Slingshot
ฝัง
- เผยแพร่เมื่อ 1 ต.ค. 2024
- After my recent success welding rasps together I decided to try again and this time make a slingshot. See how it turns out and if i'm any good using it!
My Amazon pages with some of the tools and equipment I use in my videos.
UK: www.amazon.co....
US: www.amazon.com...
Etsy store: www.etsy.com/u...
#GaryHuston #Farrier #Blacksmith #welding #engineering #fabrication #horseshoeing #defender
might've been that the rubber bands were causing the wonky shots. If the rubber was fraying unequally on either side, it might've caused one side of the sling to accelerate faster than the other, causing the ball to release inconsistently, since the release mechanism of a pouch is reliant on both sides of the pouch pulling away perpendicularly to the angle of the shot to transfer the energy efficiently/correctly. perhaps look at some of Joerg Sprave's slingshot videos, I believe he mentions the type of rubber he prefers, and he's been making slingshots since all but antiquity. All in all though a beautiful build, keep up the good work, really inspiring stuff!
could be, but I've moved on, that was a couple of weeks ago!
You know what Gary ! . . I don't care how lousy a shot you are, cause I'm not much better ! . . I do love your shop and I find you yourself, quite entertaining - I also love your casual relaxed style of doing stuff ! CHEERS!
Thats a nice slingshot i like the GH on your right arm as well
Bike jacket for welding !...........I use double breasted chef's jackets, heat proof and cheap
Mine was cheap as chips from the charity shop!
Nice slingshot
Oh, if you take the time to have some fun you'll make out ok. There are lots of you tube shooters who can show you. Fowlers makery and mischief in my area. Bill Hayes and Simple Shot Academy to name just a few. I have one to play with at 65 so don't be shy.
I'm a tube man, always use them on my cattys. The tubes that your using seem to large for the catty, try using a smaller diameter. Reason for the rubber getting holes, could be two things. Have you kept the catty in the sun or let it get wet? Light an moisture are the fastest way to perish tubes or flats. Secondly check your fork tips, if you have even a dull edge that cause excess friction and cut into the tubes. Try matching the size ammo to the size of band rig, that increase accuracy.....practice, practice, practice
Hi Gary. Have some ideas on the rubber failure and miss fires
Your fork gap is to small. As you fire it, there is not enough room for the rubbers, patch and ammo can't fit into the gap.
If you open the gap by approx 40% and cut the patch size in half I think you will find a vast improvement.
It is a great design and looks the goods. Keep up the great content and look forward to any changes with more videos
It could be all or any of those things. That was weeks ago and I've moved on to other things. It has been put in the draw with all my other projects that never see daylight again!
What is the total cost of this little gem , number of hours included ?
Sorry, I don’t remember, it was a very long time ago!
Bullet proof .
Let me show you its features
Well made bit of fun there. Lots of fun and inexpensive. Might produce meat for the cookpot as well. Thank you for sharing.
Great vidoes Gary, As kids we made Catty's (catapults) just the elastic and a pouch (used the leather tongues off shoes) We attached the Lazzy (It was called Donkey lastic, don't know why) and it had a square profile. We attached it to the pouch by pulling it tight and wrapping copper wire around to hold. Worked a treat, used it by holding the two ends of the "Lazzy" and over the top of your thumb. When you didn't quite get it right, your thumb knew about it.
Great
Well done, perfect and clean, great and brilliant work, detailed and precise, no flaws, perfect work, beautiful product, great , respect from old Bulgaria!!!
p.s. When I was a kid I made many types of slingshots and they were great, great weapons!!!
The tubes are way too thick for accuracy.
Also pulling the bands over the top of the fork should stop the bands hitting the fork and damaging them
I was absolutely amazed as soon as you welded the Razo together 🤯. Astonishing how fast you were able to do it so well so quickly tremendous job hats off and beers and cheers up to you Brother🍻
Gary you know what the indians cal a vegaterian bad hunter. Just kidding i'm sure i could'nt do any better. looks good tho
Fine craftsmanship, I think you'd your slingshot accuracy would improve with practice and flat-bands!
Thanks
The tube quality is not very good and also try keep your thumb straight...👌
Look up "Slingshot sniper tr" for the no comment video tutorial 🎯💯👌😎
Great idea might be fun and fancy is enough to please me
Thanks
Good steel sure does make pretty strings of swarf with a sharp bit
What a great slingshot! Well made👏
Where did you buy the sanding drums and sleeves from please ? Thank you mate
Here www.abtec4abrasives.com/spiral-bands-and-cones-638-c.asp
Are you hitting the board at all
Nice Slingshot 👍
Thanks 👍
Incredible work! Stunning and will last forever!
Thank you very much!
Just bought a milbro
железная пластина не нужна, об нее латекс разбивается
No sirve es porquería!!!
What a beautiful slingshot. Gary, do you keep fit outside of the farrier/blacksmithing world? I see you have very strong arms but you're also quite vascular, do you run or cycle?
No, I don't do anything outside my day job!
@@garyhuston well, you look well! How's the work during lockdown?
Pretty much just the same , a little quiet but still working.
Have a look at game keeper John
Great job
the bands looks as if they are old or have been exposed to high heat
No idea, they came from Amazon a few days after I started the build.
Buy an air rifle! :-D
It's amazing.
Well...Missing target, Eating up the rubberbands and 41 min, long video. Why?
Because I can!
@@garyhuston Okay. Well, the video is not very flattering about you and your knowledge. Was just why I was wondering why.
@@RoarIsaksen1959 I have absolutely zero knowledge about slingshots which is why I made the video as a learning curve, it's not for your benefit!
@@garyhuston Okay. I was looking for video for my benefit to learn more about slingshot. I thought your video was such an instructional video. I don't quite understand the part about posting a video about your own learning process. Or how such a thing is useful apart from feedback with criticism regarding mistakes that you make.
I like
Kool
Great job, as always, Gary. 👍
Many thanks
Nice job
Thanks!
Cracking job,,,new sub 💥🍺
Thanks for the sub!
@@garyhuston Right down my street mate , your welcome
OK very good 😐😀😛😍
Did you leave the file hardened?
No, as you will have seen in the video it was heated up to flatten it then just left to cool which in effect annealed it so it was easy to drill. I didn’t re harden it.
It's a catapult, not a slingshot. A slingshot is totally different!
Educate us all then!
Its a slingshot, not a catapult. A catapult is totally different!
Will one of you elaborate so we all know!