Thanks 👍👍
My hisense h50a6200 .... I have followed ur advice video’s .. my tv standby red button comes on as soon as I press it the telly becomes dead I have to unplug it and try again .. same results over n over ... I have changed the psu board and also the main board the t con board and lastly the module an start button... but all to no avail ... I am gutted and don’t no were to go nxt no one seems to have any idea or good advice... can someone please please please help me ...? Thank you all x
Have Hisense 40H4030 F. Plug it in, red power comes on/dims, flashes goes out then repeats over and over. Nothing on screen. Replaced main board same crap. No idea what it could be. Is there another board under the chassis below the main board??
Before replace need to check voltage supply of main board. However please check power supply output voltage supply. You know that various reasons against one single problem. However any difficulties please let us inform and subscribe the channel. Thanks for sharing this helpful video with your friends and social media for helping others.
on the power board says output voltage are 2 (12v and 16v). The 12v output is ok but the 16v is showing 21v on the voltimeter, will it cause any damage to the logic board at that voltage?. Also the red light is steady and the tv wont switch on.
What’s the name of the first song you played for hisense??!! Also,, I see hisense have a serious problem with their power boards and main boards,, I’m having the same problem also,, taking it to a repair shop cuz it’s too complicated for me..
I have a Hisense 65” android smart tv. When I turn it on it goes to the logo then immediately turns back off. I replaced power board but still same problem
Hi christain ciempola, its not power board issues. Two reasons behind the problem. 1. Software update failure 2. Main board problem So please check before any replacement. Any difficulties please let me know. Please subscribe the channel, like and share this video with your friends.
Dear I have one problem that I can not solve, and it concerns Hisense tv? I have a model Hisense tv H43A6100 4K. I don't know where and to whom I could turn for help, because I also turned to Hisense.rs ... and their service and some other Hisense addresses around the world and NO ONE helped me !!! My problem is "parental control" ... Recently I use Supernova cable and instead of the receiver I use the C + module card. I have a full package and I have a code from the provider with which "should" ALL channels be opened ?! That's where the problem arises, Hisense or does my TV not allow it ??? I have tried the card in several other TVs and with the code from the provider all the channels are open unlike my TV ?! I tried tuning, I turned off that famous parental control on TV and NOTHING ... opens channels? I reset the TV to factory settings and who knows what I haven't tried and it doesn't work, so that's ... Is there a way to solve it or not?
I have a hisense tv, it switches off after the logo is displayed, the screen is basically blank, when I remove the Chimei-Innolux LED backlight driver board, the blue light stays on but no picture obviously. I tested the other circuit boards using tester and all seems okay.
Please disconnect all external devices and power cables from electric source. Wait 5 minutes and then try. If not opening that’s mean hardware problem. Please need to check power supply board voltage supply and main board. Any difficulties please let us inform and subscribe the channel. Please share this helpful video with your friends and social media for helping others
I have a highsense 55" led tv that just blinks red 1 long 1 short continuously? I replaced the power board and the problem is the same what now any suggestions?
Same here. New pwr board no fix. I guess next is Main board? Two of the led backlights were out so I soldered two new ones on and tested them and they worked so I know it's not the back light.
Hi friend, thanks for reaching out. If the method doesn’t work then you required to repair the hardware of tv. You know this is happening due to incorrect voltage supply from main board. So please send the tv to service center or repair at home. Any troubleshooting support needs please feel free to ask me by reply. If this is helpful please hit the like button and subscribe to the channel. Kindly share this video with your friends and social media to help others.
Just replaced my Hisense today. Bought it brand new less than 3 years ago. First all 4 HDMI ports simultaneously stopped working, now the tv won’t even turn on. Piece of S**t. NEVER buying this brand again.
![ทางเดินชีวิต - ธีเดช ทองอภิชาติ x อ.ไข่ มาลีฮวนน่า [Official MV]](http://i.ytimg.com/vi/1f3wcG16dd4/mqdefault.jpg)
Man, I was just looking for a simple solution, this is high level stuff. I can't do this 😔
It’s really not that difficult. They sell the main board and power supply board online. Grab a Phillips head screwdriver, take off the back, identify what needs to be replaced and replace it. Same thing as replacing a PC component.
Lol i was hoping to push the power button 10 times or something like that
@@8LARAIDER4j
@@8LARAIDER4 w
Agreed
I am learning to repair tvs and other electronics, and I'm working on a Hisense 75 inch. I'd like to thank you, this video was incredibly helpful! Keep up the great work friend.
