ไม่สามารถเล่นวิดีโอนี้
ขออภัยในความไม่สะดวก
Veto Pro DP3 Drill & Tool Pouch... or a Meter Pouch!
ฝัง
- เผยแพร่เมื่อ 26 พ.ค. 2024
- Just got in my DP3 from Veto Pro Pac.
I haven't used it much yet, but I wanted to go ahead and share the features of the pouch and show you a example Loadout. That way if you are on the fence you will get an idea if you need to pull the trigger on any of these bags before the Spring promotion ends.
Let me know what you think, or if you have any questions in the comments below. Thanks for watching!
The following are links to products shown in the video. Links marked (Affiliate Link) are Amazon Affiliate Links for Items in the video. I participate in the Amazon Associates Program and make a small commission if you purchase using this link at no cost to you. Thank you for your Support!
I am also working on an Amazon Store with list of tools like my favorites, etc. You can check out what I have so far here - www.amazon.com...
Also, if you would like a link for something else you see in the video, let me know and I will post it here as well.
Veto Spring Promotion (Non-Affiliate Link) - vetopropac.com...
Amazon Links for Veto Products below for Info or if Promotion is Over - Recommend Using Veto for Promotion
DP3 (Affiliate Link) - amzn.to/4dPPPbx
TPLD (Affiliate Link) - amzn.to/3USrysz
MP1X (Affiliate Link) - amzn.to/44WXC37
MP2X (Affiliate Link) - amzn.to/3QUueoo
Holstery Joey Pouch (Affiliate Link) - amzn.to/3USPZ9s
Klein Hollow Nut Driver Impact Set (Affiliate Link) - amzn.to/4bRzW2i
Klein Belt (Affiliate Link) - amzn.to/3KgyI5c
Fluke T6 100 Pro (Affiliate Link) - amzn.to/3yHkdob
Klein NCV (Affiliate Link) - amzn.to/3Kct2cn
Hultafors Pencil (Affiliate Link) -amzn.to/3yrVRPc
Wiha Picofinish (Affiliate Link) - amzn.to/4buY7UC
Knipex Electrical Installation Pliers (Affiliate Link) - amzn.to/4bOUwAC
Klein Impact 11-1 (Affiliate Link) - amzn.to/3WOzA8x
Klein Impact 11-1 (Lowes Non-Affiliate Link) - www.lowes.com/...
#maintenance #carpentry #hvac #electricial #construction #vetopro #deals #springpromotion #electric #hvac #plumbing #lowvoltage #fluke #knipex #wera #milwaukee #topdon #mb5b #techmct #sbld #tplc #tpld #dp3 #mp2x #mp1 #multimeter
I use the Toughbuilt electricians pouch for one of my meters and hang it off the side of a Velocity bag. When I was using the TP4B, I could get my Kewtech voltage tester in the front pouch, I can also get it in one of the side pouches of the SD-LB, but they are quite large for belt mounted pouches.
Interesting to see the different uses people have for the pouches 👍👍.
This one’s a little bigger than I would want. My home is someday they make a MP pouch with one bigger slot for a meter, couple screwdrivers, couple pliers.
Nice ; good review !
Appreciate it 👍
Thank you so much for this! I’m an HVAC tech and got the MB3B for my probes and iPad and I had a TP-XL for most of my other tools but I needed something smaller for my quick check DP3 that you’re showing. The Meter with the drill in the photo is brilliant. I love that, I’ll use my smaller meter rather than my Fieldpiece 680, so it’s perfect.
I’m back and forth with the HVAC 8-in-1 or the impact 11-in-1, but I’d want to get a valve core removal bit to replace the square.
Yeah Veto makes a lot of stuff to store meters in, but not really to use them back/forth with “quick grab”
This isn’t perfect for me, but something I can use till I find it.
I have tried to use this more effectively but due to the weird angle and the tool pockets and the super tall nature of it with the clip I use it on a dB 701 vest as a primary side pouch. I'm glad I can use it someplace but thoes few things kinda make me want a version 2 for sure. I think like many others said in its current form with a plastic piping bottom maybe a cutout just for the driver part would make it a better service bag kinda a tp3 with the space for drill. They could have almost sewn a addon to a tp3 and got what we are asking for. It is what it is and not complaining as much as if veto us listening they could make the product we want. Even a little baby cobra buckle for the securing strap in the holster would be neat! We all know we will buy the new shiny its the veto way 😆.
It was the drug they gave us to get us in a new bag 😂
Nice look at this pouch. You're using it much the way I have my TP3B set up; the meter would fit nicely in the large front compartment (I have a folding work light in mine). In a few minutes, I'm going to go try this setup in the DP3 since I use it as an indoors bag so I don't care about the plastic base.
