My daughter and I thank you all for the prayers!!! They are felt!!! You guys are awesome and so are you BST!!!❤️❤️ Keep building something Wingnuts!!🙏🙏🙏
Prayers to Cory for sure. I like those old Ford trucks a lot, and with literally millions made, there are still quite a few of them around. I like the look of the 97-04 truck best, and they're the last trucks before they got too big for my taste.
OG always wanted a Bronco since I love fords, I went the Jeep route because my father wanted one ended up with a XJ and WJ both inline 6 4X4. 80’s 90’s 4x4 are best especially since winter coming. Really a game changer it weather gets bad. I pulled out of 20’ inches of snow no problem, you add a locker and or a winch and you can go anywhere on or off road. Sending prayers out to Cory!
Do you have contact, brother? Because I want to ask you about the odometer of a 1994 Mustang, and I want to install it on a Ford Victoria 2001. I saw your clip, but I want to contact you because I installed it and it did not work for me. @@bstfordchannel923
hey brother thank you for stopping by.. I have to give a look see on your channel... None of our small channels getting any traction... Its flooded with good car content out here..
I love these to, I wish I can snag one, but I am on a mission to complete something... I have to build a 4v also .. Just rings and bearings thats it.... mayve some valve stem seals
short bed ford trucks you can get the skins pretty cheap. remember those axles are worth alot of cash exspecailly the locking front hubs parts hint hint.
I heard about the axles for sure.... Now the skins I did know much about but i need the right truck not just a truck..... i will make some deals and see what up
Slow progress o the rides lol Now th ebarke thing are strange you have to double tug them to work, but i have to really bleed them right... and need a longer handle also... Just playing around for now brother Mike...
@@bstfordchannel923 Good news. All the permits are done and they deliver gravel next week, and then the concrete pad. Looks like the shop will be my early Christmas present.
@@MikesGarageRoute66 this is going to be sweet... Just have a budget on a camera cause this will be mega sweet... I wish i can do the same... Bless you on this journey brother Mike
Well brother i have to keep the house ( emtions right ) so there was a long pause ... i was still doing stuff , but the rain was crazy also... I will have to follow suit ( to you bro ) and build a engine ... getting the parts now...
@@bstfordchannel923its kind of crazy to me how we are putting God in our conversation about cars when so many mechanics give off the vibe of alcohol and swearing. Let's keep the faith 🙏❤
@@misermikemodifies3827 God is 1st no matter how crazy we are about cars ( he is 1st! ) We have to blend REAL LIFE and Faith with what we love all together in 1 big pot... We are humans and it doent mean we just ( leave out our faith in our conversations ) we add the bull in convo so we should add a eqaul or more into the convo of good when we chat ass men...
bro if you knew the power a 300 straight six can make. its not the hp that wins its the torque. and they have more torque then hp. build it and use a turbo that thing will roast tires for days. you can rev it higher and push it harder then a v8 ever wanted to go. i had a 200 straight six i i maxed out my 9grand tach and she didnt blow and she drove 1200 miles to another state after. you cant kill them engines
hey whats up Ozzie , very very true secrectly i have been looking for a inline 6 Ford truck... I wish the last one i had had that.....We are on the search very slow to find one EVEN rusty.. Then I can figure out what can be done...
Do you have contact, brother? Because I want to ask you about the odometer of a 1994 Mustang, and I want to install it on a Ford Victoria 2001. I saw your clip, but I want to contact you because I installed it and it did not work for me.
what happened? whats not working? you need pinout for YOUR year car 1st THEN get a pinout for the v8 Mustang Cluster.... Then you start to pinot wire to match from your car to match pinouts in your cluster... Now Tach on your car needs and Autometer 9117 Tach Adapter...
I installed the V8 kit, and I also tried the V6 kit, but the electrician told me that the readings of the wires were different. Do you have a Snapchat or Instagram, brother, so I can send you a more explanatory video? @@bstfordchannel923
I want to install a Mustang meter on a Ford, and I am ready, brother, to give you what you want, but I just want you to help me install it and explain it to me in a clip so that it becomes clearer. @@bstfordchannel923
My daughter and I thank you all for the prayers!!! They are felt!!! You guys are awesome and so are you BST!!!❤️❤️
Keep building something Wingnuts!!🙏🙏🙏
Prayers to Cory for sure. I like those old Ford trucks a lot, and with literally millions made, there are still quite a few of them around. I like the look of the 97-04 truck best, and they're the last trucks before they got too big for my taste.
yes brother and thank you for the prayer for him... I like those broncos also... I am looking fir the special one to get... I would to make cool one
Prayers for our brother, Corey!
OG always wanted a Bronco since I love fords, I went the Jeep route because my father wanted one ended up with a XJ and WJ both inline 6 4X4.
80’s 90’s 4x4 are best especially since winter coming. Really a game changer it weather gets bad.
I pulled out of 20’ inches of snow no problem, you add a locker and or a winch and you can go anywhere on or off road.
Sending prayers out to Cory!