Well you have mentioned to replace every part then why not replace the entire tv itself???
Mine just recently did this but my red light doesn't flash 3, 4, or 8 times like everyone says. It stays solid red but blinks once when I push the power on button on the tv and the remote( but it doesn't turn on) I'm confused as to what may be causing it
My tv is a 43 inch hisense and is over 2 years old the standby light is on. I thought I turned the tv off by accident by bumping the remote. Then I tried to cut it back on and it just blinks like 6 times and stays red. Can some one help
I have a Hisense roku tv that blinks red three times and won’t turn on. I was told I should replace the power board. Where do you typically get your replacement parts from?
So nice for Us technicians to understand keep on with that technology
Zero voltage at the backlight connector. However, with voltage tester red lead to the connector and negative lead wire to the chassis ground there is 105 vdc. Unit is high sense 32 “. Can you help, thanks.
any update?
I have a 65 Hisense. It has red light blinking for many times and I can't find any bad capicitor or resistors in the power board. And the 12 volt voltage isn't fixed It goes up and down.
Please help me
I'm a repairman
That is great! ! This information helps me to fix t v, and get more knowledge of troubleshooting
I have the blinking stand by light on 40 inch 40H3E Hisense (will blink 3 times then stop). No picture. I can see it (picture) with a flashlight to the screen. Is this a bad LED backlight strip?
Where do you get parts? From Hisense website or somewhere else?
what could be the problem on the power supply board because my tv has no picture no sound only the front and stuck blue light
Hi francis sahuku, this is happening due to incorrect voltage supply from psu or main board. Please check the outgoing voltage supply and if required replace or repair it.
Thanks for your keep in touch with our channel and share this helpful video & channel with your friends and social media for helping others.
@@FIXNETFLIX so how much correct voltage should I expect from the outgoing power supply
My tv is brand new the second day it started doing this.
Edit. Now I will say they brought me another and it’s worked fine since
I have a HisenseN49M35P tv and the red light is on solid red. How do I check what is wrong?
I have similar problem. It seems Hisense tv are of inferior quality. How can this be fixed?
If you still have the warranty call them to send a tech. If not and you can’t turn the TV on but the standby light is solid red, it’s probably the power supply board. Find the part online (it’s usually $160 or so) and un-screw the back and replace the defective part.
I am having the same problem on my 65H6570F. I’m probably going to stick with LG in the future though.
Great interesting and very informative video that people can understand .... I can now try and repair my tv 📺 thx 🙏
🤣🤣🤣
Exactly like wtf!!!
I have an hisense 50" tv black screen and audio. But the power light is on.
Same , these tvs are trash
same it won’t turn on can someone help
Tengo una con el mismo problem
I followed your direction. Red light is on when pushed it blinks 6 or 7 times. Replaced power supply board with 2 new ps boards and led doesnt turn on at all with one and blinks the 6 times. Switched to original ps and changed main board with 2 new ones and light stays on then blinks 6-7 times. Any help would be awesome.
Your backlight
hi...my hisense android tv wont turn on....i already check the PSU board....some of the parts got current when check it with multimeter....is that power board problem>???
Dear sir, thanks for reaching out here. There are various reasons to not turning on hisense tv. Kindly double check the mainboard and psu board. Also check power cable and outlet. Then you decide to replace the faulty board.
Any difficulties please inform me. I will be happy to help you.
If this information is helpful please like and share the video with your friends and subscribe to the channel for next tech video.
Where are you touching the negative lead when measuring the standby voltage? I used one of the screws that hold the board in place, and I'm measuring 25 volts!
I have a Hisense 65R6E. Turn it off last night. When I went to turn it ON this morning, nothing. The RED light is on but I cant get it to show a picture. Have unplugged the unit many times, tried the power switch on the unit as well as the remote but still nothing. Purchase date 4/4/2019 should I invest to repair or replace?
Hi curt riekhof, thanks for reaching out to me. Your tv won’t turn on. Kindly check your tv remote batteries.
Hopefully the problem is from remote.
Replace the batteries with new 🔋 .
If persist the same problem then reply me. We will be happy to advice you again.
If this information is helpful please hit the like and subscribe button.
By the same reason please share this video with your friends and social media to help your friends.
@@FIXNETFLIX LOL, yes that was the 1st thing I checked then tried to turn the set on by the switch on the the set.
Right now your tv is not turning on.??
You already applied unplugging method but no result. So in that position you required to send the tv to service center or repair the main board.
If you have enough experience then try at home. And any difficulties please feel free to inform me.