Right now I'm using a DP3 for emergency car tools; I have a jump-starter in the big rear pocket.
Yeah, I used to carry my meter in my 4B much the same way. I never liked wearing the ones with the plastic bases as pouches, but they make really great “bags” to carry by hand and set down.
I stole a back from one of my Cliptech pouches and installed it on my DP3 so I can clip it on and off. I am just not a fan of running it through a belt to take it off and on. I use the little belt clip to attach it to the side of my TP XXL and that works great.
It’s not my ideal situation with the belt, but I don’t mind it as long as I just leave the belt in it. I also won’t use it super often over my MP pouches
The clip does work good to put it on a bigger bag.
If you use mad pack holder can slip it over your belt and it stabilizes the dp3 a little better
Yeah I just thought about using that today. I will likely use that instead of a belt. Then I will have a handle as well.
Thanks 👍👍
Great video. I have been scratching my head wondering why Veto has never made a belt pouch designed for electrical. I cant tell you how many pouch variations I have tried over the past 30 years. I have broken my electrical pouches into two parts. My belt pouch is the Tough Built small electrician pouch. I like it because I can put my Dewalt Gyro in it and retrieve it easily. I also keep the tools I use the most in it. I am pushing 65 years of age and I dont do heavy belt pouches anymore. This pouch is light weight and I can wear it all day. it's set up to do minor electrical like ceiling fans, light fixtures outlets and switches. That type of stuff. When I'm done, I hang it on the end of the shelving unit in the van. I take the SB-LD pouch in when I am doing more extensive electrical work. It obviously holds more tools and meters. Bottom line for me, I only put light weight pouches on my hips and carry or roll the rest of it. I see workers all the time with 20 pounds of tools hanging off their body and trust me, it will catch up to them. Keep up the great vids and let me know when you find the perfect pouch.
Yeah things change as you get older for sure… you wish you wore knee pads more, ear plugs, etc.
That’s like carpenter belts, I’ve moved to stuff where they are easy to take parts on/off instead of wearing something all day long and only using 1/4 of it at a time.
THIS!! I can't imagine wearing even ten pounds of tools on my belt for any length of time. I've decided I might get myself a MPX; that's the biggest I'd want to carry around.
I a long time ago hating standard tool belts went to beltless/vest systems myself. My heavy framing rig is occidental leather beltless system (there are plenty of videos out there). My medium roof rig is a knockoff of occidental leather suspendavest but that has changed to diamondback 701 lately. The common goal is to ditch that weight on my waist and put it on my shoulders. The other nice thing is the setups flow and move with you instead of being stiff. I agree 20lbs all day is just torture unless your use to it but it's like doing concrete for a living it will kill you. Pouches are the same way the dp3 is a bit too heavy to wear if they did a clip system it would need 2 on the back.
Don't do the mpx. The mp2x us only a little bigger and I bet you'll wish you had more room really soon. I got the mpx and regretted it had to wait on backorder for a mp2x. Everything is a seprate pouch is much better than double stuffed just resist and underfull your pouch. Save 70 bucks learn from my mistake we always think we can use less when we really want more!
@@MattHmm-rq6dn I have moved to the Atlas Vest, like you I like the weight on my shoulders better than my waist. It’s also easier to take stuff on/off throughout the day as you aren’t using to lighten up throughout the day.
Just looked on vetos site there is a new drill pouch (DH2X) which they have a picture of a meter in it. Closed or open bottom on it. Not sure if it would stand up by its self tho.
That one looks a little smaller so it could be better. Not sure what all tools you could fit in it.
Mine says out of stock… so it’s probably coming soon
Hi Joey good video again
One thing I noticed a few times in your tool pouch videos is your putting your pica pencil into a pocket
On my mp1x I clip it with the clip on the pica holder to the outside of a pocket
Same with my fastback
Basically any thing small I can clip on i do and save the slot for a other tool or bit etc
It’s only a little thing but it noticed it a few times and it kinda bugged me 😂😂
Have a great week
I do that on my MPX because I don’t have enough slots. I do that with my knife and flashlight generally.
I move stuff around when I need slots though, I’ve had my MP2X looking like an MCT off my side before 😂
Was just a thing I noticed that I my mind did not make sense lol
And yea that is one great thing about the mp1x day to day or even hour to hour the layout changes to the use
And I hardly ever run out of slots
More often then not it’s either just right or I have room left
So I’m very glad I did not go for the mp2x
I personally like my tracer and pica pencils in a pocket myself. The only thing I may clip on is a utilty knife? Regardless I've had the sleeves pull up and fall on the ground at odd times like over a open hole or crawling under or over things. Since there 12 to 16 bucks each I'm not gonna loose them over a extra slot in my pouch.