Blessings to Corey and family.
thank you for the blesssing to Corey Chris !
Do you have contact, brother? Because I want to ask you about the odometer of a 1994 Mustang, and I want to install it on a Ford Victoria 2001. I saw your clip, but I want to contact you because I installed it and it did not work for me.
@@bstfordchannel923
Sending Cory extra prayers!! ❤
That old ambulance in the junkyard gives me an idea for an engine swap if it had the power stroke diesel.
ahhhhh share this idea brother i would like to hear this one...
@@bstfordchannel923 I was thinking about taking one of those older Broncos and making it a diesel or maybe even a diesel Crown Vic.
@@merrillschaps2325 i know very little about diesels engines but in a Bronco would be very dope..
@@bstfordchannel923 I have never seen a diesel Bronco before and I think it would be very cool to own a early to mid 90's Bronco with a modern diesel.
BST!!! It looks good over there. We got Cory in our prayers. Be well see you on the next one.
hey brother thank you for stopping by.. I have to give a look see on your channel... None of our small channels getting any traction... Its flooded with good car content out here..
Been a while, Bill! I love those old REAL Broncos!
I love these to, I wish I can snag one, but I am on a mission to complete something... I have to build a 4v also .. Just rings and bearings thats it.... mayve some valve stem seals
short bed ford trucks you can get the skins pretty cheap. remember those axles are worth alot of cash exspecailly the locking front hubs parts hint hint.
I heard about the axles for sure.... Now the skins I did know much about but i need the right truck not just a truck..... i will make some deals and see what up
Looks like some good progress on the cars. I can't wait to see the dual rear calipers working.
Slow progress o the rides lol Now th ebarke thing are strange you have to double tug them to work, but i have to really bleed them right... and need a longer handle also... Just playing around for now brother Mike...
@@bstfordchannel923 Good news. All the permits are done and they deliver gravel next week, and then the concrete pad. Looks like the shop will be my early Christmas present.
@@MikesGarageRoute66 this is going to be sweet... Just have a budget on a camera cause this will be mega sweet... I wish i can do the same... Bless you on this journey brother Mike
@@bstfordchannel923 Thank you
what do you think of the SPRINT BOOSTER and CANSHIFT mods??
Sprint booster is great for the drive by wire deal... Now the canshift ( no ) a good tune should give better shift and fuel to make the car spunky ...
Love the bull nose bronco
Me to i thing they are cool... just need one 1 day... I can even find a torino so lets switvch gears and get a old truck
What's up brother been wondering what was going on with ya
Well brother i have to keep the house ( emtions right ) so there was a long pause ... i was still doing stuff , but the rain was crazy also... I will have to follow suit ( to you bro ) and build a engine ... getting the parts now...
Heavenly Fauther knows and loves you Cory his plan is bigger than all of us.
you said mouth full....Amen...
@@bstfordchannel923its kind of crazy to me how we are putting God in our conversation about cars when so many mechanics give off the vibe of alcohol and swearing. Let's keep the faith 🙏❤
@@misermikemodifies3827 God is 1st no matter how crazy we are about cars ( he is 1st! ) We have to blend REAL LIFE and Faith with what we love all together in 1 big pot... We are humans and it doent mean we just ( leave out our faith in our conversations ) we add the bull in convo so we should add a eqaul or more into the convo of good when we chat ass men...
Blessings to Corey....This a tough deal man... I have to reach out to him and see where he is mentally
bro if you knew the power a 300 straight six can make. its not the hp that wins its the torque. and they have more torque then hp. build it and use a turbo that thing will roast tires for days. you can rev it higher and push it harder then a v8 ever wanted to go. i had a 200 straight six i i maxed out my 9grand tach and she didnt blow and she drove 1200 miles to another state after. you cant kill them engines
hey whats up Ozzie , very very true secrectly i have been looking for a inline 6 Ford truck... I wish the last one i had had that.....We are on the search very slow to find one EVEN rusty.. Then I can figure out what can be done...
Was that O.J. Simpson's white Bronco?
lmao I am sure that bronco a Collectors has worth 2 million I bet
Do you have contact, brother? Because I want to ask you about the odometer of a 1994 Mustang, and I want to install it on a Ford Victoria 2001. I saw your clip, but I want to contact you because I installed it and it did not work for me.
what happened? whats not working? you need pinout for YOUR year car 1st THEN get a pinout for the v8 Mustang Cluster.... Then you start to pinot wire to match from your car to match pinouts in your cluster... Now Tach on your car needs and Autometer 9117 Tach Adapter...
I installed the V8 kit, and I also tried the V6 kit, but the electrician told me that the readings of the wires were different. Do you have a Snapchat or Instagram, brother, so I can send you a more explanatory video?
@@bstfordchannel923
I want to install a Mustang meter on a Ford, and I am ready, brother, to give you what you want, but I just want you to help me install it and explain it to me in a clip so that it becomes clearer.
@@bstfordchannel923
if your lowering to do it correct that shock needs to be shorter come on bro lets not do this poorly do it right. i know it sucks.