If the information is helpful please hit the like and subscribe button. And share this helpful video with your friends and social media to help your friends.
Same problem with my Hisense 60R5800E which I purchased in summer of 2019. I believe it's a Walmart exclusive model, but same line/family like your TV (...R6E). RED power light in ON solid but the TV won't turn on regardless what I do to it.
According to forums and repair websites, most likely culprit is the mainboard. Luckily, I purchased the extended warranty so they issued a full refund and told me to keep/dispose of TV.
Good thing, Ebay is full of replacement parts for Hisense TVs. Many parts are working pulls from brand new TVs with cracked screens. Mainboard for my particular model is $40 with free shipping. Power supply boards are pretty much in the same range.
Since I am pretty good with electronics, I will open up the TV and test the power supply with my voltmeter, just like the video suggests. I figure it's a huge waste throwing away perfectly good TV because of 1 or 2 crappy parts. Shame on you Hisense.
I'll keep you posted on my repair, if you are interested.
P.S. You've got to love Ebay for all these odd ball parts.
Hopefully you still replying to this thread. So i have multiple questions about two TVs. The first is my Hisense 43 inch when you turn it on the red light flashes once then nothing. The light stays on red, doesn't flash or anything. Everything seems to be ok on the inside so my question. Is there anything other then bad board that will make the light flash red a single time then stay solid red? While the TV stays black i don't even see the backlight turn on.
Hi i have a 2018 55inch Hisense tv. It suddenly stopped working and went to a black screen with no sound. Ive tried all the re-sets and nothing. But when i hold a flashlight up to it i can see the logo flashing. I think one of my circuit boards went out but not sure which one? And yes, i have checked the batteries in the remote and still nothing.
I keep seeing it's the "backlight" but I'm not a technician. Good luck with that.
I have a roku hisense 58 inch. And just yesterday it started to turn on and off by it self. It repeatedly does it. And once it turns on, I try pressing a button on the controller and in a second the tv turns right back off. Is it the power board? I really have no knowledge of replacing a powerboard or anything.
I have a Hisense 50CU6000 with no pic or sound . . . when i push the power button the red standby light blinks 5 times then goes out . . . any advice would be appreciated . . . Thanks
Same problem here!
When I prees the power button on the remote power Led start blinking without switch on the Hisense 55Tv.
What will be the cause for that please.
I change the power board and main board , the standby light on no picture no sound. (hisense 58h6550e) Can you please help out .thanks
Thank you for this video, very helpful
How to bypass protection of inverter ic LX27901 on board RSAG7.820.7238?. It seems One or two backlight leds are bad. thank you.
Do you have any Idea how to fix a Hisense LED tech TV Model 392N2174. It's stuck in red light. when i plug it it turns blue then red. remotes and power on button on tv does not work. Hoping for your help. Thanks
Hi Robert please check your remote is 👌 or not.
If you’r remote is ok then it is happening due to incorrect voltage support from the power supply board or main board.
Please need to find the faulty capacitor on the psu board.
And replace the faulty board. Or repair the capacitor.
Any difficulties please let us inform and subscribe the channel.
Please share this helpful video with your friends and social media for helping others.
Thanks this very useful to me
Hi I have a hisense 24 inch TV
Back key button set is overheats that Sid of screen white help to fix ..
My Hisense 65# tv has the red light on, but when I press the ON button the backlight turns on the red light blinks 4 times but no picture, do you know what is the problem is?
During the thunderstorm make sure to unplug anything of value. My mother in law had two tvs destroyed because of thunderstorms. My tvs are about $1500+ a piece so I unplug them when I not using them
Hi 👋 friend, thanks a lot for your great advice.
You are the best.
Any troubleshooting support needs please let us inform and subscribe the channel.
Please share this helpful video with your friends and social media for helping others.
got a hisense TV .. Thats has black screen.. But when shining light to screen! . You can see the HISENSE ROKU ... so its just figuring out ..how to proceed with seeing the LOGO
I have a Hisense 65AE7000FTUK and it's sitting in standby with a solid red light but when i press and hold the power button it it flashes. Looking at the video at the 5.53 mark it has Problem & Tip: 01 saying it's the power board. This is an oldish video, but is it the same concept with the newish tv's? I don't have a voltage meter reader and before I go buying a power board I'd like to make sure that it will definitely be the problem, or if anyone has had the same problem with maybe the same TV and replaced the power board successfully and that was the problem. Cheers.