I was watching a hvac youtuber that veto reached out to. He said that veto just couldnt understand why we would want our meters out and exposed and not in the new sd's rear zipper pouch. Hopefully it clicks for them and they make a dedicated meter slot in a dp3 similar pouch. I had the same idea for the dp3 but its comical how tall it is with the belt loop. It almost needs a leg strap at the bottom like a thigh holster.
For storage having it put up makes sense… but if we are physically using them in combination with tools we need somewhere to put them while we switch back and forth 🤷♂️
Yeah with the clip it’s not wearable in my opinion. It’s a belt through the loop only for me.
When I got mine I almost wanted to cut that top off 😆.
Don't like it one little bit, sorry Veto 😂
@@iangregoryhome worth a try, but it’s not 100% what I want. Something to takes its place till I find it 😂
Seeing as how I have to critique it in some way... 😂
it would be near perfect if it had a plastic bottom.
DON'T CUT the flap or you'll void the warranty.
Great use of the bit holder as a parts pocket.
I would want the plastic bottom if I was going to use mostly as a “bag type” pouch. If I’m wearing it, I have never likes it on the TP3B and ended getting a TP3
I think more people will use it as a pouch bag than wear it
I threaded my Klein belt through my TP3B, but I actually undid the clip side and re attached it. I’ll leaving it in permanently because I too like the way it hangs off of the belt better. Great video as always. ❤
Yeah the clip of any of the TP pouches to me are for clipping it to a bag and not a person. It makes them all way too high.
Appreciate my friend 👍👍
Good place to stash an M12 impact !
It does fit in it pretty nice. Better than most other “drill holsters” I’ve tried
I’ve grown to like the Toughbuilt clip system and have been cannibalizing and putting Toughbuilt clips on other pouches.
Many people respond on here that they use them. For the price, they are probably hard to complain about. Seem like a good option
If you want a all metal version of the toughbuilt clips that can be modified to work with any current toughbuilt products check out prolock. Simply filing down the wings a 1/4 in you get a all metal clip that sits flatter slimmer and closer to the body. I took a prolock tool belt for 30ish dollars and used it for clip sets to put on other things.
I have to get in some pretty weird places a lot of the time, crawl spaces, tight attics and such, was looking for something that doesn’t stick out too bad, do you think this would get in the way and if so would the MPX or 1X be better? I have to fit termination tools and some basic drivers (usually just use a multi bit driver) and either a cable stapler or my M12 drill or impact.
This sticks out quite a bit. I don’t think it is what you are looking for.
The MPX is the least, but only fits a few tools. The MP1x doesn’t stick out that much farther and gives you a little more options making it more versatile.
The only advantage to the DP3 would be for your M12, but I normally carry mine on the tape clip, or I just clip it on somewhere separate from my pouch.
@@MORGANSMaintenance THANKS! Any suggestions for a good clip on soft pouch or case for my CAT6 Plugs and boots?
@@cartharax4308 I don’t have anything I currently use, but maybe someone else will chime in… I was trying to think if I had seen something in the guess the trade. If I see something I will let you know
@@MORGANSMaintenance Thanks again, I'll keep looking also, would help if I wasn't so damn picky.
🇺🇲🦅🇺🇲🦅🇺🇲
Appreciate it Ted! Changing it up for the holiday… I like it 👍
Happy Memorial Day!
@@MORGANSMaintenance Thanks 😎⚒️😎⚒️😎
I can appreciate the change up 👍
Does the M12 installation driver fit in the drill pouch?
Yes it does; that's how my wife has hers.
I would have assumed no without TPG’s response. It will go down in it somewhat, not the same as depth (and as secure) as the Surge because of the DHandle, but it does slide in somewhat.
@@MORGANSMaintenance I sent you an email with pic of hers with the Installation Driver in it; and mine with my TP-3B tools moved into it. It is a little bigger than the TP3B, so a larger pair of groove-joint pliers fits better, and it has room to include a parts box in the back pocket.
@@OnusBones I got those. Appreciate it
Don't like the side pockets that angle out the tools.
I noticed that too while I had them loaded.
I haven’t used it enough to know how much I won’t like it yet, but the MP pouches are much better for just tools for sure. The tools aren’t as spread out so it’s more compact… but they won’t hold a drill or meter, so it’s give/take I guess.
Completely agree that's one thing I'd change like with the comical tall belt height. Thoes tools are bound to hit something and spin you around at that angle why.?.
@@MattHmm-rq6dn That's a another tell that this one is best carried (maybe clipped to another bag), not worn.
Sorry, but I have to:
Pouch influencer.
I almost have as many pouches as screwdrivers 😂