My hisense tv turns off, its raining that time when the thunder strikes. We try to unplug then plug it again to try if it will turn on, but nothing at all... How can I fix it? Pls help.
same problem. what you did you do?
check the fuse on the power board
My hisense 32 smart tv has the red indicator on but no picture and sound i try ur advice to unplugged and press the main button for 30 seconds and plug it again but still the same...kindly help me
Is it possible to replace power and main board with a newer model board. Model is out dated and no spares available
I have 40 hisense replaced board and tv does the amething! Red light stays on but no picture oe sound
I just bought a Hisense 32 inches tv,I tried to put it on on getting home,but it's Only showing AV and will go off leaving the red light in the power button.i insert a flash drive but it was saying no sim.please what should I do?
MODEL: LEDN40D33P lighting stand by light only no turning on it has over disturbed me help please
The problem I'm not happy with my house and Roku TV is that if the red light blinks and the screen Roku TV and then blink off and then the lighter blink and then do the same thing display hives and TV then blink off how do I fix this please
My hisense tech tv 50" blue led light keeps blinking. No picture just black. Dont know how to fix it. Please help!
I got my 50inch smart hisense tv motherboard replacement after it was burnt due to excessive power, now I can't connect to internet, wifi screen mirror.
Please assist
TV hisense been checked nothing wrong with mother board TV light goes on and blue light back screen but no picture
@FixNetflix my tv doesn’t turn on with blue and right led blinking. Can you help?
Man our tv has red light on and if you press the power it will show the hisense but blured then it will turn off again may i ask what is the problem
hi ive got hisense led tv n24km 300m problem light is on bt cant turn on and its got a funny sound on speakers (krkrkrkrkr)plz help
Second question is about my Dynex 55 inch and it's a bit complicating. So the TV works.... Sometimes, what happens is it will either just work until it shuts off or goes into sleep or it will go to problem 1 or 2. Which is this problem 1 is where my TV goes completely distorted almost like it is overheating the picture basically scrambles or it will just go to the backlighting with no sound which is problem 2. So when either problem occurs i have to unplug the TV for several hours if not and entire day then turn it on the next and hope for the best. But when it's on it starts good the whole time. Until someone thinks their doing me a favor by shutting it off or i get the"oh its running good and had been on for almost a week i think it's ok to shut it off". Please help with either TV please i have already showed others to type channel. Thanks 👍👍
Hi i have a 75 inch hisense tv. It wont turn on doesnt have the red light where the power button is..what could be wrong. Thank you in advance
My TV has solid red light for approximately 6 seconds then blinks blue for 1 second and back to red.
What could be the problem.
My hisense h50a6200 .... I have followed ur advice video’s .. my tv standby red button comes on as soon as I press it the telly becomes dead I have to unplug it and try again .. same results over n over ... I have changed the psu board and also the main board the t con board and lastly the module an start button... but all to no avail ... I am gutted and don’t no were to go nxt no one seems to have any idea or good advice... can someone please please please help me ...? Thank you all x
Better if you buy new tv.
Already you invested more for repairing this.
Have Hisense 40H4030 F. Plug it in, red power comes on/dims, flashes goes out then repeats over and over. Nothing on screen. Replaced main board same crap. No idea what it could be. Is there another board under the chassis below the main board??
Before replace need to check voltage supply of main board. However please check power supply output voltage supply. You know that various reasons against one single problem.
However any difficulties please let us inform and subscribe the channel. Thanks for sharing this helpful video with your friends and social media for helping others.
Same issue here, how did you fixed it?
@@sergezaragoza5894 Bought a new TV. Tried my best, thought the new main board would do it, but nope. Got frustrated threw it in the trash.
@@markginsel4238 Bad IC chip on power board. Low voltage side. Best to buy new power board.
@@DavidA-411 where from?
Sir hisense TV me same problem TV is not starting remot is working but tv is hanging . After some time tv is starting what's problem
I'm just gonna trash the tv and get another one. Wow!!!
May o know the pin number for standby voltage?
on the power board says output voltage are 2 (12v and 16v). The 12v output is ok but the 16v is showing 21v on the voltimeter, will it cause any damage to the logic board at that voltage?. Also the red light is steady and the tv wont switch on.
Did you ever find the answer to this question? I have the same problem and looking for the answer.
My hisense TV is flashing red and blue light but doesn't wana turn on Wt might b d problem
What’s the name of the first song you played for hisense??!! Also,, I see hisense have a serious problem with their power boards and main boards,, I’m having the same problem also,, taking it to a repair shop cuz it’s too complicated for me..
Where is the power output on a 75inch hisense roku tv?
I have two up now still bulling me seriously need more help
So what we gotta rebuild our own fucking tv ? Smfh
Mine lasted 1yr🥴
I have a Hisense 65” android smart tv. When I turn it on it goes to the logo then immediately turns back off. I replaced power board but still same problem
Hi christain ciempola, its not power board issues.
Two reasons behind the problem.
1. Software update failure
2. Main board problem
So please check before any replacement.
Any difficulties please let me know.
Please subscribe the channel, like and share this video with your friends.
Hi my tv doing the same thing my daughter say the light is orange instead of red and when I turn on it go to logo then back off
Dear I have one problem that I can not solve, and it concerns Hisense tv? I have a model Hisense tv H43A6100 4K. I don't know where and to whom I could turn for help, because I also turned to Hisense.rs ... and their service and some other Hisense addresses around the world and NO ONE helped me !!! My problem is "parental control" ... Recently I use Supernova cable and instead of the receiver I use the C + module card. I have a full package and I have a code from the provider with which "should" ALL channels be opened ?! That's where the problem arises, Hisense or does my TV not allow it ??? I have tried the card in several other TVs and with the code from the provider all the channels are open unlike my TV ?! I tried tuning, I turned off that famous parental control on TV and NOTHING ... opens channels? I reset the TV to factory settings and who knows what I haven't tried and it doesn't work, so that's ... Is there a way to solve it or not?
The red blinking light is only blinking. TV turns on. How can I get the red light to go off?
Ridiculous! 📺 Remote channel buttons not working!!! Help!
I have a hisense tv, it switches off after the logo is displayed, the screen is basically blank, when I remove the Chimei-Innolux LED backlight driver board, the blue light stays on but no picture obviously. I tested the other circuit boards using tester and all seems okay.
Probably an LED is out
My is westend he problem I on tv few second automatically shut down solver solution please
Please disconnect all external devices and power cables from electric source. Wait 5 minutes and then try. If not opening that’s mean hardware problem.
Please need to check power supply board voltage supply and main board.
Any difficulties please let us inform and subscribe the channel.
Please share this helpful video with your friends and social media for helping others
@@FIXNETFLIX ok I do
What may be the cause If both red and blue lights become on when switching on TV and the screen is Black, and doesn't want to switch on?
same problem here,,how did you solve
No fix?
@@victoriamuthoni6923 no solution?
@@MysticMac2.0 I bought another Tv ,I didnt get time to take it to Technician considering availability of Hisense spareparts
My tv blinks blue light continuously
Hitachi tv will Not power on shuts down as soon as the logo flashes on screen. Main LED going to red standby
My TV is just showing the Hisense logo on the screen and the blue power light is blinking but not switching on.
Unplug tv for 5 minutes. Now recheck the issues.
@@FIXNETFLIX my tv doesn’t turn on with blue and red light blinking constantly. Can yoh please help me with it? It Hisense LTDN40D50TS
I have a question I have a Hisense 55 inch I turn it on the screen turns on but it's white no picture what can that be
T con board cheap fix
You show a fuse, but I don’t see one on mine!
I have a highsense 55" led tv that just blinks red 1 long 1 short continuously? I replaced the power board and the problem is the same what now any suggestions?
Did u ever get it fixed? I am having the same issue
Same here. New pwr board no fix. I guess next is Main board?
Two of the led backlights were out so I soldered two new ones on and tested them and they worked so I know it's not the back light.
Christmas music?
Thank u somuch
My tv only on for 1 second and android tv logo then turn off ☹️
Visa solve my problem...buy another tv , and better !!
I’ll turn on my Hisense Tv and I will just make the home noise but it’s still black
Didn’t work🥺🥺😢😢 now I can’t play cuphead
Hi friend, thanks for reaching out. If the method doesn’t work then you required to repair the hardware of tv.
You know this is happening due to incorrect voltage supply from main board.
So please send the tv to service center or repair at home.
Any troubleshooting support needs please feel free to ask me by reply.
If this is helpful please hit the like button and subscribe to the channel.
Kindly share this video with your friends and social media to help others.
Good
Not like as if I can just do any of this myself at home 😒😒😒😒😒
The display is low
Just replaced my Hisense today. Bought it brand new less than 3 years ago. First all 4 HDMI ports simultaneously stopped working, now the tv won’t even turn on. Piece of S**t. NEVER buying this brand again.
Yea they are, mine has lasted 7yrs and now stopped working. Lasted about 6.5 years longer than expected for what I paid
Thanks for nothing!! 🤦